Atjaunināt sīkdatņu piekrišanu

E-grāmata: 32nd European Symposium on Computer Aided Process Engineering: ESCAPE-32

Edited by (Laboratoire de Genie Chimique, Universite de Toulouse, Toulouse, France), Edited by (Professor, Laboratoire de Genie Chimique, Universite de Toulouse, France)
  • Formāts: PDF+DRM
  • Sērija : Computer Aided Chemical Engineering
  • Izdošanas datums: 30-Jun-2022
  • Izdevniecība: Elsevier - Health Sciences Division
  • Valoda: eng
  • ISBN-13: 9780323958806
Citas grāmatas par šo tēmu:
  • Formāts - PDF+DRM
  • Cena: 558,83 €*
  • * ši ir gala cena, t.i., netiek piemērotas nekādas papildus atlaides
  • Ielikt grozā
  • Pievienot vēlmju sarakstam
  • Šī e-grāmata paredzēta tikai personīgai lietošanai. E-grāmatas nav iespējams atgriezt un nauda par iegādātajām e-grāmatām netiek atmaksāta.
  • Formāts: PDF+DRM
  • Sērija : Computer Aided Chemical Engineering
  • Izdošanas datums: 30-Jun-2022
  • Izdevniecība: Elsevier - Health Sciences Division
  • Valoda: eng
  • ISBN-13: 9780323958806
Citas grāmatas par šo tēmu:

DRM restrictions

  • Kopēšana (kopēt/ievietot):

    nav atļauts

  • Drukāšana:

    nav atļauts

  • Lietošana:

    Digitālo tiesību pārvaldība (Digital Rights Management (DRM))
    Izdevējs ir piegādājis šo grāmatu šifrētā veidā, kas nozīmē, ka jums ir jāinstalē bezmaksas programmatūra, lai to atbloķētu un lasītu. Lai lasītu šo e-grāmatu, jums ir jāizveido Adobe ID. Vairāk informācijas šeit. E-grāmatu var lasīt un lejupielādēt līdz 6 ierīcēm (vienam lietotājam ar vienu un to pašu Adobe ID).

    Nepieciešamā programmatūra
    Lai lasītu šo e-grāmatu mobilajā ierīcē (tālrunī vai planšetdatorā), jums būs jāinstalē šī bezmaksas lietotne: PocketBook Reader (iOS / Android)

    Lai lejupielādētu un lasītu šo e-grāmatu datorā vai Mac datorā, jums ir nepieciešamid Adobe Digital Editions (šī ir bezmaksas lietotne, kas īpaši izstrādāta e-grāmatām. Tā nav tas pats, kas Adobe Reader, kas, iespējams, jau ir jūsu datorā.)

    Jūs nevarat lasīt šo e-grāmatu, izmantojot Amazon Kindle.

32nd European Symposium on Computer Aided Process Engineering: ESCAPE-32 contains the papers presented at the 32nd European Symposium of Computer Aided Process Engineering (ESCAPE) event held in Toulouse, France. It is a valuable resource for chemical engineers, chemical process engineers, researchers in industry and academia, students and consultants for chemical industries who work in process development and design.
  • Presents findings and discussions from the 32nd European Symposium of Computer Aided Process Engineering (ESCAPE) event
VOLUME 1
Preface xv
Theme Coordinators xvii
T1: Modelling and Simulation
1 Periodic Oscillations in Methane Reactor: Effects of the Main Operating Parameters
1(6)
Piero Bareschino
Alberto E. Cutillo
Claudio Tregambi
Francesco Pepe
Gaetano Continillo
Erasmo Mancusi
2 Modeling and Simulation of Non-Isothermal Ceramic Drying
7(6)
Achilleas L. Arvanitidis
Margaritis Kostoglou
Michael C. Georgiadis
3 Numerical study on the solid phase residence time distribution in a counter-current screw extractor
13(6)
Annemarie Lehr
Gdbor Janiga
Andreas Seidel-Morgenstern
Dominique Thevenin
4 Dynamic modelling of light and temperature effects on biomass growth and biohydrogen production by the photosynthetic bacterium Rhodopseudomonas palustris
19(6)
Bovinille Anye Cho
Brandon Sean Ross
Jan-Pierre du Toil
Robert William Mcclelland Pott
Ehecatl Antonio Del Rio-Chanona
Dongda Zhang
5 Reducing the experimental effort to design pharmaceutical tablet lubrication by model-based design of experiments
25(6)
Francesca Cenci
Gabriele Bono
Charalampos Christodoulou
Yuliya Vueva
Simeone Zomer
Massimiliano Barolo
Fabrizio Bezzo
Pierantonio Facco
6 A model-based approach to predict the flowability of directly compressed pharmaceutical blends from individual components
31(6)
Gabriele Bono
Magdalini Aroniada
Yuliya Vueva
7 Purification of MIBA by Continuous Distillation
37(6)
Pavan Veldandi
Ralph Cos
David Earp
8 Modelling of Organophilic Pervaporation for Separation of Acetone-Butanol-Ethanol Mixture
43(6)
Andras Jozsef Toth
9 Development of Deep Learning Architectures for Forecasting Distillation Columns Dynamic Behavior of Biobutanol Purification
49(6)
Abraham Rodarte de la Fuente
Eduardo Sanchez-Ramirez
Martha Patricia Calderon-Alvarado
Juan Gabriel Segovia-Hernandez
Esteban A. Hernandez-Vargas
10 Impact of Methanol Synthesis Kinetics on Bulk Production Prediction: an In-Silico Assessment
55(6)
Filippo Bisotti
Matteo Fedeli
Carlo Pirola
Giulia Bozzano
Flavio Manenti
11 Optimal layout of modular multi-floor process plants using MI LP
61(6)
P. Wrigley
P. Wood
S. O'Neill
R. Hall
S. Marr
D. Robertson
12 Paving the way to multi-case optimization of a steam Rankine cycle for cogeneration in nuclear power plants
67(6)
Guilherme Vescovi
Nicolas Alpy
David Haubensack
Catherine Azzaro-Pantel
Pascal Stouffs
13 Dynamic modelling of non-isothermal open-cell foam catalyst packings: selective sugar hydrogenation to sugar alcohols as a case study
73(6)
Catarina G. Braz
Ali Najarnezhadmashhadi
Vincenzo Russo
Kari Erdnen
Henrique A. Matos
Tapio Salmi
14 Optimising a wind farm with energy storage considering curtailment and uncertainties
79(6)
Flora A. V. Biggins
Jude O. Ejeh
Diarmid Roberts
Aaron S. Yeardley
Solomon F. Brown
15 Optimisation of Biofuel and Kerosene Fuel Blends to Support Sustainable Aviation
85(6)
Ridab Khalifa
Mohammad Alherbawi
Adel Elomri
Tareq Al-Ansari
16 Dynamic Surrogate Modeling for Continuous Processes Control Applications
91(6)
Alessandro Di Pretoro
Andrea Tomaselli
Flavio Manenti
Ludovic Montastruc
17 Probabilistic machine learning based soft-sensors for product quality prediction in batch processes
97(6)
Max Mowbray
Aaron Hicks
Harry Kay
Sam Kay
Amanda Lane
Cesar Medonza
Philip Martin
Dongda Zhang
18 Property Estimation Method for Cannabinoids and Terpenes Using Machine Learning
103(6)
Laura A. Vergara
Hector J. Hortua
Gustavo A. Orozco
19 Kinetic modelling of y-linolenic acid production by Cunninghamella echinulata
109(6)
Ziqi Song
Alexander Rogers
Bovinille Anye Cho
Keju Jing
Dongda Zhang
20 Techno-economic and environmental analysis of pyrolysis process simulation for plastic (PET) waste
115(6)
Muhammad Shahbaz
Ahmed Ainouss
Gordon Mckay
Hamish Mackey
Tareq-Al Ansari
21 Monte Carlo Simulation of the Mechanical Processing of Bulk Materials with Fluctuating Compositions - Compositional Probability Density
121(6)
Karim Khodier
Tobias Krenn
Lisa Kandlbauer
Lisa Tatschl
Renato Sarc
22 Determination of the burst pressure of pillow plates using finite element methods
127(6)
Alexander Zibart
Bernhard Spang
E. Y. Kenig
23 A hybrid multi effect distillation and double reverse osmosis system for most economical brackish water desalination
133(6)
O.M.A. Al-hotmani
Mudhar A. Al-Obaidi
Y.M. John
Raj Patel
Iqbal M. Mujtaba
24 Computational intelligence applied to the mathematical modeling of enzymatic syntheses of biosurfactants
139(6)
Alice de C. L. Torres
Rafael A. Akisue
Lionete N. de Lima
Paulo W. Tardioli
Ruy de Sousa Junior
25 A Practical Guide to Coffee Roaster Modelling
145(6)
Cameron E. Bolt
Philip L. de Vaal
26 Modeling and simulation of anoxic-aerobic algal-bacterial photobioreactor for nutrients removal
151(6)
Irina Bausa
Raul Muuoz
Smaranda Podar
Cesar de Prada
27 Gaussian-Process based inference of electrolyte decomposition reaction networks in Li-ion battery failure
157(6)
Dr. Peter J. Bugryniec
Aaron Yeardley
Aarjav Jain
Nicholas Price
Dr. Sergio Vernuccio
Dr. Solomon F. Brown
28 Energy evaluation of processes for the production of hydrogen from biomass biodigestion under Aspen Plus
163(6)
Lokmane Abdelouahed
Fatma Kourdourli
Bechara Taouk
Lionel Estel
29 Life cycle optimization of energy systems integrated with carbon capture and utilization
169(6)
Iasonas Ioannou
Alex Mercandetti
Gonzalo Guillen Gosalbez
30 A comparative study of swarm intelligence and artificial neural networks applications in modeling complex reaction processes
175(6)
Mm Wu
Ulderico Di Caprio
Furkan Elmaz
Bert Metten
Dries De Clercq
Olivier Van Der Ha
Siegfried Mercelis
Peter Hellinckx
Leen Braeken
M. Enis Leblebici
31 Combined optimization of start-up shutdown and grade transition of a multistage continuous crystallization process
181(6)
Jiaxu Liu
Brahim Benyahia
32 Systematic dynamic modelling of heat exchanger network
187(6)
Bertrand Zitte
Isabelle Pitault
Boussad Hamroun
Francoise Couenne
33 Technical and economic assessment of a castor bean biorefinery to produce renewable aviation fuel: a computer-aided design
193(6)
Araceli Guadalupe Romero-Lzquierdo
Claudia Gutierrez-Antonio
Fernando Israel Gomez-Castro
Salvador Hernandez
34 SiCN fibers as advanced materials for electromagnetic shielding in X-band: experiments and computational modelling and simulation
199(6)
Heloisa Ramlow
Liangrid Lutiani da Silva
Braulio Haruo Kondo Lopes
Mauricio Ribeiro Baldan
Ricardo Antonio Francisco Machado
35 Continuous-Time Surrogate Models for Data-Driven Dynamic Optimization
205(6)
Burcu Beykal
Nikolaos A. Diangelakis
Efstratios N. Pistikopoulos
36 Parameter estimation in dynamic metabolic models applying a surrogate approximation
211(6)
Rafael D. de Oliveira
Dielle P. Procopio
Thiago O. Basso
Galo A.C. Le Roux
37 A Benchmark Model to Generate Batch Process Data for Machine Learning Testing and Comparison
217(6)
Margarida L.C. Vicente
Jose F.O. Granjo
Ruomu Tan
Franz D. Bdhner
38 Global warming impact of electric city buses in Chile: Critical stages of their fabrication and use
223(6)
Guillermo Valenzuela-Venegas
Daniel Pena-Torres
Franco Lizama-Valenzuela
Melanie Colet-Lagrille
39 Sustainable Ammonia Production via Electrolysis and Haber-Bosch Process
229(6)
Gbemisola Ojo
Kyle Camarda
40 Optimization for sustainable hydrogen production path
235(6)
Patience B. Shamaki
G.A.C. Le Roux
41 Development of lactic acid evaporation process model with multi effect evaporator and mechanical vapor recompression system
241(6)
Sujin Cha
Jonghun Lim
Yurim Kim
Hyungtae Cho
Il Moon
Junghwan Kim
42 Optimization-Based Framework for Robust Modeling and Design of Kinetic Systems
247(6)
Eduardo Sanchez-Ramirez
Brenda Huerta-Rosas
Juan Jose Quiroz-Ramirez
Victor Alejandro Sudrez-Toriello
Juan Gabriel Segovia-Hernandez
43 Optimal Control System For Products Quality from a Deethanizer Column
253(6)
Cristian Patrascioiu
Nawwar A. Rahman
Marian Popescu
44 Importance of detailed experimentation in the model based design and scale up of pharmaceutical spray dryers for heat sensitive products
259(6)
P. Martin-Salvador
T. De Beer
A. Kumar
45 Process modelling of Direct Air Capture (DAC) of CO2 using solid amine sorbents
265(6)
So-mang Kim
Gregoire Leonard
46 Mechanistic modelling for thrips incidence in organic banana
271(6)
Jean C. Campos
Jose Manrique-Silupu
William Ipanaque
Bogdan Dorneanu
Harvey Arellano-Garcia
47 A novel approach to modelling trickle bed reactors
277(6)
Bogdan Dorneanu
Norbert Heinzelmann
Klaus Schnitzlein
Harvey Arellano-Garcia
48 Alkaline Water Electrolysis Model to Purify GMP grade NaOH Solutions for Biopharmaceutical Manufacturing Processes
283(6)
Yeonghyun Kim
Youngjin Kim
Jae Hyun Cho
Il Moon
49 Effect of air dynamics on the discharge of a pharmaceutical powder using the discrete element method
289(6)
L. Naranjo
I. Nopens
T. De Beer
A. Kumar
50 Biorefinery modelling is in tatters, and here is why
295(6)
Robert Pujan
Heinz A. Preisig
51 Simulation of a Fischer-Tropsch reactor for jet fuel production using Aspen Custom Modeler
301(6)
Alejandro Morales
Gregoire Leonard
52 Techno-economic-environmental analysis of a microbial oil production integrated into a bioethanol sugarcane biorefinery
307(6)
Andreza Aparecida Longati
Felipe Fernando Furlan
Roberto de Campos Giordano
Ever son Alves Miranda
53 Modeling the hydrodynamic sizing and rating of reactive packing in Aspen Plus
313(6)
Andressa Neves Marchesan
Ingrid Lopes Motta
Rubens Maciel Filho
Maria Regina Wolf Maciel
54 Simplified Model-based Design of Plate-fin Microdevices with Uniform Flow Distribution at High Flow Rates
319(6)
Osamu Tonomura
Kaori Maenaka
Shinji Hasebe
55 CFD-based study of fluid flow and transport phenomena in fixed bed compact reactors
325(6)
Osamu Tonomura
Akihiro Kitagawa
Kazuki Kato
Taisuke Maki
Ken-Ichiro Sotowa
56 Multicomponent, nonisothermal VOC adsorption modelling for pharmaceutical effluent purification: effect of operating conditions on bed performance
331(6)
Vasiliki E. Tzanakopoulou
Alexandra Costa
Daniel Castro-Rodriguez
Dimitrios Gerogiorgis
57 Hydrogen Separation via Continuous Hydrate Formation
337(6)
Marcelino Artur L. Fernandes
Mariana G. Domingos
Fernando G. Martins
Isabel S. Fernandes
Marcelo F. Costa
Ricardo J. Santos
Jose Carlos B. Lopes
58 Combined particle model and experimental approach for predicting pyrolysis with palm kernel shells
343(6)
Andres Chico-Proano
Michelle Romero
Ricardo A. Narvdez
Boris G. German
Daniel Rivadeneira
George Manos
Lazaros G. Papageorgiou
Eric S. Fraga
59 Methanation of CO2 byproduct from an ammonia plant with green hydrogen
349(6)
Samuel Asante
Mark W. Hlawitschka
Robert Schlesinger
60 Uncertainty analysis applied to distillation columns calculations
355(6)
Leonardo O. S. Santana
Ewerton E. S. Calixto
Fernando L. P. Pessoa
61 Gas diffusion channels in Li-Ch batteries: a comparison of wet and flooded electrodes
361(6)
Jean Felipe Leal Silva
Gustavo Doubek
Rubens Maciel Filho
62 Techno-economic analysis of flexible AP-X LNG production process under risks and uncertainties
367(6)
Noor Yusuf
Rajesh Govindan
Tareq Al-Ansari
63 Modelling and Parameter Fitting of the Dosage of Hydrogen Peroxide in a Photo-Fenton Process
373(6)
Kourosh Nasr Esfahani
Montserrat Perez-Moya
Moises Graells
64 Optimising the performance of the condensate stabilisation unit in LNG Processes
379(6)
Abdul Aziz Shaikh
Ahmed Ainouss
Tareq Al-Ansari
65 Data-driven modelling of full batch distillation cycles based on recurrent neuronal networks
385(6)
Gerardo Brand-Rihm
Erik Esche
Jens-Uwe Repke
66 Stackelberg Game Design and Operation of a Non-Cooperative Bi-Level Hi Supply Chain Under Cournot Equilibrium
391(6)
Jose M. Flores-Perez
Catherine Azzaro-Pantel
Antonin Ponsich
Alberto A. Aguilar Lasserre
67 Modelling of Heat-Driven Water Treatment Systems: Multi-Effect Distillation (MED) model in Modelica
397(6)
Miguel Castro Oliveira
Pedro Coelho
Muriel Iten
Henrique A. Matos
68 Continuous operation of a solar photobioreactor with linearizing control - A simulation study
403(6)
Joris Sebile-Meilleroux
Mariana Titica
Jeremy Pruvost
69 Dynamic Inherent Safety Analysis of a Distillation Column under Simultaneous Design and Control
409(6)
Denis Su-Feher
Efstratios N. Pistikopoulos
70 Modeling of Phosphates Slurry Pipelines Through Dynamic Non-Newtonian Fluid Model With Modelica
415(6)
Fatima Ez-Zahra El Hamra
Radouan Boukharfane
Saad Benjelloun
Ahmed Ja
Jean-Michel Ghidaglia
71 Tech no-Economic Analysis of the Conversion of Waste Plastics to Hydrogen Fuel
421(6)
Ali A. Al-Qadri
Usama Ahmed
72 Evaluating the flexible operation of vacuum-pressure swing adsorption for CO2 capture from modern gas turbines
427(6)
Mathew Dennis Wilkes
Solomon Brown
73 Exergoeconomic assessment of the optimized vapour-recompression assisted column for palm-based fatty acid fractionation
433(6)
Norul M. Sidek
Mohamad R. Othman
74 A Reduced Population Balance Model for Coupled Hydrodynamics and Mass Transfer in Shallow Bubble Column Reactors
439(6)
Menwer Attarakih
Ferdaous Al-Slaihat
Armin Fricke
Hans-Jorg Bart
75 Modeling of the crystallization of gypsum produced in the digestion tank of an industrial phosphoric acid manufacturing process
445(6)
Ilias Bouchkira
Abderrazak M. Latifi
Lhachmi Khamar
Saad Benjelloun
76 Development of a whole-body physiologically-based pharmacokinetic model for high-dose methotrexate
451(6)
Giuseppe Pesenti
Dario Massari
Marco Foppoli
Davide Manca
77 Analysis of an industrial adsorption process based on ammonia chemisorption: model validation
457(6)
Cristian Cardenas
Abderrazak M. Latifi
Cecile Vallieres
Stephanie Marsteau
78 CFD modeling and simulation of an ammonia adsorption process
463(6)
Flora Esposito
Cristian Cardenas
Abderrazak M. Latifi
Stephanie Marsteau
79 Polygeneration from sugarcane industries enhanced by functionalizing novel cultivars and excess thermal energy
469(6)
Shoma Fujii
Yuichiro Kanematsu
Yasunori Kikuchi
80 Economic optimization of a reactive distillation column with multiple reactive sections for silane production
475(6)
Alcantara-Maciel
Francisco D.
Victor E. Casillas-Cespedes
J. Armando Lopez-Garcia
Julian Cabrera-Ruiz
Cesar Ramirez Mdrquez
J. Rafael Alcantara-Avila
81 A multiscale model of proliferating and quiescent cell populations coupled with cell cycle dynamics
481(6)
Iqra Batool
Nairn Bajcinca
82 Multi-objective optimization of the food chain as a support for the development of agricultural sector
487(6)
Jan Drofenik
Klavdija Zirngast
Bojan Pahor
Zdravko Kravanja
Zorka Novak Pintaric
83 Optimal CO2 allocation for enhanced oil recovery operations within carbon utilisation networks in Qatar
493(6)
Razan Sawaly
Ikhlas Ghiat
Abdulkarim Mohamed
Ahmad Abushaikha
Tareq Al-Ansari
84 Optimal operation of an evaporator for the controlled production of titania nanoparticles
499(6)
Filippo Tamagnini
Sebastian Engell
85 A model-based approach for the prediction of banana rust thrips incidence from atmospheric variables
505(6)
Carlos A. Estrada
Jose Manrique-Silupu
William Ipanaque
Bogdan Dorneanu
Harvey Arellano-Garcia
86 Comparison between 3D numerical simulations and experimental results of a lab-scale liquid-solid fluidized bed
511(6)
Almir G. S. L. Ritta
Renaud Ansart
Olivier Simonin
87 Non-process elements in kraft bleach plants: adsorption equilibrium aiming at reducing water consumption
517(6)
Ana M. Sousa
Carolina T. Pinheiro
Jose Granjo
Licinio M. Gando-Ferreira
Lino O. Santos
Margarida M. J. Quina
88 Re-design and scheduling of dairy thermal treatment processes for continuous operation
523(6)
Wei-Fu Tseng
Sandro Macchietto
89 Xflow modelling for investigation of fluid structure interaction of artificial reef: application to burial effect
529(6)
Baptiste Oudon
Chanez Belaidi
Jessica Salaun
Arnaud Coutu
90 Metamodeling of chemical engineering unit operations using Kriging and prediction error estimation
535(6)
Thibault Delage
Sanaa Zannane
Thibaut Neveux
91 On the integration of process engineering with metabolomics for the production of muconic acid: the case for Saccharomyces Cerevisiae
541(6)
Stefanos Xenios
Daniel Weilandt
Hatzimanikatis Vasilis
Ljubisa Miskovic
Antonis Kokosis
92 Modelling and simulation of a residual lignocellulosic biomass pyrolysis pilot plant
547(6)
Nezly Martelo
Antonio Gagliano
Alberto Fichera
Rosaria Volpe
Mirari Antxustegi
Rodrigo Llano-Ponte
Maria Gonzalez Alriols
93 Techno-economic-environmental analysis of biodiesel production by magnetic nanoparticles CLEAs of eversa® transform
553(6)
E.S. Alves
L.P. Miranda
J.R. Guimaraes
P.W. Tardioli
R.C. Giordano
F.F. Furlan
94 Numerical Analysis of Impellers Hydrodynamics Performance in a Bioreactor CSTR with SPH
559(6)
R. Murrieta-Duenas
C.E. Alvarado-Rodriguez
J. Cortez-Gonzalez
R. Gutierrez-Guerra
95 On the use of embedded models and advanced analytics to model complex processes in the cement industry
565(6)
Alexandros Pyladarinos
Antonis Kokossis
Ioannis Marinos
Thanassis Gentimis
96 Aspen Plus® modeling approach of beechwood gasification in a fluidized bed reactor using biochar as bed material
571(6)
Leonela Martes Hernandez
Minda Loweski Feliz
Luis Reyes Alonzo
Lokmane Abdelouahed
Bechara Taouk
97 Mathematical modeling of the diffusion-limited (DLA) aggregation accompanied by particles swarming in reactors
577(6)
Leila Musabekova
Sabira Akhmetova
Assel Sailau
Arnold Brener
98 Verification of Neural Network Surrogates
583(6)
Joshua Haddad
Michael Bynum
Michael Eydenberg
Logan Blakely
Zachary Kilwein
Fani Boukouvala
Carl D. Laird
Jordan Jalving
99 Sustainable Analysis of Recent Acid Gas Treatment Schemes for LNG production
589(6)
Ahmed Al Nouss
Saad Al-Sobhi
VOLUME 2
T2: Product/Process Synthesis and Design
100 Promising future for biodiesel: Superstructure optimization from feed to fuel
595(6)
Thienan Huynh
Mattia Rossi
Maryam Raeisi
Meik B. Franke
Flavio Manenti
Edwin Zondervan
101 Model-based solvent selection for integrated synthesis, crystallisation and isolation processes
601(6)
Mohamad H. Muhieddine
Suela Jonuzaj
Shekhar K. Viswanath
Alan Armstrong
Amparo Galindo
Claire S. Adjiman
102 Computer-aided solvent design for suppressing HCN generation in amino acid activation
607(6)
Lingfeng Gui
Alan Armstrong
Amparo Galindo
Fareed Bhasha Sayyed
Stanley P. Kolis
Claire S. Adjiman
103 Improving sustainable CHOSYN's targets through process intensification
613(6)
Maricruz Juarez-Garcia
Gabriel Contreras-Zarazua
Juan Gabriel Segovia-Hernandez
Jose Maria Ponce-Ortega
104 A novel process design for automated quality analysis in an integrated biopharmaceutical platform
619(6)
Simon Tallvod
Mikael Yamanee-Nolin
Joaquin Gomis-Fons
Niklas Andersson
Bernt Nilsson
105 A multiscale approach towards the use of Urban waste within the energy transition strategy
625(6)
Sofia Gonzalez-Nunez
Lidia S. Guerras
Mariano Martin
106 Integration of thermo-chemical energy storage for flexible operation of decarbonized power plants
631(6)
Calin-Cristian Cormos
Letitia Petrescu
Ana-Maria Cormos
107 Superstructure optimization for sustainable design of an algae biorefinery
637(6)
Maryam Raeisi
Thienan Huynh
Meik B. Franke
Edwin Zondervan
108 Economic and Environmental Optimization and Feedstock Planning for the Renewable Jet Production Using an Intensified Process
643(6)
Raul Mauricio Rivas-Interian
Eduardo Sanchez-Ramirez
Juan Gabriel Segovia-Hernandez
Juan Jose Quiroz-Ramirez
109 Heat exchanger networks with different shell and tube configurations
649(6)
Jose A. Caballero
Mauro A.S.S. Ravagnani
Leandro Pavao
Caliane B.B. Costa
Juan Javaloyes-Anton
110 Considering Environmental and Social Impact in Optimization of a Supply Chain for Bio-Jet Fuel Production
655(6)
David Vallejo-Blancas
Juan Gabriel Segovia-Hernandez
Eduardo Sanchez-Ramirez
Gabriel Contreras-Zarazua
Juan Jose Quiroz-Ramirez
111 Superstructure Optimization of Dimethyl Ether Process
661(6)
Emrullah Erturk
Erdal Aydin
Sahin Sarrafi
Ozgun Deliismail
Aysel Zahidova
Hasan Sildir
112 A Comprehensive Evaluation on the COSMO-SAC-dsp model for Vapor-Liquid Equilibrium Predictions of Refrigerants
667(6)
Jiayuan Wang
Tongxin Sa
Lingyu Zhu
113 Design and Evaluation Strategies for a Novel Hybrid Trigeneration System
673(6)
Rachid Klaimi
Sabla Y. Alnouri
Mirko Stijepovic
114 Process synthesis for desalination using superstructure optimization on membrane technologies
679(6)
Alvaro Martinez-Triana
Mohamed Kanniche
Thibaut Neveux
Christophe Castel
Eric Favre
115 A comparison of process synthesis approaches for multistage separation processes by gas permeation
685(6)
Thibaut Neveux
Bernardetta Addis
Christophe Castel
Veronica Piccialli
Eric Favre
116 Bifurcation analysis of combined agglomeration and layering granulation in fluidized bed spray processes
691(6)
Eric Otto
Robert Diirr
Achim Kienle
117 Enhancement of energy saving of reverse osmosis system via incorporating a photovoltaic system
697(6)
Alanood A. Alsarayreh
Mudhar A. Al-Obaidi
Saad S. Alrwashdeh
Raj Patel
Iqbal M. Mujtaba
118 Design and simulation of methanol synthesis using heavy residues with carbon utilization
703(6)
Siddig S. Khalafalla
Hussain A. Alibrahim
Fayez Nasir Al-Rowaili
Umer Zahid
119 Integrated process synthesis and design of intensified/hybrid processes
709(6)
Shuang Xu
Selen Cremaschi
Mario R. Eden
Anjan K. Tula
120 Macroalgae-based integrated biorefinery for hydrocolloids, chemicals and advanced biofuels production
715(6)
Andres I. Casoni
Alejandro H. Pedrozo
Fernando D. Ramos
Vanina Estrada
M. Soledad Diaz
121 Design Space Determination of Mesenchymal Stem Cell Cultivation by Dynamic Modeling under Uncertainty
721(6)
Keita Hirono
Isuru A. Udugama
Yusuke Hayashi
Masahiro Kino-Oka
Hirokazu Sugiyama
122 Deterministic global optimization of multistage layer melt crystallization using surrogate models and reduced space formulations
727(6)
Christian Kunde
Ronald Mendez
Ac him Kienle
123 Model-Based Design Space for Protein A Chromatography Resin Selection
733(6)
Steven Sachio
Cleo Kontoravdi
Maria M. Papathanasiou
124 Sustainable Energy Systems Design with Heat Pump Technologies for Meeting Peak Heating Demand
739(6)
Xueyu Tian
Fengqi You
125 Isopropanol/ n -Butanol/ Ethanol separation from diluted fermentation broth by distillation. Process optimization using MILP techniques
745(6)
Eszter Toth
Gianluca Mancino
Ludovic Raynal
126 Automatic synthesis of hybrid processes using distillation and liquid-liquid extraction for the separation of azeotropic mixtures
751(6)
Thulasi Sasi
Mirko Skiborowski
127 A framework for optimal and flexible schemes design under uncertainty & sustainable aspects
757(6)
Jaime D. Ponce-Rocha
Martin Picon-Nunez
Ricardo Morales-Rodriguez
128 Optimization-based assessment framework for CO2 utilization to fuels strategies
763(6)
Thai Ngan Do
Chanhee You
Minseong Park
Changsu Kim
Seongju Lee
Jiyong Kim
129 A novel approach to continuous extraction of active ingredients from essential oils through combined chromatography
769(6)
Constantin Jurischka
Bogdan Dorneanu
Christian Stollberg
Harvey Arellano-Garcia
130 Digital design and optimization of an integrated reaction-extraction-crystallization-filtration continuous pharmaceutical process
775(6)
Timothy J. S. Campbell
Chris D. Rielly
Brahim Benyahia
131 Multi-objective optimization of natural gas liquefaction process simulation via kriging surrogate model
781(6)
Lucas F. Santos
Caliane B. B. Costa
Jose A. Caballero
Mauro A. S. S. Ravagnani
132 Integrated synthesis, modeling, and assessment of waste-to-resource alternatives
787(6)
Adrian Pacheco-Lopez
Ana Somoza-Tornos
Moises Graells
Antonio Espuna
133 MINLP model for work and heat exchange networks synthesis considering unclassified streams
793(6)
Lucas F. Santos
Caliane B. B. Costa
Jose A. Caballero
Mauro A. S. S. Ravagnani
134 Planetary Boundaries Assessment of Flue Gas Valorization into Ammonia and Methane
799(6)
Sebastiano C. D'Angelo
Julian Mache
Gonzalo Guillen Gosalbez
135 A techno-economic assessment of biochar production from date pits in the MENA region
805(6)
Aisha Al-Rumaihi
Mohammad Alherbawi
Prakash Parthasarathy
Hamish R. Mackey
Gordon McKay
Tareq Al-Ansari
136 Design of sustainable processes for CO2 capture
811(6)
Ana Gabriela Romero-Garcia
Nelly Ramirez-Corona
Eduardo Sanchez-Ramirez
Heriberto Alcocer-Garcia
Cataldo De Blasio
Juan Gabriel Segovia-Hernandez
137 Water network optimisation in chemical complexes: a refinery case study
817(6)
Francisco J. G. Patrocinio
Hugo M.D. Carabineiro
Henrique A. Matos
Nuno M.C. Oliveira
138 Optimal design of solar-aided hydrogen production process using molten salt with CO2 utilization for polypropylene carbonate production
823(6)
Wanrong Wang
Nan Zhang
Jie Li
139 Hierarchical Approach for Solvent Selection in Circular Economy
829(6)
Pranav Majgaonkar
Kai Kruber
Venkat Aryan
Ronny Hanich
Davide Pico
Mirko Skiborowski
140 A Framework to Facilitate Decision Making for Infrastructure Options Analysis of Distribution and Utilities Systems in Chemical Production Plants
835(6)
Marcello Di Martino
Iosif Pappas
Anh Iran
R. Cory Allen
Russell R. Husfeld
Sam Eleff
Scott G. Moffatt
Styliani Avraamidou
Burcu Beykal
Efstratios N. Pistikopoulos
141 An Optimization Model for Expansion Planning of Reliable Power Generation Systems
841(6)
Seolhee Cho
Ignacio E. Grossmann
142 Application of an ontology-based decision support system for the design of emulsion-based cosmetic products
847(6)
Juliana Serna
Jose L. Rivera-Gil
Alex Gabriel
Javier A. Arrieta-Escobar
Vincent Boly
Veronique Falk
Paulo C. Narvaez Rincon
143 Synthesis of extractive distillation structures for the purification of ethanol
853(6)
Tomoki Nakamura
J. Rafael Alcantara-Avila
Julian Cabrera-Ruiz
144 Optimal design for flexible operation with multiple fluctuating input parameters
859(6)
Bastion Bruns
Marcus Griinewald
Julia Riese
145 Design and Optimization of Membrane System for Gas Separation
865(6)
Shivom Sharma
Francois Marechal
146 Assessment of Carbon Capture Technologies for Waste-to-Energy System
871(6)
Shivom Sharma
Rafael Castro-Amoedo
Jaroslav Hemrle
Francois Marechal
147 Process Integration and Techno-Economic Assessment of a Green Biorefinery Demonstration Scale Platform for Leaf Protein Production
877(6)
Thalles A. Andrade
Morten Ambye-Jensen
148 The effect of alternative fuels on calcium looping
883(6)
Ana Amorim
Ismail Mohamed
Luiza Marques
Rui M. Filipe
Henrique A. Matos
149 Simultaneous Synthesis of Metabolic and Process Engineering for the Production of Muconic Acid
889(6)
Dimitriou Konstantinos
Kokossis Antonis
150 Renewable hydrogen supply chain for transport application in Corsica island
895(6)
T. Moustapha Mai
C. Cristofari
C. Azzaro-Pantel
E. Carrera
T3: Large Scale Design and Planning/Scheduling
151 Optimal configuration of a biodiesel production network using oil from black soldier fly larvae
901(6)
Dulce Maria Aguilar-Murguia
Sergio Ivan Martinez-Guido
Juan Fernando Garcia-Trejo
Salvador Hernandez
Claudia Gutierrez-Antonio
152 Optimization of Sink Locations in Carbon Integration Networks
907(6)
Sabla Y. Alnouri
Ilkan Sarigol
Dhabia Al-Mohannadi
Hadi Jaber
153 Towards Efficient Bioenergy Systems: Understanding the Role of Soil Sequestration, Supply Chain Design, and Carbon Capture
913(6)
Caleb H. Geissler
Eric G. O'Neill
Christos T. Maravelias
154 A Multi-Period Planning and Scheduling Strategy for Developing Hydrogen-Based Supply Chains
919(6)
R. Cory Allen
C. Doga Demirhan
Clara F. Heuberger-Austin
Efstratios N. Pistikopoulos
155 Holistic Capacity Management and Production Planning in the Pharmaceutical Supply Chain
925(6)
Simon B. Lindahl
Deenesh K. Babi
Krist V. Gernaey
Gtirkan Sin
156 Towards Resilience in Next-Generation Vaccines and Therapeutics Supply Chains
931(6)
Miriam Sarkis
Kyungjae Tak
Benoit Chachuat
Nilay Shah
Maria M. Papathanasiou
157 Network-Based Analysis of Electrified Chemical Processing with Renewable Energy Sources
937(6)
Ioannis Giannikopoulos
Alkiviadis Skouteris
David T. Allen
Michael Baldea
Mark A. Stadtherr
158 Ml IN LP framework for systems analysis of the chemical manufacturing industry using network models
943(6)
Alkiviadis Skouteris
Ioannis Giannikopoulos
David T. Allen
Michael Baldea
Mark A. Stadtherr
159 A Novel Approach for Vehicle Fleet Sizing and Allocation under Uncertain Demand
949(6)
Demian J. Presser
Vanina G. Cafaro
Diego C. Cafaro
160 Fresh vs frozen: assessing the impact of cryopreservation in personalised medicine
955(6)
Niki Triantafyllou
Andrea Bernardi
Matthew Lakelin
Nilay Shah
Maria M. Papathanasiou
161 A novel hybrid algorithm for scheduling multipurpose batch plants
961(6)
Dan Li
Dongda Zhang
Nan Zhang
Liping Zhang
Jie Li
162 Assessment of biomass supply chain design and planning using discrete-event simulation modeling
967(6)
Helena Paulo
Miguel Vieira
Bruno S. Goncalves
Tdnia Pinto-Varela
Ana P. Barbosa-Povoa
163 Design of a three-echelon supply chain under uncertainty in demand and CO; allowance prices
973(6)
F. L. Garcia Castro
R. Ruiz-Femenia
R. Salcedo-Diaz
J. A. Caballero
164 An industrial perspective on simulation versus optimisation decision-making capabilities
979(6)
Robert E. Franzoi
Mahmoud A. Ahmednooh
Brenno C. Menezes
165 Decomposition of Two-stage Stochastic Scheduling Problems via Similarity Index
985(6)
Daniel Monies
Jose L. Pitarch
Cesar de Prada
166 A New MILP Formulation for Scheduling of Crude Oil Operations
991(6)
Pelin Dologlu
Sena Kurban
Irem Marttin
Nazh Ataman
Gizem Kusoglu Kaya
Funda Lseri
Ozgur Kabak
Y. Ilker Topcu
167 Multiperiod optimization model for CO2 capture, utilization and storage, Colombian case study
997(6)
Alexandra Duarte
Javier D. Angarita
Juan P. Espinosa-Cdrdenas
Javier Lizcano
Rafael C. Garcia-Saravia
Ariel Uribe-Rodriguez
168 Towards improved scheduling: an analysis on time-steps, time-horizon, and rescheduling
1003(6)
Robert E. Franzoi
Brenno C. Menezes
169 Pharmaceutical Industry Supply Chains: Planning Vaccines' Distribution
1009(6)
Ines Duarte
Bruna Mota
Ana Paula Barbosa-Povoa
T4: On Line Model Based Applications and Control
170 Plantwide control strategy for a biodiesel production process from Jatropha curcas oil with variable composition
1015(6)
Osiris Martinez-Sanchez
Fernando Israel Gomez-Castro
Nelly Ramirez-Corona
171 Cascade fuzzy control of a tubular chemical reactor
1021(6)
Anna Vasickaninova
Monika Bakosova
Alajos Meszaros
172 Design and Implementation of an Optimal Control Framework for Post-combustion CO2 Capture Process
1027(6)
Gaurav Mirlekar
Lars O. Nord
173 Data Driven Process Monitoring, from Fault Detection and Diagnosis Points of View, in Industry 4.0 Context
1033(6)
Hamed Ardakani
Hadiseh Hemmati
Manuel Rodriguez Hernandez
174 Safe Chance Constrained Reinforcement Learning for Batch Process Optimization and Control
1039(6)
Max Mowbray
Panagiotis Petsagkourakis
Antonio Del Rio Chanona
Dongda Zhang
175 Support Vector Machine-based Design of Multi-model Inferential Sensors
1045(6)
Martin Mojto
Karol Lubusky
Miroslav Fikar
Radoslav Paulen
176 Model predictive control for greenhouse condition adjustment and crop production prediction
1051(6)
Guoqing Hu
Fengqi You
177 Study on the noise contents of different measurements in industrial process and their impact on process monitoring
1057(6)
Tingting Tao
Cheng Ji
Chengyu Han
Jingde Wang
Wei Sun
178 A Comparative Study on the Influence of Different Prediction Models on the Performance of Residual-based Monitoring Methods
1063(6)
Maying Ma
Yang Li
Fangyuan Ma
Jingde Wang
Wei Sun
179 Optimal operation of parallel mini-bio reactors in bioprocess development using Multi-Stage MPC
1069(6)
Niels Krausch
Jong Woo Kim
Sergio Lucia
Sebastian Grofi
Tilman Barz
Peter Neubauer
Mariano N. Cruz Bournazou
180 A platform for online system identification of dynamic ultrafiltration systems
1075(6)
Oscar A. Prado-Rubio
Victor H. Grisales Diaz
Jakob Kjobsted Huusom
181 Development of a Virtual Sensor for Real-Time Prediction of Granule Flow Properties
1081(6)
Rexonni B. Lagare
Mariana Araujo da Conceicao
Ariana Camille Acevedo Rosario
Katherine Leigh Young
Yan-Shu Huang
M. Ziyan Sheriff
Clairmont Clementson
Paul Mort
Zoltan Nagy
Gintaras V. Reklaitis
182 A Hierarchical Approach to Monitoring Control Performance and Plant-Model Mismatch
1087(6)
M. Ziyan Sheriff
Yan-Shu Huang
Sunidhi Bachawala
Marcial Gonzelez
Zoltan K. Nagy
Gintaras V. Reklaitis
183 Optimal Control Policies of a Crystallization Process Using Inverse Reinforcement Learning
1093(6)
Paul Danny Anandan
Chris D. Rielly
Brahim Benyahia
184 Dynamic Real Time Optimization with Closed-Loop Prediction for Nonlinear MPC Controlled Plants
1099(6)
Daniela Dering
Christopher L. E. Swartz
185 Dynamic Real-Time Optimization of a Solar Thermal Plant during Daytime
1105(6)
Alix Untrau
Sabine Sochard
Frederic Marias
Jean-Michel Reneaume
Galo A.C. Le Roux
Sylvain Serra
186 Online Bayesian Re-design of Parallel Experiments based on Asynchronous Posterior Sampling
1111(6)
Martin F. Luna
M. Nicolas Cruz B.
Ernesto C. Martinez
187 Dynamic optimisation and comparative analysis of fed-batch and perfusion bioreactor performance for monoclonal antibody (mAb) manufacturing
1117(6)
Wil Jones
Dimitrios I. Gerogiorgis
188 Control of an industrial packed extraction column for biodiesel washing
1123(6)
Manuel L. Pinho
Catarina G. Braz
Henrique A. Matos
Carla I.C. Pinheiro
Jose F. O. Granjo
189 Development of mechanistic reduced order models (ROMs) for glidant and lubricant effects in continuous manufacturing of pharmaceutical solid-dosage forms
1129(6)
Sunidhi Bachawala
Marcial Gonzalez
190 Health-aware control using hybrid models applied to a gas-lifted oil well network
1135(6)
Jose Matias
Salmon Y. Ghebredngl
Johannes Jaschke
191 Applying Ecological Interface Design for Modular Plants: Safety-Demonstrator Case Study
1141(6)
Nazanin Hamedi
Leon Urbas
Raimund Dachselt
192 Path-following for parametric MPCC: a flash tank case study
1147(6)
Caroline S. M. Nakama
Peter Maxwell
Johannes Jaschke
193 Feature engineering for neural network-based oscillation detection in process industries
1153(6)
Aswin Krishna M.
Ayush Kedawat
Abhishek Bansal
Resmi Suresh
194 Multi-parametric Model Predictive Control Strategies for Evaporation Processes in Pharmaceutical Industries
1159(6)
Ioana Nascu
Nikolaos A. Diangelakis
Efstratios N. Pistikopoulos
195 Process as a battery: Electricity price based optimal operation of zeolite crystallization in a COBR
1165(6)
Robin Semrau
Jiadi Yang
Sebastian Engell
196 Leveraging Deep Learning for Efficient Explicit MPC of High-Dimensional and Non-linear Chemical Processes
1171(6)
Ahmed Shokry
Mehdi Abou El Qassime
Eric Moulines
197 Incorporation of error propagation into an elemental balancing based soft-sensor for improved online monitoring of microbial fed-batch processes
1177(6)
Don Fabian Midler
Konrad Lagoda
Daniel Wibbing
Christoph Herwig
Julian Kager
198 In-silico Formulation of Iterative Learning Control for Chromatographic Purification of Biopharmaceuticals
1183(6)
Daniel Espinoza
Niklas Andersson
Bernt Nilsson
199 Application of Real-Time Optimization with Modifier Adaptation to the Reactive Extrusion of Hydro phobic-ally Modified Ethoxylated Urethanes
1189(6)
Maximilian Cegla
Sebastian Engell
VOLUME 3
T5: Concepts, Methods and Tools
200 Development of a virtual platform for the metaheuristic optimization of heat exchangers
1195(6)
Oscar D. Lara-Montano
Fernando I. Gomez-Castro
Claudia Gutierrez-Antonio
201 Combining optimization and life cycle assessment: Design of low-carbon multi-energy systems in the SecMOD framework
1201(6)
Christiane Reinert
Lars Schellhas
Julia Frohmann
Niklas Nolzen
Dominik Tillmanns
Nils Baumgdrtner
Sarah Deutz
Andre Bardow
202 Robust Design of Distributed Energy Systems Within Unbalanced Power Networks
1207(6)
Ishanki De Mel
Oleksiy V. Klymenko
Michael Short
203 SCR: A novel surrogate-based global optimization algorithm for constrained black-box problems
1213(6)
S. A. Zaryab
A. Manno
E. Martelli
204 Comparative Life Cycle Assessment of Demand-Side Management via Operational Optimization
1219(6)
Benedikt Nilges
Celia Burghardt
Kosan Roh
Christiane Reinert
Niklas von der Afien
205 A rigorous synthesis and optimal design methodology for chemical and biochemical processes
1225(6)
Jorge Chavez-Salas
Fernando Israel Gomez-Castro
Ricardo Morales-Rodriguez
206 Renewables-Based Multigeneration System for District Energy Supply
1231(6)
Houd Al-Obaidli
Rajesh Govindan
Tareq Al-Ansari
207 Topology-Based Construction of Business-Integrated Material Modelling Workflows
1237(6)
Heinz A. Preisig
Peter Klein
Natalia Konchakova
Thomas F. Hagelien
Jesper Friis
Martin T. Horsch
208 Investigation of optimal blending of livestock manures to produce biocrude via hydrothermal liquefaction
1243(6)
Mohammad Alherbawi
Prakash Parthasarathy
Gordon Mckay
Hamish R. Mackey
Tareq Al-Ansari
209 Systematic Pairing Selection for Economic-oriented Constraint Control
1249(6)
Risvan Dirza
Sigurd Skogestad
210 Quality assessment for dynamic, hybrid semi-parametric state observers
1255(6)
Isabell Viedt
Jonathan Mddler
Leon Urbas
211 ANN-assisted optimization-based design of energy-integrated distillation columns
1261(6)
Kai Fabian Kruber
Anna Miroschnitschenko
Mirko Skiborowski
212 Application of multiplicative homomorphic encryption in process industries
1267(6)
Zarina Chokparova
Leon Urbas
213 PPOPT - Multiparametric Solver for Explicit MPC
1273(6)
Dustin Kenefake
Efstratios N. Pistikopoulos
214 Improved Sequential Least Squares Programming-Driven Feasible Path Algorithm for Process Optimisation
1279(6)
Yingjie Ma
Nan Zhang
Jie Li
215 Parallel Simulated Annealing approach for optimal process plants instrumentation
1285(6)
Jose Hernandez
Gabriela Minetti
Carolina Salto
Mercedes Carnero
Mabel Sanchez
216 A sparse polynomial surrogate model for the shrinking core model in phosphate ore digestion
1291(6)
Sanae Elmisaoui
Saad Benjelloun
Abdellah Chkifa
Abderrazak M. Latifi
217 On the use of data engineering and machine learning in global optimization applications with cutting plane approximations
1297(6)
Vasiliki Deligianni
Asimina Marousi
Apostolos Chalkis
Antonis Kokossis
218 A systematic approach for the processing of experimental data from anaerobic syngas fermentations
1303(6)
Eduardo Almeida Benalcazar
Henk Noorman
Rubens Maciel Filho
John Posada
219 Process Systems Engineering prospects in Circular Economy implementation in industry
1309(6)
Konstantina G. Stylianopoulou
Emilia M. Kondili
John K. Kaldellis
220 Incremental financial analysis of black liquor upgraded gasification in integrated kraft pulp and ammonia production plants under uncertainty of feedstock costs and carbon taxes
1315(6)
Meire Ellen Gorete Ribeiro Domingos
Daniel Florez-Orrego
Moises Teles dos Santos
Silvio de Oliveira Junior
Francois Marechal
221 A Capex Opex Simultaneous Robust Optimizer: Process Simulation-based Generalized Framework for Reliable Economic Estimations
1321(6)
Kristiano Prifti
Andrea Galeazzi
Massimo Barbieri
Flavio Manenti
222 A soybean supply chain model to analyze the greenhouse gas emissions of the transport sector
1327(6)
Milagros Verrengia
Aldo Vecchietti
223 Ontology for Enhanced Industrial Process Control
1333(6)
Renata Samara Rodrigues de Sousa
Song Won Park
224 Complementing Natural Gas Driven Syngas with Optimum Blends of Gasified Biomass Waste
1339(6)
Ahmed Ainouss
Gordon Mckay
Tareq Al-Ansari
225 How tools and technologies can help drive sustainability
1345(6)
Julien de Beer
Mihaela Hahne
226 The use of game theory in the analysis of marine lubricant markets in ports
1351(6)
Dimitra Tsakona
Antonis Kokossis
T6: Digitalization and Artificial Intelligence
227 Application of Outlier Treatment Towards Improved Property Prediction Models
1357(6)
Adem R.N. Aouichaoui
Seyed Soheil Mansouri
Jens Abildskov
Giirkan Sin
228 Data-driven, Image-Based Flow Regime Classification for Stirred Aerated Tanks
1363(6)
Corinna Kroger
Valentin Khaydarov
Leon Urbas
229 Data-driven modeling for physical property prediction of polypropylene composites using artificial neural network and principal component analysis
1369(6)
Chonghyo J. Hyundo P
Seokyoung H
Jongkoo L
Hyungtae C
Il M
Junghwan K
230 Optimization of the Wastewater Treatment Plant Aeration Using Artificial Neural Networks Models
1375(6)
Norbert-Botond Mihdly
Vasile Mircea Cristea
231 The truncated Q statistic for Statistical Process Monitoring of High-Dimensional Systems
1381(6)
Marco S. Reis
Ricardo Rendall
Tiago J. Rato
Cristina Martins
Pedro Delgado
232 Development of a predictive emission measurement system using hybrid models with industrial data
1387(6)
Ataide S. Andrade Neto
Argimiro R. Secchi
Bruno D. O. Capron
Antonio Rocha
Luciana N. Loureiro
Patricia R. Ventura
233 On The Interpretability of Graph Neural Networks in QSPR modeling
1393(6)
Fan Fan
Adem R.N. Aouichaoui
Giirkan Sin
234 Predictive Maintenance in the Digital Era
1399(6)
Aaron S. Yeardley
Jude O. Ejeh
Louis Allen
Solomon F. Brown
Joan Cordiner
235 An evolutionary approach for techno-economic assessment
1405(6)
Martin C. De Meio Reggiani
Luciana B. Villar
Herndn P. Vigier
Nelida B. Brignole
236 Optimization of an artificial neural network structure for modelling carbon capture in spray columns
1411(6)
Ulderico Di Caprio
Emine Kayahan
Min Wu
Siegfried Mercelis
Peter Hellinckx
Tom Van Gerven
Steffen Waldherr
M. Enis Leblebici
237 Hierarchical Statistical Process Monitoring based on a Functional Decomposition of the Causal Network
1417(6)
Rodrigo Paredes
Tiago J. Rato
Lino O. Santos
Marco S. Reis
238 A Recurrent Neural Networks-Based Approach for Modeling and Control of a Crystallization Process
1423(6)
Fernando Arrais R. D. Lima
Gabriel F. M. de Miranda
Marcellus G. F. de Moraes
Bruno D. O. Capron
Mauricio B. de Souza Jr.
239 Lithium-air battery electrocatalyst identification using Machine Learning and SciBERT word embeddings
1429(6)
Arun Muthukkumaran
Arjun Ravichandran
Sai Shanbhag
Ramprasad Arjun
Raghunathan Rengaswamy
240 A digital twin-concept for smart process equipment assemblies supporting process validation in modular plants
1435(6)
Jonathan Madler
Julian Rahm
Isabell Viedt
Leon Urbas
241 Bayesian Optimization for techno-economic analysis of pressure swing adsorption processes
1441(6)
Leif Erik Andersson
Johannes Schilling
Luca Riboldi
Andre Bardow
Rahul Anantharaman
242 Online state of charge estimation of lithium-ion battery using surrogate model based on electrochemical model
1447(6)
Seunghyeon Oh
Kyojin Jang
Jiyong Kim
Il Moon
243 Machine-learning based prediction of infinite-dilution activity coefficients of ionic liquids using physicochemical properties
1453(6)
Seongju Lee
Changsu Kim
Thai Ngan Do
Jiyong Kim
244 The Impact of Reward Shaping in Reinforcement Learning for Agent-based Microgrid Control
1459(6)
Valentin Pere
Fabien Baillon
Mathieu Milhe
Jean-Louis Dirion
245 Knowledge mining from scientific literature for acute aquatic toxicity: classification for hybrid predictive modelling
1465(6)
Gulnara Shavalieva
Stavros Papadokonstantakis
Greg Peters
246 Machine Learning for the prediction of the thermochemical properties (enthalpy and entropy of formation) of a molecule from its molecular descriptors
1471(6)
Cindy Trinh
Dimitrios Meimaroglou
Silvia Lasala
Olivier Herbinet
247 A Novel Machine Learning-Based Optimization Approach for the Molecular Design of Solvents
1477(6)
Zihao Wang
Teng Zhou
Kai Sundmacher
248 A methodology for gray-box modeling of nonlinear ODE systems
1483(6)
Joschka Winz
Sebastian Engell
249 Optimal aeration of wastewater treatment plants based on recurrent neural networks and real plant data
1489(6)
Christian Hoffmann
Joris Weigert
Gerardo Brand Rihm
Erik Esche
Jens-Uwe Repke
250 Soft Sensor of Key Components in Recirculating Aquaculture Systems, using Feedforward Neural Networks
1495(6)
Allyne M. dos Santos
Espen Karlsen
Sigurd Skogestad
Kari J. K. Attramadal
251 Interpretability of neural networks predictions using Accumulated Local Effects as a model-agnostic method
1501(6)
Tina Danesh
Rachid Ouaret
Pascal Floquet
Stephane Negny
252 Hybrid AI Models in Chemical Engineering - A Purpose-driven Perspective
1507(6)
Arijit Chakraborty
Sven Serneels
Heiko Claussen
Venkat Venkatasubramanian
253 Determination of Adsorption Energies from DFT databases using Machine Learning techniques
1513(6)
Jose L. Arsuaga
Ana I. Torres
254 Probabilistic graphical models for the identification and analysis of reaction pathways in water treatment
1519(6)
Rachid Ouaret
Ali Badara Minta
Claire Albasi
Jean-Marc Choubert
Antonin Azais
255 Integrating autoencoder and heteroscedastic noise neural networks for industrial data analysis and soft-sensor design
1525(6)
Sam Kay
Harry Kay
Max Mowbray
Amanda Lane
Cesar Mendoza
Philip Martin
Dongda Zhang
256 Economic risk analysis of emergent green hydrogen facilities - A Monte Carlo approach
1531(6)
Bruno Gerard
Eduardo Carrera
Denis Lun
Lu Zhao
257 Machine Learning-Based Surrogate Models and Transfer Learning for Derivative Free Optimization of HTPEM Fuel Cells
1537(6)
Luis A. Briceno-Mena
Christopher G. Arges
Jose A. Romagnoli
258 A Methodology for The Optimal Surrogate Modelling of Digital Twins Using Machine Learning
1543(6)
Andrea Galeazzi
Kristiano Prifti
Francesco Gallo
Flavio Manenti
259 Bayesian Neural Network-Based Calibration for Urban Air Quality Sensors
1549(6)
Gustavo R. Taira
Adriano G. Leal
Alessandro S. Santos
Song W. Park
260 Hyperconic Machine Learning to Predict Microbial Growth
1555(6)
J. Cortez-Gonzalez
J.P. Serrano-Rubio
R. Murrieta-Duenas
I. Segovia-Dominguez
V. Lopez-Ramirez
T7: CAPE Applications Addressing Societal Challenges
261 Optimal Contract Selection for Contract Manufacturing Organisations in the Pharmaceutical Industry Under Uncertainty
1561(6)
Apostolos P. Elekidis
Michael C. Georgiadis
262 A Framework for Economic Optimization of Carbon Capture and Sequestration from Italian Industrial Sources Under Seismic Risk Constraints
1567(6)
Federico d'Amore
Gianmarco Marcato
Paolo Mocellin
Fabrizio Bezzo
263 Energy-water Scheduling Decisions for Agricultural Scenario Planning
1573(6)
Marcello Di Martino
Sarah Namany
Styliani Avraamidou
Tareq Al-Ansari
Patrick Linke
Efstratios N. Pistikopoulos
264 Optimizing the allocation of resources for the security of the water-energy-food nexus
1579(6)
Brenda Cansino-Loeza
Aurora del Carmen Munguia-Lopez
Jose Maria Ponce-Ortega
265 Application of CAPE Tools into Prospective Life Cycle Assessment: A Case Study in Recycling Systems Design of Lithium-Ion Battery
1585(6)
Yasunori Kikuchi
Aya Heiho
Yi Dou
Izuru Suwa
Chiharu Tokoro
266 A Fair-Sustainable Approach for the Optimization of an Integrated Fuel Production System
1591(6)
Aurora del Carmen Munguia-Lopez
Aurora de Fdtima Sdnchez-Bautista
Mahmoud M. El-Halwagi
Jose Maria Ponce-Ortega
267 The advancement of zero-emission natural gas power plants and their role in future energy supply
1597(6)
Aibo Zhang
Haoshui Yu
Emre Gencer
Adem A.R. Nielsen
Gurkan Sin
Songjie Shi
268 A Process Integration-Based Optimal Decarbonisation Policymaking Software Framework
1603(6)
Purusothmn Nair
S. Bhasker Nair
Michael Short
Dominic C. Y. Foo
Raymond R. Tan
269 Interplaying of industry 4.0 and circular economy in cyber-physical systems towards the mines of the future
1609(6)
Mohammed Yaqot
Brenno C. Menezes
Robert E. Franzoi
270 Environmental Impacts of Rice Husk-Derived Silica under Uncertainty: Is "Bio" better?
1615(6)
Ethan Errington
Miao Guo
Jerry Y. Y. Heng
271 Economic Analysis of Novel Pathways for Recovery of Lithium Battery Waste
1621(6)
Khalid Amao
Bogdan Dorneanu
Harvey Arellano-Garcia
272 Sensitivity Analysis and Risk Assessment for the In-Silico Design and Use of Optimized Cell Factories in a Xylitol Biorefinery
1627(6)
Nikolaus L. Vollmer
Krist V. Gernaey
Giirkan Sin
273 Optimal design and planning of supply chains for viral vectors and RNA vaccines
1633(6)
Dauda Ibrahim
Zoltan Kis
Kyungjae Tak
Maria Papathanasiou
Cleo Kontoravdi
Benoit Chachuat
Nilay Shah
274 Different approaches to epidemic modeling - The Covid-19 case study
1639(6)
Davide Manca
275 An integrated and sustainable Ethanol-Hydrogen-Ammonia-Urea plant
1645(6)
Artur S. Bispo
Leonardo O. S. Santana
Fernando L. P. Pessoa
Ana L. B. de Souza
Ewerton E. S. Calixto
276 A methodology based on social life cycle assessment for social hotspots identification
1651(6)
Andreia Santos
Madalena Veloso
Ana Carvalho
Ana Barbosa-Povoa
277 A game-theoretical approach for the analysis of waste treatment and circular economy networks
1657(6)
Antonis Kokossis
Evripidis Melampianakis
T8: Education in CAPE and Knowledge Transfer
278 Agile Process Systems Engineering (PSE) education -
1. What should be taught to achieve desired outcomes mastery by graduates?
1663(6)
Emilia M. Kondili
Ian T. Cameron
Gregoire Leonard
Daniel R. Lewin
Seyed Soheil Mansouri
Fernando G. Martins
Luis Ricardez-Sandoval
Hirokazu Sugiyama
Edwin Zondervan
279 You have nothing to lose: Worry-free flipping for PSE
1669(6)
Daniel R. Lewin
280 Agile Process Systems Engineering (PSE) education -
2. How to teach to achieve desired outcomes mastery by graduates
1675(6)
Daniel R. Lewin
Ian T. Cameron
Emilia M. Kondili
Gregoire Leonard
Seyed Soheil Mansouri
Fernando G. Martins
Luis Ricardez-Sandoval
Hirokazu Sugiyama
Edwin Zondervan
281 Decision-making framework for improved educational resilience under pandemic events
1681(6)
Robert E. Franzoi
Noof Al Qashouti
Brenno C. Menezes
282 Teaching courses heavily dependent on computational resources to STEM students during Pandemics
1687(6)
Nelson Chibeles-Martins
Lourdes B. Afonso
Author Index 1693
Ludovic Montastruc is Professor at the Laboratoire de Génie Chimique, Université de Toulouse, France. He published over 50 articles published in international scientific journals, over 20 book chapters, 5 conference papers, 3 review articles. Stephane Negny works in the Laboratoire de Genie Chimique at the Universite de Toulouse, Toulouse, France.