5th International Conference on Materials Science and Manufacturing Technology [Mīkstie vāki]

Preface
Chapter 1: Alloys and Steel
Effect of Austempering Parameters on Microstructure and Tensile/Impact
Behaviours of Micro-Alloyed TRIP-Assisted Steel
Development of a Neural Network Model and Taguchi-Based Optimization for Dry
Sliding Wear Performance of Al 6065 Alloy Reinforced with Nano SiC and
Graphene Nanoplatelets
Influence of Ca and Ce Additions on Microstructure and Microhardness of
Squeeze-Cast AZ91 Mg Alloy
Prediction of Surface Roughness of Monel k 500 Super Alloy by Using
Artificial Neural Network
Estimation of Planar and Normal Anisotropy Parameters of Al 8011 Sheets as
Cold Rolled and Cold Rolled with Annealed Condition
Neural Network Approach on Influence of Ceramics on Dry Sliding Wear in
Al-Cu-Zr Metal Matrix Composite
Chapter 2: Welding
Process Parameter Optimization of Aerospace-Grade Dissimilar Aluminium Alloy
7075 and 2014 by Friction Stir Welding
Correlation between Microstructure and Bending of FSW and TIG Welded Mg-Rich
Aluminium Alloy Joints
Hardness and Microstructure Analysis of Rotary Friction Welded Dissimilar
Joint of Cu and Ti-6Al-4V
Experimental Investigation of Friction Stir Welding on Al 2024-T3 and Al
7075-T6 Alloy
Chapter 3: Materials Processing
An FEM-ANN Based Analysis of Cutting Force and Cutting Tool Deflection to
Predict Tool Wear in Double Tool Turning Process
Evaluation of Machinability Performance MRR and SR of AA7050-7.5% B4C-T6
Composite through EDM
A Novel Approach of Heat Assisted Parallel Turning Process
Mathematical Model of Material Removal Rate during Milling of AISI D2 Tool
Steel Using Response Surface Methodology
Chapter 4: Coatings
Numerical Modeling of Critical Velocity and Deformation Behavior in Cold
Spray Using Lagrangian and Arbitrary Lagrangian Technique
Synthesis, Characterization of Chromium Oxide Powders and Coatings
Surface Hardening of CP Ti by Laser Hardening and Development of Ti/TiC
Surface Composite by Laser Sintering Technique for Wear Resistant Surface
Chapter 5: Thin Films
Studies on Lead Sulphide (PbS) Thin Film Prepared by Chemical Bath Deposition
Method
Effect of Annealing Temperature Variation on Al-Doped Nickel Oxide Thin-Film
Synthesized by Dip-Coating Technique
A Study on the Inclusion of Higher Dopant Proportion on ZrO2 Thin Film
Deposited by Spray Pyrolysis Method
An Embedded System Approach to Design and Development of an Automatic Spin
Coating Machine for Thin Film Applications
Effect of Lanthanum Doping on Properties of ZnS Thin Films for Water
Splitting
Optical Characterization of Semiconducting Thin Films Using UV-VIS-NIR
Spectroscopy: A Review
Chapter 6: Ceramics and Glasses
Physical and Luminescence Properties of Europium Ions Doped Barium Tellurite
Glass
Physical and Optical Properties of Lead-Tungsten-Tellurite Glasses
Impedance Spectroscopy Analysis of (1-x)Ba0.06(Na1/2Bi1/2)0.94TiO3-xNaTaO3
Ceramics
Fragility and Modified Gibbs-DiMarzio Relation Verification in Chalcogenide
Materials
Structure, Microstructure, and Dielectric Properties of
Bi0.5(Na0.78K0.22)0.5TiO3 Lead-Free Ceramic
Effect of Milling on Dielectric Properties of PZT
Dielectric and Mechanical Properties of PZT Incorporated PVDF Nanocomposites
Prepared by Solution Casting Method
Chapter 7: Functional Nanomaterials and Composites
AC Susceptibility and Superconducting Properties of Te-Substituted
TlSr2Ca(Cu2-xTex)O7
Evolution of Structure and Dynamic of Simulated CdTe Model According to the
Melting Process
Influence of Copper Doping on Structural and Opto-Electronic Properties of
Zinc Oxide Nanoparticles
Impact of Quantum Dots on Refractive Index of Nematic Liquid Crystal Polymer
System
The Effect of Hydrothermal Temperature and Sample Thickness on the Synthesis
of BaFe12O19@MnO2 Core-Shell Composites
Effect of Annealing on the Physical Properties of LaFeO3 Perovskite
Nanomaterial Prepared by Co-Precipitation Method for H2 Generation
Melting Process of the Two-Dimensional Material BN: Insights from Molecular
Dynamics Simulations
Investigation of Structural, Morphological and Luminescent Features of Eu3+
Activated Molybdate Based Phosphor for W-LED Applications
Chapter 8: Electrochemistry
Performance Analysis of the Protection Effect Cow Bone and Coconut Shell
Particulates on 1170 Aluminium Alloy in Dilute Electrolytes
Data Evaluation of the Protection Performance of Maize Husk Particulate
Reinforcements on 1170 Aluminium Alloy Corrosion in Dilute Electrolytes
A Disposable Electrochemical Sensor Based on Poly-5-Amino-1-Naphthol Modified
Electrode for the Quantification of Tyramine
Chapter 9: Biomaterials
Kinetics of Essential Oil Extraction of Kaffir Lime Peel Using Microwave
Assisted Hydrodistillation
The Fragility of Glassy Corn Starches
Effect of Plant Oil Derived Bio-Resin and Curing Temperature on Static and
Dynamic Mechanical Properties of Epoxy Network
Chapter 10: Research and Prevention of Materials Defects and Failures
Development of Manufacturing Process for High-Chromium Steel Large Welding
Roll
Fatigue Crack Propagation in 5754 Aluminum Alloy under Four-Point Bending
Physical Experiments and DEM Simulations for Erosion of Iron Target by Two
Impingements of Al2O3 Particle with Impingement Angles of Double 90ŗ
Wafer Defect Identification with Optimal Hyper-Parameter Tuning of Support
Vector Machine Using the Deep Feature of ResNet 101
Chapter 11: Waste Treatment
Synthesis of Iron-Carbon (Fe0-C) Nanocomposite and its Use for the Removal of
Rhodamine-B and Hexavalent Chromium from Aqueous Solutions
Development and Characterization of Green Composites from Agro Waste Aloe
Vera and Pineapple Leaf Fiber
Effect of Acids and Alkaline Pretreatment of Used Tea Waste Powder under
Microwave-Assisted Pretreatment
Fractographical Characterization of Jute Fibre Reinforced Paper Composite
Subjected to Drop Test
Characterization of Developed Agro-Based Adsorbents: A Study
Activated Carbon from Rice Husk: Optimization and Characterization
Stabilization of Clay Using Groundnut Shell Ash and Sugarcane Bagasse Ash
Mechanical Characterization of Pineapple Leaf Fiber Epoxy Composites with
Steel Wire Mesh
Chapter 12: Green Building Materials
Tangential Adhesive Strength of the Masonry with PET-Fibres Modified Mortar
Experimental Analysis of High-Strength Concrete Using Granite Aggregates
Mining Waste Utilization as a Sound Absorbing Material
Experimental Investigation on Strength Characteristics of Concrete by Partial
Replacement of Cement with Sodium Silicate
Assessment of Strength and Durability Parameters of Geopolymer Concrete
Blocks with Different Sand Replacement Levels
Performance of Strength and Modulii Characteristics of Ceramic Waste
Aggregate Concrete (CWAC)
Experimental Studies on Concrete Using the Partial Replacement of Cement by
Red Mud
Experimental Studies on Self-Compacting Alkali Activated Slag Concrete Mixes
Incorporating Reclaimed Asphalt Pavement as Fine Aggregate
An Innovative Study on Utilisation of Pareva Dust and Quartz Sand in
Concrete
Chapter 13: Civil Engineering
Prediction of Concrete Constituents Behavior Using Internet of Things (IoT)
An Approach for Grading of Soil Corrosiveness: A Case Study in Vicinity of
Ring Road-Kathmandu
Particular Strength Criteria for Microstructural Analysis of Masonry
Influence of Material Distribution on the Position of Neutral Axis of
Functionally Graded Cantilever Beam
Study on the Manufacturing of Composite Materials Made from Glass Fiber
Reinforced Polymer (GFRP) in Indonesia for Use as Lining in Open Channels