This special issue is fully dedicated to the recent achievements in the development of modern additive manufacturing and will be helpful to a wide range of specialists in the field of modern machinery.
Preface
Buckling Mechanism Simulation for Thin-Wall Components Made by Laser Powder
Bed Fusion
316L-Si Austenitic Stainless Steel Elaborated by Additive Manufacturing
Process: Porosity and Dislocation Density Estimation
Effect of Isothermal Annealing on Residual Stresses and Fatigue Properties of
LPBF 316L Steel
Fatigue Life and Impact Toughness of PBF-LB Manufactured Ti6Al4V and the
Effect of Heat Treatment
Overview: Additive/Subtractive Hybrid Manufacturing of Heat Resisting
Materials
The Influence of the Deposition Speed during Friction Screw Extrusion
Additive Manufacturing of AA6060
Production of a Ti6Al4V Automobiles Lower Control Arm with EBM
Design Strategies towards the Optimization of 3D Additive Manufactured
Lattice Structures
Processability and Solidification Microstructure of Al-10Si-4.5Mg Alloy
Fabricated by Laser Powder Bed Fusion
Process Parameter Prediction in Laser Powder Bed Fusion Using an Artificial
Neural Network
Advantages of Hybrid Neural Network Architectures to Enhance Prediction of
Tensile Properties in Laser Powder Bed Fusion
Low-Environmental Impact Surface Treatment on SLM-Produced AlSi10Mg Aluminium
Alloy
Functionally Graded Steels Obtained via Electron Beam Powder Bed Fusion
Towards Laser Metal Deposition of Modified PH 13-8Mo Powder
Triply Periodic Minimal Surfaces Manufactured by Electron Beam Powder Bed
Fusion: Approaches and Challenges
High Temperature Tensile Properties and Microstructure of Ni20Cr Alloy
Fabricated by Laser Powder Bed Fusion
Effect of Relative Weight on Compression Behaviour of 3D Printed Porous
Structure Made of Aluminium Alloy
Effective Strategies for Electron Beam Additive Manufacturing of Graded Metal
Interfaces between Stainless Steel and Vanadium
Themomechanical Response of an Additively Manufactured Hybrid Alloy by Means
of Powder Bed Fusion
Mechanical Behaviour of Maraging Steel Processed by Powder Bed Fusion via
Laser Beam (PBF-LB) in Different Build Orientations
High-Throughput Simulations of Phase Precipitation in Additively Manufactured
Al Alloy
Laser-Powder Bed Fusion Additive Manufacturing of NiCrBSi Self-Fluxing Nickel
Alloy, Material Health - Process Relationship
High Volume 3D Printer and Developed of High-Volume Extruders for Gelatin and
Liquids
Microstructural and Mechanical Characterization of Large Surfaces after Laser
Cladding by Wavering of Nickel Coating on Cast-Iron Molds Used in Glass
Industry
Laser-Based Directed Energy Deposition of Ceramic Nanoadditivated AA7075
Powder Alloys
Alloy Design for AM: A Ferritic Alloy for Applications in Corrosive Alkaline
Environment
