The presented special edition is devoted to recent research results in materials and additive technologies for various applied applications. This edition will be useful to specialists in materials science and additive technologies.
Preface
Chapter 1: Additive Manufacturing
Determination of Suitable Geometrical Ranges for the Manufacture of
Microfluidic Channels by Low-Cost Additive Manufacturing Techniques
Soluble vs Non-Soluble Support Materials for Bone 3D Printed Anatomical
Models: A Comparison on Production Time, Cost and Finish Quality
Development and Optimization of Processing Parameters of 316L Stainless Steel
and Inconel 718 by Wire Feed Direct Energy Deposition/Laser Beam (W-DED/LB)
Influence of PMMA 3D Printing Geometries on the Mechanical Response
Desiccant Dehumidification System Developed Using Additive Manufacturing and
Biodegradable Materials
High Compactness Heat Exchanger Manufactured Using Stereolithography
Technology and Photosensitive Resin
Effect of Printing Orientation on Product Quality and Overall Process
Efficiency: an Experimental Investigation
Design of Supports to Avoid Deformations in the Process of Alumina Printing
by Stereolithography
Evaluation of Metallic Parts Defects to Determine Repair Process Strategies
through Laser Metal Deposition
Material Extrusion of 3D Printed Ceramics Parts: Parameters, Structures and
Challenges
Optimization of Sandblasting to Improve the Surface Finish of 17-4PH Parts
Manufactured by SLM Using Different Laser Scanning Strategies
Recipe to Strengthen Continuous Fiber Reinforced 3D Printed Parts
Weighting of Criteria for the Application of the Analytical Hierarchy Process
(AHP) in the Selection of FDM Equipment through the Design of an Artefact
The Use of Cork and Silicone Rubber with Embedded Sensors in Sports' Smart
Protections: Studies on the Impact Absorption Performance
The Effect of Design and Fabrication Parameters on the Mechanical Properties
of 3D Re-Entrant Honeycomb Auxetic Structures
Generation and Characterization Metrology of Textures for Design of Urban
Furniture with Recycled Material - A Case of Study for Additive
Manufacturing
Laser Powder Bed Fusion (L-PBF) for Cellular Structures Formed by a
Heterogeneous Skeleton
Design of Pastes for Direct Ink Writing of Zirconia Parts with Medical
Applications
On the Processability of Aluminium Alloys by PBF-L/M Additive Manufacturing
Technology
Chapter 2: Sustainable Materials
Foam Glass Fabrication from End-of-Life Blended LCD Screen, Photovoltaic
Glass Cullet and Flat Glass
Tensile Property of Jute Fiber Sliver Reinforced Green Composite Material
under Loading Speed
Chapter 3: Building Materials
Developing Mixed-Mode (I/II) Fracture Resistance Curves for Asphalt Concrete
Mixtures at Low Temperatures
Analyses of the Structure Formation of Constructional Complex Mixtures
Developed on a Local Raw Basis and their Behaviour in a Chemically Aggressive
Environment
