Atjaunināt sīkdatņu piekrišanu

ADR applicable as from 1 January 2013: European agreement concerning the international carriage of dangerous goods by road [Mīkstie vāki]

  • Formāts: Paperback / softback, height: 300 mm, 2 vols [various pagings] figs (some col.), tables
  • Izdošanas datums: 06-Feb-2013
  • Izdevniecība: United Nations
  • ISBN-10: 9211391431
  • ISBN-13: 9789211391435
Citas grāmatas par šo tēmu:
  • Mīkstie vāki
  • Cena: 170,46 €
  • Grāmatu piegādes laiks ir 3-4 nedēļas, ja grāmata ir uz vietas izdevniecības noliktavā. Ja izdevējam nepieciešams publicēt jaunu tirāžu, grāmatas piegāde var aizkavēties.
  • Daudzums:
  • Ielikt grozā
  • Piegādes laiks - 4-6 nedēļas
  • Pievienot vēlmju sarakstam
ADR applicable as from 1 January 2013: European agreement concerning the international carriage of dangerous goods by roadPalielināt
  • Formāts: Paperback / softback, height: 300 mm, 2 vols [various pagings] figs (some col.), tables
  • Izdošanas datums: 06-Feb-2013
  • Izdevniecība: United Nations
  • ISBN-10: 9211391431
  • ISBN-13: 9789211391435
Citas grāmatas par šo tēmu:
Permanent link: https://www.kriso.lv/db/9789211391435.html
This authoritative Agreement is intended to increase the safety of international transport of dangerous goods by road. Regularly amended and updated since its entry into force, it contains the conditions under which dangerous goods may be carried internationally. This version has been prepared on the basis of amendments applicable as from 1 January 2013. It contains in particular new or revised provisions concerning chemicals under pressure, electric double layer capacitors, mercury contained in manufactured articles, dangerous goods used as a coolant or conditioner, salvage pressure receptacles, lithium batteries, dangerous goods packed in limited quantities, dangerous goods packed in minute quantities and packing instructions, as well as revised provisions for portable fire extinguishers and new restrictions in road tunnels for dangerous goods carried in limited quantities
European Agreement concerning the international carriage of dangerous goods by road xvii
Protocol of signature xxiii
Annex A General provisions and provisions concerning dangerous substances and articles
1(2)
Part 1 General provisions
3(102)
Chapter 1.1 Scope and applicability
5(10)
1.1.1 Structure
5(1)
1.1.2 Scope
5(1)
1.1.3 Exemptions
6(5)
1.1.4 Applicability of other regulations
11(2)
1.1.5 Application of standards
13(2)
Chapter 1.2 Definitions and units of measurement
15(24)
1.2.1 Definitions
15(21)
1.2.2 Units of measurement
36(3)
Chapter 1.3 Training of persons involved in the carriage of dangerous goods
39(2)
1.3.1 Scope and applicability
39(1)
1.3.2 Nature of the training
39(1)
1.3.3 Documentation
40(1)
Chapter 1.4 Safety obligations of the participants
41(6)
1.4.1 General safety measures
41(1)
1.4.2 Obligations of the main participants
41(2)
1.4.3 Obligations of the other participants
43(4)
Chapter 1.5 Derogations
47(2)
1.5.1 Temporary derogations
47(1)
1.5.2 (Reserved)
47(2)
Chapter 1.6 Transitional measures
49(12)
1.6.1 General
49(2)
1.6.2 Pressure receptacles and receptacles for Class 2
51(1)
1.6.3 Fixed tanks (tank-vehicles), demountable tanks and battery-vehicles
52(3)
1.6.4 Tank-containers, portable tanks and MEGCs
55(3)
1.6.5 Vehicles
58(1)
1.6.6 Class 7
59(2)
Chapter 1.7 General provisions concerning Class 7
61(4)
1.7.1 Scope and application
61(1)
1.7.2 Radiation protection programme
62(1)
1.7.3 Quality assurance
63(1)
1.7.4 Special arrangement
64(1)
1.7.5 Radioactive material possessing other dangerous properties
64(1)
1.7.6 Non-compliance
64(1)
Chapter 1.8 Checks and other support measures to ensure compliance with safety requirements
65(28)
1.8.1 Administrative controls of dangerous goods
65(1)
1.8.2 Mutual administrative support
65(1)
1.8.3 Safety adviser
66(6)
1.8.4 List of competent authorities and bodies designated by them
72(1)
1.8.5 Notifications of occurrences involving dangerous goods
72(7)
1.8.6 Administrative controls for application of the conformity assessments, periodic inspections, intermediate inspections and exceptional checks described in 1.8.7
79(2)
1.8.7 Procedures for conformity assessment and periodic inspection
81(7)
1.8.8 Procedures for conformity assessment of gas cartridges
88(5)
Chapter 1.9 Transport restrictions by the competent authorities
93(6)
1.9.5 Tunnel restrictions
93(6)
Chapter 1.10 Security provisions
99(6)
1.10.1 General provisions
99(1)
1.10.2 Security training
99(1)
1.10.3 Provisions for high consequence dangerous goods
100(5)
Part 2 Classification
105(184)
Chapter 2.1 General provisions
107(10)
2.1.1 Introduction
107(1)
2.1.2 Principles of classification
108(1)
2.1.3 Classification of substances, including solutions and mixtures (such as preparations and wastes), not mentioned by name
109(6)
2.1.4 Classification of samples
115(2)
Chapter 2.2 Class specific provisions
117(162)
2.2.1 Class 1: Explosive substances and articles
117(29)
2.2.2 Class 2: Gases
146(10)
2.2.3 Class 3: Flammable liquids
156(5)
2.2.41 Class 4.1: Flammable solids, self-reactive substances and solid desensitized explosives
161(11)
2.2.42 Class 4.2: Substances liable to spontaneous combustion
172(4)
2.2.43 Class 4.3: Substances which, in contact with water, emit flammable gases
176(3)
2.2.51 Class 5.1: Oxidizing substances
179(4)
2.2.52 Class 5.2: Organic peroxides
183(18)
2.2.61 Class 6.1: Toxic substances
201(12)
2.2.62 Class 6.2: Infectious substances
213(8)
2.2.7 Class 7: Radioactive material
221(32)
2.2.8 Class 8: Corrosive substances
253(6)
2.2.9 Class 9: Miscellaneous dangerous substances and articles
259(20)
Chapter 2.3 Test methods
279(10)
2.3.0 General
279(1)
2.3.1 Exudation test for blasting explosives of Type A
279(2)
2.3.2 Tests relating to nitrated cellulose mixtures of Class 4.1
281(1)
2.3.3 Tests relating to flammable liquids of Classes 3, 6.1 and 8
282(2)
2.3.4 Test for determining fluidity
284(3)
2.3.5 Classification of organometallic substances in Classes 4.2 and 4.3
287(2)
Chapter 3.1 General
291(4)
3.1.1 Introduction
291(1)
3.1.2 Proper shipping name
291(2)
3.1.3 Solutions or mixtures
293(2)
Chapter 3.2 Dangerous goods list
295
3.2.1 Table A: Dangerous Goods List
295(285)
3.2.2 Table B: Alphabetic index of substances and articles of ADR
580
Annex A General provisions and provisions concerning dangerous substances and articles
1(2)
Part 3 Dangerous goods list, special provisions and exemptions related to limited and excepted quantities
3(48)
Chapter 3.3 Special provisions applicable to certain articles or substances
5(38)
Chapter 3.4 Dangerous goods packed in limited quantities
43(4)
Chapter 3.5 Dangerous goods packed in excepted quantities
47(4)
3.5.1 Excepted quantities
47(1)
3.5.2 Packagings
48(1)
3.5.3 Tests for packages
48(1)
3.5.4 Marking of packages
49(1)
3.5.5 Maximum number of packages in any vehicle or container
50(1)
3.5.6 Documentation
50(1)
Part 4 Packing and tank provisions
51(200)
Chapter 4.1 Use of packagings, including intermediate bulk containers (IBCs) and large packagings
53(142)
4.1.1 General provisions for the packing of dangerous goods in packagings, including IBCs and large packagings
53(29)
4.1.2 Additional general provisions for the use of IBCs
82(1)
4.1.3 General provisions concerning packing instructions
83(3)
4.1.4 List of packing instructions
86(91)
4.1.5 Special packing provisions for goods of Class 1
177(1)
4.1.6 Special packing provisions for goods of Class 2 and goods of other classes assigned to packing instruction P200
178(3)
4.1.7 Special packing provisions for organic peroxides (Class 5.2) and self-reactive substances of Class 4.1
181(2)
4.1.8 Special packing provisions for infectious substances (Class 6.2)
183(1)
4.1.9 Special packing provisions for Class 7
184(4)
4.1.10 Special provisions for mixed packing
188(7)
Chapter 4.2 Use of portable tanks and UN multiple-element gas containers (MEGCs)
195(24)
4.2.1 General provisions for the use of portable tanks for the carriage of substances of Class 1 and Classes 3 to 9
185(15)
4.2.2 General provisions for the use of portable tanks for the carriage of non-refrigerated liquefied gases and chemicals under presure
200(1)
4.2.3 General provisions for the use of portable tanks for the carriage of refrigerated liquefied gases
201(2)
4.2.4 General provisions for the use of UN multiple-element gas containers (MEGCs)
203(1)
4.2.5 Portable tank instructions and special provisions
204(15)
Chapter 4.3 Use of fixed tanks (tank-vehicles), demountable tanks, tank-containers and tank swap bodies with shells made of metallic materials, and battery-vehicles and multiple-element gas containers (MEGCs)
219(24)
4.3.1 Scope
219(1)
4.3.2 Provisions applicable to all classes
219(4)
4.3.3 Special provisions applicable to Class 2
223(9)
4.3.4 Special provisions applicable to Classes 1 and 3 to 9
232(7)
4.3.5 Special provisions
239(4)
Chapter 4.4 Use of fibre-reinforced plastics (FRP) tanks, fixed-tanks (tank-vehicles), demountable tanks, tank containers and tank swap bodies
243(2)
4.4.1 General
243(1)
4.4.2 Operation
243(2)
Chapter 4.5 Use of vacuum operated waste tanks
245(2)
4.5.1 Use
245(1)
4.5.2 Operation
245(2)
Chapter 4.6 (Reserved)
247(2)
Chapter 4.7 Use of mobile explosives manufacturing units (MEMUs)
249(2)
4.7.1 Use
249(1)
4.7.2 Operation
249(2)
Part 5 Consignment procedures
251(58)
Chapter 5.1 General provisions
253(8)
5.1.1 Application and general provisions
253(1)
5.1.2 Use of overpacks
253(1)
5.1.3 Empty uncleaned packagings (including IBCs and large packagings), tanks, MEMUs, vehicles and containers for carriage in bulk
254(1)
5.1.4 Mixed packing
254(1)
5.1.5 General provisions for Class 7
254(7)
Chapter 5.2 Marking and labelling
261(12)
5.2.1 Marking of packages
261(4)
5.2.2 Labelling of packages
265(8)
Chapter 5.3 Placarding and marking of containers, MEGCs, MEMUs, tank-containers, portable tanks and vehicles
273(10)
5.3.1 Placarding
273(3)
5.3.2 Orange-coloured plate marking
276(6)
5.3.3 Mark for elevated temperature substances
282(1)
5.3.4 (Reserved)
282(1)
5.3.5 (Reserved)
282(1)
5.3.6 Environmentally hazardous substance mark
282(1)
Chapter 5.4 Documentation
283(20)
5.4.0 General
283(1)
5.4.1 Dangerous goods transport document and related information
283(10)
5.4.2 Large container or vehicle packing certificate
293(1)
5.4.3 Instructions in writing
294(5)
5.4.4 Retention of dangerous goods transport information
299(1)
5.4.5 Example of a multimodal dangerous goods form
299(4)
Chapter 5.5 Special provisions
303(6)
5.5.1 (Deleted)
303(1)
5.5.2 Special provisions applicable to fumigated cargo transport units (UN 3359)
303(2)
5.5.3 Special provisions applicable to packages and vehicles and containers containing substances presenting a risk of asphyxiation when used for cooling or conditioning purposes (such as dry ice (UN 1845) or nitrogen, refrigerated liquid (UN 1977) or argon, refrigerated liquid (UN 1951))
305(4)
Part 6 Requirements for the construction and testing of packagings, intermediate bulk containers (IBCs), large packagings, tanks and bulk containers
309(268)
Chapter 6.1 Requirements for the construction and testing of packagings
311(32)
6.1.1 General
311(1)
6.1.2 Code for designating types of packagings
312(2)
6.1.3 Marking
314(4)
6.1.4 Requirements for packagings
318(13)
6.1.5 Test requirements for packagings
331(9)
6.1.6 Standard liquids for verifying the chemical compatibility testing of polyethylene packagings, including IBCs, in accordance with 6.1.5.2.6 and 6.5.6.3.5, respectively
340(3)
Chapter 6.2 Requirements for the construction and testing of pressure receptacles, aerosol dispensers, small receptacles containing gas (gas cartridges) and fuel cell cartridges containing liquefied flammable gas
343(42)
6.2.1 General requirements
343(5)
6.2.2 Requirements for UN pressure receptacles
348(18)
6.2.3 General requirements for non-UN pressure receptacles
366(4)
6.2.4 Requirements for non-UN pressure receptacles designed, constructed and tested according to referenced standards
370(5)
6.2.5 Requirements for non-UN pressure receptacles not designed, constructed and tested according to referenced standards
375(5)
6.2.6 General requirements for aerosol dispensers, small receptacles containing gas (gas cartridges) and fuel cell cartridges containing liquefied flammable gas
380(5)
Chapter 6.3 Requirements for the construction and testing of packagings for Class 6.2 infectious substances of Category A
385(8)
6.3.1 General
385(1)
6.3.2 Requirements for packagings
385(1)
6.3.3 Code for designating types of packagings
385(1)
6.3.4 Marking
386(1)
6.3.5 Test requirements for packagings
387(6)
Chapter 6.4 Requirements for the construction, testing and approval of packages and material of Class 7
393(26)
6.4.1 (Reserved)
393(1)
6.4.2 General requirements
393(1)
6.4.3 (Reserved)
394(1)
6.4.4 Requirements for excepted packages
394(1)
6.4.5 Requirements for Industrial packages
394(1)
6.4.6 Requirements for packages containing uranium hexafluoride
395(1)
6.4.7 Requirements for Type A packages
396(2)
6.4.8 Requirements for Type B(U) packages
398(2)
6.4.9 Requirements for Type B(M) packages
400(1)
6.4.10 Requirements for Type C packages
400(1)
6.4.11 Requirements for packages containing fissile material
401(2)
6.4.12 Test procedures and demonstration of compliance
403(1)
6.4.13 Testing the integrity of the containment system and shielding and evaluating criticality safety
404(1)
6.4.14 Target for drop tests
404(1)
6.4.15 Tests for demonstrating ability to withstand normal conditions of carriage
404(2)
6.4.16 Additional tests for Type A packages designed for liquids and gases
406(1)
6.4.17 Tests for demonstrating ability to withstand accident conditions in carriage
406(1)
6.4.18 Enhanced water immersion test for Type B(U) and Type B(M) packages containing more than 105 A2 and Type C packages
407(1)
6.4.19 Water leakage test for packages containing fissile material
407(1)
6.4.20 Tests for Type C packages
407(1)
6.4.21 Inspections for packagings designed to contain 0.1 kg or more of uranium hexafluoride
408(1)
6.4.22 Approvals of package designs and materials
409(1)
6.4.23 Applications and approvals for radioactive material carriage
410(9)
Chapter 6.5 Requirements for the construction and testing of intermediate bulk containers (IBCs)
419(26)
6.5.1 General requirements
419(2)
6.5.2 Marking
421(3)
6.5.3 Construction requirements
424(1)
6.5.4 Testing, certification and inspection
425(2)
6.5.5 Specific requirements for IBCs
427(7)
6.5.6 Test requirements for IBCs
434(11)
Chapter 6.6 Requirements for the construction and testing of large packagings
445(10)
6.6.1 General
445(1)
6.6.2 Code for designating types of large packagings
445(1)
6.6.3 Marking
446(1)
6.6.4 Specific requirements for large packagings
447(3)
6.6.5 Test requirements for large packagings
450(5)
Chapter 6.7 Requirements for the design, construction, inspection and testing of portable tanks and UN multiple-element gas containers (MEGCs)
455(58)
6.7.1 Application and general requirements
455(1)
6.7.2 Requirements for the design, construction, inspection and testing of portable tanks intended for the carriage of substances of Class 1 and Classes 3 to 9
455(20)
6.7.3 Requirements for the design, construction, inspection and testing of portable tanks intended for the carriage of non-refrigerated liquefied gases
475(15)
6.7.4 Requirements for the design, construction, inspection and testing of portable tanks intended for the carriage of refrigerated liquefied gases
490(14)
6.7.5 Requirements for the design, construction, inspection and testing of UN multiple-element gas containers (MEGCs) intended for the carriage of non-refrigerated gases
504(9)
Chapter 6.8 Requirements for the construction, equipment, type approval, inspections and tests, and marking of fixed tanks (tank-vehicles), demountable tanks and tank-containers and tank swap bodies, with shells made of metallic materials, and battery-vehicles and multiple element gas containers (MEGCs)
513(44)
6.8.1 Scope
513(1)
6.8.2 Requirements applicable to all classes
513(21)
6.8.3 Special requirements applicable to Class 2
534(12)
6.8.4 Special provisions
546(6)
6.8.5 Requirements concerning the materials and construction of fixed welded tanks, demountable welded tanks, and welded shells of tank-containers for which a test pressure of not less than 1 MPa (10 bar) is required, and of fixed welded tanks, demountable welded tanks and welded shells of tank-containers intended for the carriage of refrigerated liquefied gases of Class 2
552(5)
Chapter 6.9 Requirements for the design, construction, equipment, type approval, testing and marking of fibre-reinforced plastics (FRP) fixed tanks (tank-vehicles), demountable tanks, tank-containers and tank swap bodies
557(8)
6.9.1 General
557(1)
6.9.2 Construction
557(5)
6.9.3 Items of equipment
562(1)
6.9.4 Type testing and approval
562(2)
6.9.5 Inspections
564(1)
6.9.6 Marking
564(1)
Chapter 6.10 Requirements for the construction, equipment, type approval, inspection and marking of vacuum-operated waste tanks
565(4)
6.10.1 General
565(1)
6.10.2 Construction
565(1)
6.10.3 Items of equipment
566(2)
6.10.4 Inspection
568(1)
Chapter 6.11 Requirements for the design, construction, inspection and testing of bulk containers
569(4)
6.11.1 Definitions
569(1)
6.11.2 Application and general requirements
569(1)
6.11.3 Requirements for the design, construction, inspection and testing of containers conforming to the CSC used as BK1 or BK2 bulk containers
569(1)
6.11.4 Requirements for the design, construction and approval of BK1 or BK2 bulk containers other than containers conforming to the CSC
570(3)
Chapter 6.12 Requirements for the construction, equipment, type approval, inspections and tests, and marking of tanks, bulk containers and special compartments for explosives of mobile explosives manufacturing units (MEMUs)
573(4)
6.12.1 Scope
573(1)
6.12.2 General provisions
573(1)
6.12.3 Tanks
573(2)
6.12.4 Items of equipment
575(1)
6.12.5 Special compartments for explosives
575(2)
Part 7 Provisions concerning the conditions of carriage, loading, unloading and handling
577(34)
Chapter 7.1 General provisions
579(2)
Chapter 7.2 Provisions concerning carriage in packages
581(4)
Chapter 7.3 Provisions concerning carriage in bulk
585(6)
7.3.1 General provisions
585(2)
7.3.2 Additional provisions for the carriage in bulk when the provisions of 7.3.1.1 (a) are applied
587(1)
7.3.3 Special provisions for the carriage in bulk when the provisions of 7.3.1.1 (b) are applied
588(3)
Chapter 7.4 Provisions concerning carriage in tanks
591(2)
Chapter 7.5 Provisions concerning loading, unloading and handling
593(18)
7.5.1 General provisions concerning loading, unloading and handling
593(1)
7.5.2 Mixed loading prohibition
593(3)
7.5.3 (Reserved)
596(1)
7.5.4 Precautions with respect to foodstuffs, other articles of consumption and animal feeds
596(1)
7.5.5 Limitation of the quantities carried
596(2)
7.5.6 (Reserved)
598(1)
7.5.7 Handling and stowage
598(1)
7.5.8 Cleaning after unloading
599(1)
7.5.9 Prohibition of smoking
599(1)
7.5.10 Precautions against electrostatic charges
599(1)
7.5.11 Additional provisions applicable to certain classes or specific goods
599(10)
Annex B Provisions concerning transport equipment and transport operations
609(2)
Part 8 Requirements for vehicle crews, equipment, operation and documentation
611(26)
Chapter 8.1 General requirements concerning transport units and equipment on board
613(4)
8.1.1 Transport units
613(1)
8.1.2 Documents to be carried on the transport unit
613(1)
8.1.3 Placarding and marking
613(2)
8.1.4 Fire-fighting equipment
615
8.1.5 Miscellaneous equipment and equipment for personal protection
614(3)
Chapter 8.2 Requirements concerning the training of the vehicle crew
617(8)
8.2.1 Scope and general requirements concerning the training of drivers
617(1)
8.2.2 Special requirements concerning the training of drivers
617(6)
8.2.3 Training of persons, other than the drivers holding a certificate in accordance with 8.2.1, involved in the carriage of dangerous goods by road
623(2)
Chapter 8.3 Miscellaneous requirements to be complied with by the vehicle crew
625(2)
8.3.1 Passengers
625(1)
8.3.2 Use of fire-fighting appliances
625(1)
8.3.3 Prohibition on opening packages
625(1)
8.3.4 Portable lighting apparatus
625(1)
8.3.5 Prohibition on smoking
625(1)
8.3.6 Running the engine during loading or unloading
625(1)
8.3.7 Use of the parking brakes and wheel chocks
625(1)
8.3.8 Use of cables
625(2)
Chapter 8.4 Requirements concerning the supervision of vehicles
627(2)
Chapter 8.5 Additional requirements relating to particular classes or substances
629(6)
Chapter 8.6 Road tunnel restrictions for the passage of vehicles carrying dangerous goods
635(2)
8.6.1 General provisions
635(1)
8.6.2 Road signs or signals governing the passage of vehicles carrying dangerous goods
635(1)
8.6.3 Tunnel restriction codes
635(1)
8.6.4 Restrictions for the passage of transport units carrying dangerous goods through tunnels
635(2)
Part 9 Requirements concerning the construction and approval of vehicles
637
Chapter 9.1 Scope, definitions and requirements for the approval of vehicles
639(6)
9.1.1 Scope and definitions
639(1)
9.1.2 Approval of EX/II, EX/III, FL, OX and AT vehicles and MEMUs
640(1)
9.1.3 Certificate of approval
641(4)
Chapter 9.2 Requirements concerning the construction of vehicles
645(10)
9.2.1 Compliance with the requirements of this
Chapter
645(3)
9.2.2 Electrical equipment
648(3)
9.2.3 Braking equipment
651(1)
9.2.4 Prevention of fire risks
651(2)
9.2.5 Speed limitation device
653(1)
9.2.6 Coupling devices of trailers
653(2)
Chapter 9.3 Additional requirements concerning complete or completed EX/II or EX/III vehicles intended for the carriage of explosive substances and articles (Class 1) in packages
655(2)
9.3.1 Materials to be used in the construction of vehicle bodies
655(1)
9.3.2 Combustion heaters
655(1)
9.3.3 EX/II vehicles
655(1)
9.3.4 EX/III vehicles
655(1)
9.3.5 Engine and load compartment
656(1)
9.3.6 External heat sources and load compartment
656(1)
9.3.7 Electrical equipment
656(1)
Chapter 9.4 Additional requirements concerning the construction of the bodies of complete or completed vehicles intended for the carriage of dangerous goods in packages (other than EX/II and EX/III vehicles)
657(2)
Chapter 9.5 Additional requirements concerning the construction of the bodies of complete or completed vehicles intended for the carriage of dangerous solids in bulk
659(2)
Chapter 9.6 Additional requirements concerning complete or completed vehicles intended for the carriage of temperature controlled substances
661(2)
Chapter 9.7 Additional requirements concerning fixed tanks (tank-vehicles), battery-vehicles and complete or completed vehicles used for the carriage of dangerous goods in demountable tanks with a capacity greater than 1 m3 or in tank-containers, portable tanks or MEGCs of a capacity greater than 3 m3 (FX/III, FL, OX and AT vehicles)
663(4)
9.7.1 General provisions
663(1)
9.7.2 Requirements concerning tanks
663(1)
9.7.3 Fastenings
663(1)
9.7.4 Earthing of FL vehicles
663(1)
9.7.5 Stability of tank-vehicles
664(1)
9.7.6 Rear protection of vehicles
664(1)
9.7.7 Combustion heaters
664(1)
9.7.8 Electrical equipment
665(1)
9.7.9 Additional safety requirements concerning EX/III vehicles
665(2)
Chapter 9.8 Additional requirements concerning complete and completed MEMUs
667
9.8.1 General provisions
667(1)
9.8.2 Requirements concerning tanks and bulk containers
667(1)
9.8.3 Earthing of MEMUs
667(1)
9.8.4 Stability of MEMUs
667(1)
9.8.5 Rear protection of MEMUs
667(1)
9.8.6 Combustion heaters
668(1)
9.8.7 Additional safety requirements
668(1)
9.8.8 Additional security requirements
668