This special edition is devoted to the latest research in materials science and technologies of materials processing. The published articles will be helpful to researchers and specialists in machinery and construction.
Preface
Chapter 1: Synthesis, Properties and Applications of Iron Oxide and Ferrites
Annealing Temperature Dependent of the Structural and Magnetic Properties in
Hematite Prepared by Sol-Gel Method
The Effect of Annealing Temperature on the Structural and Magnetic Properties
of Lanthanum Doped Cobalt Ferrite with the Bengawan Solo River Fine Sediment
as the Source of Fe3+
Microstructures, Magnetic Properties and Specific Absorption Rate of
Polymer-Modified Bismuth Ferrite Nanoparticles
The Ability of ZnFe2O4 Nanostructure as Electromagnetic Wave Absorber in
Frequency Range 2-18 GHz
The Ability of NiFe2O4 Samples to Reduce Electromagnetic Wave Pollution in
the Frequency Range of 2-18 Ghz
Increased Reflection Loss of SrFe(11.9-x) In0.1Snx/2Znx/2O19 (x = 0.0; 0.10;
0.35 and 0.50): A Microwave Absorber Induced by Reduced Coercivity
Photocatalytic Removal of Methylene Blue Dye Using CoZnFe2O4/SiO2 Magnetic
Nanoparticles
Exploration of the Antifungal Activity of Zn0.2Fe2.8O4/ Ag Ferrofluids with
Double Surfactants and Sunflower Seed Oil as Dispersion Medium
Fe3O4 Nanoparticles Prepared by Coprecipitations Method for Hyperthermia
Therapy
Chapter 2: Corrosion and Surface Treatment
Corrosion Behavior of Hastelloy C-276 in Hydrochloric and Sulfuric Acid
Formation of Protective and Hardening Coatings on Reinforcing Steels
The Orientation and High-Quality Effect of Deposit Layer to Surface Roughness
on FDM 3D Printed Part
Application of Psidium Guajava Leaf Extract as an Organic Inhibitor in Acid
Solution and Temperature Variation
Effect of Stand of Distance (SOD) of Abrasive Water Jet Cutting processes on
the Corrosion Properties of Material implant Stainless Steel 316L
Effect of HVOF Air Cap Nozzle Grooves on Cr3C2+ 20NiCr Coating
Characteristics
Risk-Based Integrity Management System of Oil Tanker Hull Structure due to
Corrosion
Cladding and Natural Aging of Aluminium Alloy 2024 for Aircraft Application
Chapter 3: Materials and Technologies in Construction
Synthesis of PAN Fibre-Supported Visible Light-Activated Carbon-Doped TiO2
for Toluene Degradation of Interior Wall Paints
The Mapping of Road Pavement Structure around the Seismically Active Regions
by Using Ground Penetrating Radar
Study on the Mechanical Performance of Soft Sandy Soil Solidified by Epoxy
Composites
Analysis of Coal Boiler Ash Content and Palm Shell Boiler Ash as a
Cementitious Material in ECC Mortar
Manufacturing and Characterization of Polymer Concrete with Aggregate from
Sand, Egg Shell and Sugarcane Waste with Epoxy Resin Binder as Sound
Absorber
Study on the Technology of Preparing Ceramsite from Coal Gangue
