This special topic edition is devoted to current issues in materials science and materials processing technologies. The publication will be helpful to materials science, machine building and construction specialists.
Preface
Chapter 1: Composites, Polymers and Ceramics
Analysis of the Upshot of Heat Treatment on Properties of Magnesium Hybrid
Composites
A Comparative Study of the Effect of Natural Fillers Embedded in Jute/Basalt
Hybrid Composite
Performance and Mechanical Characterization of Tufted and Untufted Woven Pine
Apple Leaf Fibre Reinforced with Poly Lactic Acid Green Composites
Effect of Electrical Poling on the Structural, Dielectric, and
Photoluminescence Properties of Eu3+ Substituted Eco-Friendly Ferroelectric
Material Na0.5Bi0.5TiO3
Impetus Yield of Acrylic Top Cover Pyramid Solar still due to Furthered
Thermal Conductivity of MnO2 and PANI-MnO2 Nanocomposite Materials
MWCNT Filled Banana-Rice Husk Epoxy Hybrid Natural Fiber Polymer Composites
Macrostructure and Fracture Behaviour of Rice Husk and MWCNT Dispersion
Strengthened Alkali Treated Banana Fiber Matrix Hybrid Composites
Experimental Study of Fiber Orientation on the Mechanical Properties of Glass
Fiber Reinforced Thermoplastic Composites
Processing and Mechanical Properties of (Hf-Ta-Zr-Nb-Ti)C
A Study of the Relationship between the Rate of Return Strain of
Polytetrafluoroethylene on Time, Mechanical Stress and Dose of Electron
Irradiation
Predicting the Climatic Resistance of the Material and the Durability of the
Structural Elements of the Composite Tower of the Power Line
Development of Digital Models of Physical and Mechanical Characteristics of
Biodegradable Polymers Using the Example of Compositions Based on Low Density
Polyethylene with Natural Rubber
Mathematical Modeling in Studying the Electrophysical Properties of
Syndiotactic 1,2-Polybutadiene
Research of Moisture Sorption by Laminated Composite Materials
Influence of Filler Concentration on the Mechanical Properties of a Polymer
Composite
Materials for the Needs of Agriculture Based on Biopolymers: A Comparative
Analysis of Physical and Mechanical Properties
Study of Thermal Aging of the PCM Using Acoustic Emission and Optical
Microscopy
Development of Heat-Resistant Composite Foam Material
Studies of Dielectric Characteristics of Polymer Films in a High-Frequency
Electromagnetic Field
Material Parameter Assessment for Noise-Absorbing Devices in Shoe Heels
Chapter 2: Microstructure, Properties and Processing of Structural Metals
Microstructure Analysis of Progressive Secondary AlSi7Mg0.6 Alloy with Higher
Fe Content Using Electron Metallography Techniques
Comparison of Microstructure and Properties of Nickel-Copper Alloy Prepared
by Casting and Laser Powder Bed Fusion Process
Formation of Sulphides in As-Cast GOES Thin Strips
Characterisation of a San Mai Steel Composite for the Manufacture of Knives
Numerical Simulation of the Welding Process during the Main Circulation Pump
Impeller Repair
A Study of Cut Surface after the Abrasive Water Jet Application on the MS1
Material Prepared by DMLS Method
The Influence of Progressive Cladding Technologies on Layers Quality
Chapter 3: Building Materials
Creep of Foam Concrete from the Position of the Hereditary Theory of Aging
Durability of Asphalt Concrete with Mineral Fillers Made of Non-Carbonate Raw
Materials
The Effect of the Dispersion Nickel Slag Additive on the Strength of Ceramic
Bricks
Mechanical Properties of Sand-Cement Mortar with Different Water/Cement Ratio
under Thermal Gradient Conditions
Aging of Structural Materials Modified with Polymer Additives in Cold Climate
Conditions
Analysis and Development of Innovative Concrete Compositions in the Republic
of Bashkortostan
Nonlinear Modeling of Heat Distribution during a Concreting Beam, Using a
Heating Electric Wire
Mineral Fillers Influence on Structure Formation and Properties of Asphalt
Concrete
Increasing Sedimentation Stability of Cement-Mineral Suspensions by Adding
the Hydroxyl-Containing Water-Soluble Polymers
Development of Acoustic and Thermal Insulation Materials from Pantyhose
Waste
Flattening of Bamboo Culm while Softening in Palm Oil and Subsequent
Mechanical Characterization
Potential Construction Applications of Sustainable 3D Printed Elements Made
from Plastic Waste
Thermal and Flammability Properties of Flame Retardant Phase Change Material
for Buildings Applications
Additive Manufacturing with Environmentally Sustainable Materials for Shell
Envelop System
Green Building Materials: Mechanical Performance and Environmental
Sustainability
