Atjaunināt sīkdatņu piekrišanu

Materials and Applications for Sensors and Transducers II [Mīkstie vāki]

  • Formāts: Paperback / softback, 550 pages, height x width x depth: 240x170x28 mm, weight: 1100 g, Illustrations, unspecified
  • Sērija : Key Engineering Materials
  • Izdošanas datums: 11-Apr-2013
  • Izdevniecība: Trans Tech Publications Ltd
  • ISBN-10: 3037856165
  • ISBN-13: 9783037856161
Citas grāmatas par šo tēmu:
  • Mīkstie vāki
  • Cena: 383,73 €
  • Grāmatu piegādes laiks ir 3-4 nedēļas, ja grāmata ir uz vietas izdevniecības noliktavā. Ja izdevējam nepieciešams publicēt jaunu tirāžu, grāmatas piegāde var aizkavēties.
  • Daudzums:
  • Ielikt grozā
  • Piegādes laiks - 4-6 nedēļas
  • Pievienot vēlmju sarakstam
  • Formāts: Paperback / softback, 550 pages, height x width x depth: 240x170x28 mm, weight: 1100 g, Illustrations, unspecified
  • Sērija : Key Engineering Materials
  • Izdošanas datums: 11-Apr-2013
  • Izdevniecība: Trans Tech Publications Ltd
  • ISBN-10: 3037856165
  • ISBN-13: 9783037856161
Citas grāmatas par šo tēmu:
Only one year after the first MAST conference, held in the Greek island city of Kos, the second conference drew about 240 oral and poster papers and about 150 non-presenting participants. Nearly half of the papers are presented here. Among them are discussions of characteristics of laser-generated visco-elastic Rayleigh waves, selective optical gas sensors using butterfly wing scales nanostructures, fabricating a monolithic integrated bimaterial resonant uncooled infrared sensor, different kinds of carbon-based material for resistive gas sensing, direct surface relief formation in polymer films, using a microwave sensor as an online indicator of neurological impairment during surgical procedures, improving amorphous selenium photodetector performance using an organic semiconductor, and evaluating the polarization state of integrated piezoelectric sensors and actuators using the thermal wave method. Annotation ©2013 Book News, Inc., Portland, OR (booknews.com)
Preface, Committees and Speakers
Outlook of Preisach Modeling and Magnetic Non Destructive Testing
Leaky Interface Waves Optical Detection at Solid-Solid Interface
An Improved Technique for the Exfoliation of Graphene Nanosheets and
Utilization of their Nanocomposites as Fuel Cell Electrodes
Electrochemical Features of Bilirubin Oxidase Immobilized on Different Carbon
Nanostructures
Color Changes upon Cooling of Lepidoptera Scales Containing Photonic
Nanoarchitectures
Characteristics of Laser-Generated Visco-Elastic Rayleigh Waves
Biomedical Sensing with Hydroxyapatite Ceramics in GHz Frequency Range
Low-Fluence Laser Induced Fragmentation and Desorption of
3,4,9,10-Perylenetetracarboxylic Dianhydride (PTCDA) Thin Film
Fabrication of Magnetic Tips for High-Resolution Magnetic Force Microscopy
Entangled Network of Carbon Nanotubes Embedded in Polyurethane and its Use
for Body Kinematics and Joint Flexion Sensing
A Pressure Sensing Conductive Polymer Composite with Carbon Nanotubes for
Biomechanical Applications
A Novel Handheld Electrochemical Analyzer System Interfaced to a Smartphone
Microfabrication (Hot-Embossing) of COC Microfluidic Devices: Effect of
Norbornene Content on Replication Fidelity and Surface Modification by
UV-Photografting
Flexible Approach to Sensors Arrays Nanopatterning for Real-Time Water
Contaminants Monitoring Platform
Self-Calibrating Optical Displacement Sensor
Sensing Nanoparticulate ZnO with Benzimidazole Derivative by Fluorescence
Induction of Nuclear Reactions through Piezoelectrics and other Means
Sensing Uric Acid with Bimetallic Nano Ag-Pt Particles
Microwave Synthesized CuO Nanoleaves as Nonenzymatic Glucose Sensor
Synthesis and Characterization of Silver-Poly(Methylmethacrylate)
Nanocomposite
Molecular Imprinted Poly(Ethyleneco-Vinyl Alcohol) Nanofibers Electrospun on
Gold Electrodes for Impedimetric Creatinine Sensing
Evaluation of the Potential In Vivo Genotoxicity of Tungsten (VI) Oxide
Nanopowder for Human Health
Dual MOSFET Hydrogen Sensors with Thermal Island Structure
Selective Optical Gas Sensors Using Butterfly Wing Scales Nanostructures
Choice of the Best Aspect Ratio in Magnets for Force Improvement
Realization of Measurement Station for Remote Environmental Monitoring
Selective Hydrogen Detection in a Highly Contaminated Background Using only a
Single Generic Metal Oxide Gas Sensor
Environmental UV-A Level Monitoring Using an Ag-TiO2 Schottky Diode
High Temperature Dielectric, Elastic and Piezoelectric Coefficients of Shear
Type Lithium Niobate Crystals
Gas Sensing Performance of Macroporous SnO2 Thin Film Prepared by Using
Carbonaceous Polysaccharide Microspheres as Pore-Forming Agent
Advantages of the Use of Metal Foams for Electromagnetic Shielding
Analyzing the Response of a Temperature Modulated Tin-Oxide Gas Sensor Using
Local Linear Neuro-Fuzzy Model for Gas Detection
Intelligent Metal Detector
Synthesis and Kinetic of Palladium Nanotube Using Polymer Compound
Photocatalytic Characteristics of Titania Thin Film Prepared by Micro Arc
Oxidation
H2S Sensing Properties of Added Copper Oxide in WO3
Electrical Characterization of MOS Structures with Silicon Nanocrystals
Suitable for X-Ray Detection
Thermally Stimulated Discharge Currents of Poly(acrylonitrile-co-acrylic
Acid)-Polypyrrole Composites
Hydrogen Detection with Semimetal Graphite-ZnO (InP,GaN) Schottky Diodes
Graphic LCD for Lightweight Electric Vehicles
Anisotropic Magnetoresistive Study in Bilayer NiFe-NiO for Sensor
Applications
A Generalized Method for Flat Plates Impact Detection and Location
Fabrication of Monolithic Integrated Bimaterial Resonant Uncooled IR Sensor
Investigation of Gas Sensing Materials SnO2/In2O3 Composite Nanofibers
Treated by Oxygen Plasma
Specic Conductance Characteristic of Force Sensing Resistor (FSR) with
Custom Made Single-Gap Conductive Contacts
Synthesis of Eu-Doped TiO2 Nanotubes Using Electrochemical Oxidation
Dodecane Sensing with Double Substituted LaCoO3 Nanowires Deposited by
Reactive Magnetron Sputtering
Electrical Properties and SEM Study of Foamed EBA/Carbon Black Composites
Biosafety Evaluation of Nanoparticles in View of Genotoxicity and
Carcinogenicity Studies: A Systematic Review
Building Functional Surfaces for Biosensors Development
Nanostructured Membranes for MEMS Energy Harvester
Mechanical, Electrical and Thermal Characterization of Commercially Available
LTCC Dielectric Tapes
Measurement of Putting Golf Balls Motion Using a Vision Sensor
Numerical Investigation of Propagation of Ultrasonic Waves in the Waveguides
with Mode Conversion
Capacitance Dependence of Interdigital Capacitor on Amount and Type of
Applied Liquid
Photochemically-Driven Methods for the In Situ and Site-Specific Fabrication
of Monolithic-Based Electrochromatographic Microsystems
A Novel Fiber-Optic Mass Flow Sensor
Various Designs of Meander Inductor and their Influence on LC Resonant
Displacement Sensor
Obtaining Highly Selective Responses from a Bulk Tin Oxide Gas Sensor
Measurement and Monitoring System for Level of Groundwater
Magneto-Optical Investigation of Thin-Film Magnetic Structures
Structural, Electrical and Magnetic Investigations of Conductive ZnO: Co Thin
Films Deposited by DC Reactive Magnetron Co-Sputtering
Nafion/Polypyrrole Blends for Non Enzymatic Detection of Hydrogen Peroxide
Effect of Parasitic Capacitance on GMI Magnetic Sensor Performance
An End-Type Fiber-Optic UV Sensor Covered with Mixture of Two UV Sensitive
Materials
Different Kinds of Carbon-Based Material for Resistive Gas Sensing
Effect of Neutron Irradiation on Indium-Containing III-V Semiconductor
Micromonocrystals
Characterization of Rutile N-Doped TiO2 Films Prepared by RF Magnetron
Sputtering
Direct Surface Relief Formation in Polymer Films
Discriminating among Acid-, Base-, and Salt-Based Electrolytes Using a Single
Microfluidic Channel
Sensing Mechanical Properties of Solid Materials with Bimorph
Piezotransducers
Structure of Hydrogen Gas Sensing TiO2 Thin Films Prepared by Sol-Gel Method
and their Comparison with Magnetron Sputtered Films
Surface Treatments to Enhance the Sensitivity of Plastic Optical Fiber Based
Accelerometers
Signal Processing Enhanced Fiber Vibration Sensors
Optimization and Modeling of Ink-Jet Printed Flexible Position Sensor
Differential Surface Plasmon Resonance Sensor for the Detection of Chemicals
and Biochemicals
Materials Bound by Non-Chemical Forces: External Fields and the Quantum
Vacuum
Wireless Electromagnetic Communication Systems between Bacteria in
Communities
Migration of Atoms and Molecules through Organic Films, Modified by Laser
Radiation
Comparative Studies of Dielectric Properties of Ca0.25Cu0.75TiO3 Ceramics
Produced by Mechanochemical Synthesis and in the Way of High-Temperature
Treatment
Effect of CTAB Concentration on Synthesis and Sensing Properties of
Perovskite Oxide via a Hydrothermal Process
Modeling of the Heat Loss in a Thermal Sensor for Water Made of NTC Thick
Film Segmented Thermistors
Hydrogen-Induced Amorphization of Intermetallics and QED Coherence
Localized Surface Plasmon Resonance Sensor Using Gold Nanoparticles for
Detection of Bisphenol A
Study of Local and Transient Buckling in Glass Fiber Reinforced Composite
Using Fiber Bragg Grating
Signal-Processing Interface for Inductive Displacement Sensor
Temperature Dependence of Electrical Conductivity of Multi-Walled Carbon
Nanotube Networks in a Polystyrene Composite
Structural Health Monitoring of Solid Rocket Motors' Propellant Using Polymer
Optical Fibers
Features of Optical Anisotropy of Terbium Iron Garnet
Using a Microwave Sensor as an Online Indicator of Neurological Impairment
during Surgical Procedures
Room Temperature Fluorescence Gas Sensor Based on Coated TiO2 Nanoparticles
Ultra Low Cost Rapid Prototyping of Diffraction Grating Remote Point Gas
Sensors
Coherent Ring Currents in Chiral Aromatic Molecules Induced by Linearly
Polarized UV Laser Pulses
Novel Approach for Lysozyme Detection Employing Block Copolymer Overlayers on
Plastic Optical Fibers
Control, Regulation and Command System of Hydronic Radiant Floors Heating by
Wireless and Energy Harvesting Sensors and Actuators
Developing a Transducer Based on Localized Surface Plasmon Resonance (LSPR)
of Gold Nanostructures for Nanobiosensor Applications
The Role of Open Source Leadership in Developing High Technology Companies
The Contribution of Dynamic Simulation Model of Depiction of Knowledge, in
the Leading Process of High Technology Companies
Plasma Treatment as a Way of Increasing the Selectivity of Carbon Nanotube
Networks for Organic Vapor Sensing Elements
Optimal Group Configurations of Fibre Materials Based on Inclusion Modelling
An Ultra Low-Power MR*1) Sensor for a Smart Water Meter or a Smart Gas Meter
Aerosol-Assisted CVD of SnO2 Thin Films for the Room-Temperature Detection of
Hydrogen Sulfide
Zero-Bias Operation and Beam Energy Dependence of Diamond Sensors
Microfluidic Gas Sensing with Living Microbial Cells Confined in a
Microaquarium
Fluidic Sensor Realized in the LTCC Technology
Improving the Performance of High Temperature Piezopolymers for
Magnetoelectric Applications
Microwave Technology: The Missing Piece of the Puzzle
The Effect of Oxygen Molecule Adsorption on Structural and Electrical
Properties of (8, 0) Carbon Nanotube: A Density Functional Study
Improving Amorphous Selenium Photodetector Performance Using an Organic
Semiconductor
Oxhydroelectric Effect in Bi-Distilled Water
Magnetite: Synthesis and Characterization
Investigation of Strain Sensing Properties of Polyester/Magnetite Composite
Materials
Low-Temperature Synthesis of Maghemite Nanoparticles
Calibration Procedure for Magnetization Loop Tracers
Characterization of Amorphous, Magnetic Fe-Si-B Ribbons
Metallurgical, Mechanical and Magnetic Properties of Electrical Steel Sheets
in TIG and PLASMA Welding
The Precise Measurements of Coercivity Fields of Nd-Fe Ferro-Magnets in
Pulsed High Magnetic Fields up to 20T
Parameters Consideration in Designing a Magnetorheological Damper
Optimization and Application of NTC Thick Film Segmented Thermistors
Stress Dependence of Switching Field during the Devitrification of
Finemet-Based Magnetic Microwires
MIP-Based Impedimetric Sensors
Evaluation of the Polarization State of Integrated Piezoelectric Sensors and
Actuators Using the Thermal Wave Method
Frequency Dependence of Complex Permeability of Polycrystalline Ferrites
Based on the Realities of Microstructure
Full Factorial Design to Study Material Parameters of Magnetorheological
Fluid
Piezoelectric Immunosensors for Toxins' Detection in Foodstuffs