Peer-reviewed papers from a July 2011 conference are collected in this three-volume set. The papers reflect current research in areas such as composites, micro/nano materials, iron and steel, metal alloy materials, high-performance elastomers and polymers, biomaterials, and optical, electronic, and magnetic materials. Other papers look at advances in materials physics and materials chemistry in general. Some specific chapter subjects include a numerical approach for the simulation of cementitious materials, a microemulsion system for transdermal delivery of matrine, and residual stresses in locally long fiber reinforces aluminum parts. Other areas examined are tribological properties of a triazine derivative in rapeseed oil, a spontaneous oxidation route to Se/Te alloy nanorods at room temperature, effects of conventional cold rolling on wear-resisting performance of high manganese steel, and alumina gel casting using a glutin-urea system. Annotation ©2011 Book News, Inc., Portland, OR (booknews.com)
Preface and Committees
Chapter 1: Composites
Analysis of Numerical Simulation for Seismic Performance of MMCs
A Numerical Approach for the Simulation of Cementitious Materials
Analysis of Stress on Interface Crack of Orthotropic and Isotropic
Bi-Materials
Fabrication of Ti66V13Cu8Ni6.8Al6.2 Bulk Composites with High Strength by
Spark Plasma Sintering and Crystallization of Amorphous Phase
Hydration Kinetics Of Carbonized Spinel Carbon Brick With Al
In Situ Fabrication of Particles Reinforced Al-Si-Al2O3
Composites by Hot Isostatic Pressing
Improving Staircase Effect in the Process of Ceramic Laser Gelling
Gas Barrier Properties of SiOX Films Deposited by RF Magnetron Co-Sputtering
Experimental Study on Effects of Laminated Structure on Acoustic Insulation
Property of Composites
A Novel Approach to Disperse CuO onto the Zeolites Mordenite and Beta
Dry Sliding Wear Resistance of NiMo/Mo2Ni3Si Intermetallic Composites
Fabrication, Microstructure and Properties of Nitrides Bonded Alumina
Castables by In Situ Nitridation Reaction
Research on the Performance of SiAlON-Graphite-SiC Composites
Fabrication of Barrel-Type Pre-Formed Shape of Al2O3f+Cf/ZL109 Composite
Material
-Cyclodextrin-Cross-Linked Polymer Microcolumn Dynamic
Preconcentration/analysis for Trace Cadium
Investigation on Cleansing the if Molten Steel with the Dispersed In Situ
Phase Induced by the Composite Ball Explosive Reaction in RH Ladles
Effect of Electromagnetic Stirring on Microstructure of In Situ Synthesized
(Al2O3+Al3Zr)P/Al Composites
Effect of La on Solute Segregation during Solidification of Al2O3SiO2f/A356
Alloy Composite
Effect of Fumed Titanium Oxide on Thermal Stability of Nano-Silica Thermal
Insulating Composites
Pressureless Infiltration Fabricated Steel Matrix Composites Reinforced with
WC by the Local Electromagnetism Induction Heating
A Study on the Influence of Different Anionic Surfactants on the AFM Scanning
and Imaging of SWCNTs
Sepiolite/CuFe2O4 Composite: a Magnetic Absorbent for Removal of Contaminants
from Water
Enhanced Room Temperature Magnetoresistance in La0.7Ca0.2Sr0.1MnO3/BN
Composites
Prepartion of Organophilic Bentonite / Paraffin Composite Phase Change Energy
Storage Material with Melting Intercalation Method
Impact Compressive Character of Balanced Angle-Ply Carbon/Epoxy Composites
The Research for Bitmap and Vector Conversion Methods
The Study of Welding Power-Arc System Stability Based on DFCD
Evaluation of Sulfide Capacity Models and Application in Steelmaking Slags
Research on Tunnel Effect of Carbon Black-Filled Cement-Based Composites
Effect of ZnO-Loading Method on Methyl Orange Removal Capacities of Expanded
Graphite/ZnO Composites
Relation between Impact Properties and Interfacial Strength of UHMWPE/VE
Composites
Joining Aluminium to Titanium by MIG Welding-Brazing Process
Removal of Methyl Orange from Aqueous Solution by Using Exfoliated
Graphite/ZnO Composites
Effect of ZnO-Loading Method on Adsorption and Decomposition Capacities of
Expanded Graphite/ZnO Composites for Crude Oil
Preparation and Characterization of A Metal-Based Al/Al2O3 Gradient Coating
Investigation on the Alkali-Resistance Properties of Basalt Fiber Reinforced
Plastics Bars in Concrete
Flame Retardant ABS with a Novel Polyphosphate Derived from Biomass
Effect of Preparation Technique on Methyl Orange Sorption Behavior of
Exfoliated Graphite
QSPR Study on Electric Spark Sensitivity of Nitro Arenes
Preparation and Characterization of Al2TiO5- Si3N4 Composites by Reaction
Sintering Process
Mechanical and Tribological Properties of PTW/PTFE/PPS/PES Composites
Effect of Silicon on Molten Iron Corrosion Resistance of Corundum-Silicon
Nitride Composites
Preparation and Study of Polyethylene Glycol (PEG)/Titanium Dioxide (TiO2)
Phase Change Materials
Investigation of Microemulsion System for Transdermal Delivery of Matrine
Investigation of Phase Composition and Microstructure of the FeAl/Al2O3
Composites Fabricated by Mechanical Alloying and Plasma Active Sintering
Process
Microstructure of Directionally Solidified Ni-Ni3Si Hypoeutectic In Situ
Composite
Synthesis and Characterization of Tri-N-Octylamine-Intercalated -Zirconium
Phosphate
Study on Removal Arsenic from Iron Ore with Arsenic in Sintering Process
Effect of Molar Ratio of MgO/Al2O3 on the Performance of MgO-Al2O3-Fe2O3
Composite
Preparation and Isothermal Crystallization Behavior of Poly(lactic
acid)/Graphene Nanocomposites
Properties of PANI-PVA Composite Film
Micro-Structure and Rheological Properties of HIPS Matrix Composites Filled
with Magnesium Hydroxide Whisker Modified with Styrene via In Situ
Polymerization
Neural Network Based On the Improved Genetic Algorithm to Optimize Component
Separation Conditions of Small Peptide
Microstructure and Abrasive Wear Characteristics of In Situ WC Bundles
Reinforced Iron Matrix Composites
Infiltration Casting and In Situ Fabrication of NbC Particulates Reinforced
Iron Matrix Composites
Infiltration Casting and In Situ Fabrication of (Fe,Cr)7C3 Particulates
Bundle Reinforced Iron Matrix Composites
The Mechanical Properties of Jute Fiber Mats Reinforced Vinyl Ester Resin
Composites
Residual Stresses in Locally Long Fiber Reinforced Aluminum Parts
Tribological Property of a Triazine Derivative in Rapeseed Oil
Implementation of Crack Problem of Functionally Graded Materials with
ABAQUSTM
Research on Mercury Emissions Regularity and Adsorbing Mercury by Activated
Carbon in Coal-fired Power Plants
Interface Bonding Properties of 25Cr5MoA/Q235 Bimetallic Compound Shaft
Piezoresistive Properties of Cement Mortar with Carbon Nanotube
Effect of Mo2C Content on Microstructure and Composition of Ti(C,N)-Based
Cermets Mixing in Water
Comparison of Fatty Acid and Antioxidant Property of Pawpaw Coconut Oil and
Virgin Coconut Oil
Research on Ceramic Matrix Composites (CMC) for Aerospace Aplications
The Study of Post-Fire Load Bearing Capacity of Steel Column under Axial
Compression Exposure to one-Side Fire
Fabrication of Pressureless Sintered -Sialon-ZrO2 Composites
Static and Dynamic Responses of a Composite Engine Mounting Structure
Secondary Energy Analysis of Typical Steel Manufacturing Process
The Mechanical Properties of Epoxy/ Fiber Composites Influenced by Ageing
Effects on Coatings
Effects of Nanoparticles TiN on the Crystallization Behavior of PET
Nanocomposites
Carbon Nanotubes Containing Metal Nanoparticles-Graft-Hyperbranched
Polyglycerols Nanocomposites
Study of Thermal Properties of Curing of DGEBA Epoxy Resin with
Hexakis-(4-Aminophenoxy)-Cyclotriphosphazene
Thermodynamical Analysis of the Reaction between AlN and ZrO2 and
Experimental Substantiation
Research on Processing Technology of Polyester Fabric Reinforced
Polypropylene Thermoplastic Laminated Composites
New Method of Preparation and Property Study of the Montmorillonite Modified
with CTAB
Preparation and Damping property Study of Styrene-Acrylic IPN/Mt
Nano-composite Material
Microstructure and Properties of Nano Al2O3-Cu/Cr Composite
Monte Carlo Study on Thermal Transport in Si/Ge Superlattice Basing on Phonon
Dispersion Discrepancies
Certification for Effect of Environment on Composite Properties
Processibility and Mechanical Properties of Mullite-Filled Styrene Butadiene
Rubber Composites
Theory Calculation of Diffussion Coefficient Based on Molten Slag Structure
The Design for the Main Reaction System of a New Welding Material
Ultrafiltration of Produced Water from Polymer Flooding with Hydrophilized
Polyvinylidene Fluoride Membrane for Reuse
Dispersion and Preparation of Polyurethane/Carbon Nanotubes Composites
Dynamic Mechanical Property of Quasi Constrained Layer Structural
Piezoelectric Ceramic/Carbon Black/Epoxy Resin Composites
Mathematical Model for Evaluating Cylindricity Errors by Minimum Zone Method
Method on Accelerated Rupture Life Evaluation for Composite Material Based on
Type-II Censored Data
Optimal Design of Sisal Fibre Reinforced Resin Matrix Composite
Controllable Fabrication of -MnO2 Microspheres and -MnO2 Nanorods
Application of Coal Mine Comprehensive Monitoring System Based on OPC
Preparation and Characterization of Poly(Vinyl Alcohol)(PVA)/Hydroxyapatite
(HA) Nanofibrous Scaffolds
Preparation and Characterization of Graphene Nanoplatelet/Magnetite Compound
Powders
Research on the Application of Cement Stabilized Cool Regeneration of the
Highway Maintenance
Experimental Study on Continuous Annealing of High-Tensile Cold Rolled
Bake-Hardening Steel
Study on Space Copper-Based Powder Metallurgy Friction Material and its
Tribological Properties
Influence Factors for the Preparation of Kaolinite-Formamide Intercalation
Analysis of Stresses for Cross-Ply Laminates with a Matrix Crack under
Bending
Effect of Three Catalysts on Synthesis of Silicon Carbide Whiskers with
Silica Fume
Effects of Gd on Microstructure and Mechanical Properties of AZ61 Magnesium
Alloy
Analysis of Break Impact Load on Composite Insulators Used as Tension String
Effect of PA6 Addition on the Mechanical Properties of PMMA Blends
The Effect of TiO2 on the Mechanical and Tribological Properties of PA66
Nanocomposites
Program for the Analysis of Wind-Induced Vibration of Steel Roof Structures
Research on Crack-Resistance Property of Asphalt Mixture as Road
Stress-Absorbing Interlayer
The Distribution of Microstructure and Mechanical Properties of Carbon-Carbon
Composites
Spark Plasma Sintering of Mixed and Milled WC-Co Micro-/Nano-Powders
Deformation Behavior of a Multiphase Fine-Grained Mo-Si-B Alloy
The Effect of Injection Molding Process Parameters on the Buckling Properties
of PBT/Short Glass Fiber Composites
Study on the Mechanical Properties and Creep Behaviour of Carbon Fiber
Nano-Composites
The Grain Rotation Behavior of CuY0.8 Nano Alloys in the Process of Plastic
Deformation
Electrochemical Properties of Polyaniline/-Zirconium Phosphate Nanocomposite
and the Effect of pH Values
TiC Particulates Prepared by Self-Propagating High Temperature Synthesis
Electrochemical Properties of Zinc-LaCoO3 Electrode for Alkaline Zinc-Based
Battery
The Properties of Coarse Grain Heat Affect Zone of Pipeline Steels with
Excellent Deformability under Different Welding Heat Input
Isotropic Pyrolytic Carbon Fabricated by Developing Self-Heating Plates
Chemical Vapor Deposition
Preparation and Characterization of N Doped TiO2/ Sepiolite Composite
Materials
Synthesis of [ 6,7]-Dihydro-[ 1,4]-Dioxino-[ 2,3-f][ 2,1,3]-Benzothiadiazole: A
Novel Building Block for Electron-Poor Conjugated Polymers"
Experimental Investigation of Impacted and Non-Impacted Composite Laminates
under Compressive Loading
Friction Properties of Carbon Nanotubes Reinforced Nitrile Composites under
Water Lubricated Condition
Microwave Modified Timber: Collaborative Research Integrating Product Design
for New Materials Development
The Research of Spraying SiC/Cu Electronic Packaging Composites
Properties of Waterborne Polyurethanes: Effect of NCO/OH Ratio
Composite Behavior of Concrete Slab with Steel Decking under Flexural
Loading
Numerical Simulation Research of Flexible Shield Support Lateral Caving
Technology
Effect of TiO2 on Mechanical Properties and Microstructure of Magnesium
Aluminate Spinel Refractories
Chapter 2: Micro/Nano Materials
Preparation of Ultrafine Cobalt Ferrite Particles by Solution SHS Method
Effects of Amino Acids in the Defined Medium on Cellulose Production by
Acetobacter xylinum
Two-Step Green Hydrothermal Synthesis of ZnO Powders
Molecular Dynamics Simulation on Micro Couette Flow of Nanofluids
Microstructural Characterization and Properties of Silica Aerogels Doped with
Nano-ITO Powder
Solvothermal Synthesis of Mn-Doped CdS Nanorods Using Single-Source Molecular
Precursors
Cracking Behavior of Oxide Films under Applied Stress
MoB/CoCr Coating by Low Pressure Plasma Spraying against Erosion by Molten
Al-12.07wt.%Si Alloy
Spontaneous Oxidation Route to Se/Te Alloys Nanorods at Room Temperature
Preparation of -Ni(OH)2 with Flowerlike Hierarchical Architectures via
Homogeneous Precipitation Method
Preparation of Chrysotile Nanotubes under Hydrothermal Condition
Oxidative Dehydrogenation of Cyclohexane over Mg-V-O Catalysts Prepared via
Citriate Complexation
A Facile, Green Route - Electron Beam Irradiation to Nanocrystalline Cadmium
Selenide at Room Temperature
Growth of Carbon Nanofibers with Ordered Macroscopic Structures by CVD
Technique
CuO-CoO-MnO/SiO2 Nanocomposite Aerogel as Catalysts Carrier and Its
Cocatalysis Mechanism in the Synthesis of Diphenyl Carbonate
The Research of Nanophotonic Grating Vertical Coupling
Hierarchical Structures of Silicon Oxynitride Nanowires Formed by a
Gallium-Catalyzed In Situ Reactive Technique
Synthesis of MnWO4 Nano-Particles by Low-Temperature Molten Salt Method
Effect of Particle Size on Oxidation Reaction Kinetics Parameter of Cu2O
Powders
Synthesis of Nano-Crystalline Magnesium Chromate Spinel by Citrate Sol-Gel
Method
Synthesis of Nanocrystalline InVO4 by Hydrothermal Process and its
Visible-Light Photocatalytic Activity
Preparation of TiO2 Nanocrystalline Powder with High Specific Area Using Urea
as the Template
Morphology of ZnO Controlled by Anion of Simple Zinc Salt
Microwave-Assisted Preparation of Cu2O Octahedral Microcrystals
Organic Soft Template Method to Arrange Palladium Nanoparticles on
Single-Walled Carbon Nanotubes
Novel Mechanochemical Synthesis of Carbon Nanomaterials by a High-Speed
Ball-Milling
Comparison of Precipitants in Preparing Ultrafine ZnO Powder
Step-Scan DSC Study on the Melting Behavior of Polypropylene/Attapulgite
Nanocomposites
Synthesis of Polystyrene-B-Poly(Ethylene Oxide)monomethyl Ethermethacrylate
Block Copolymers and its Self-Assembly in Aqueous Solution
Batch Supercritical Hydrothermal Synthesis of CeO2 Nanoparticles
Effects of Anion on the Morphologies of ZnO Synthesized by an Aqueous
Solution Method
Research on Pollution-Free Separation of Wheat Straw Cellulose by
Ethanol/Acetic Acid Solvent System
Effects of Synthesis Parameters on Controllable Growth of Highly-Ordered TiO2
Nanotube Arrays
Investigation of Morphology of Vetier (Vetiveria zizanioides) Cellulose
Micro/Nano Fibrils Isolated by High Intensity Ultrasonication
Enhancement of Thermal Conductivity with Carbon-Encapsulated Copper
Nano-Particle for Nanofluids
Selective Oxidation of Cyclohexane to Cyclohexanone and Cyclohexanol over
Au/Co3O4 Catalyst
Dispersibility of Nano TiN Powder in Ethanol Liquid
Electronic Transport Properties of the Azobenzene-Based Optical Molecular
Switch with Different Substituents
Research on Solvothermal Synthesis of Phase Composition Controllable
Nanocrystalline TiO2 Powders
Improvement of Tribological Behaviour of Biomedical Nanocrystalline Titanium
by Magnetron Sputtered CNx/SiC Double Layer Films
Sonochemical Synthesis of Nanocrystalline MgSeO3 and its Photocatalysis
Behavior
Periodic Changes Effects of Distance between Magnetic Barriers on Electron
Transport in Nanostructure
Fabrication and Characterization of YAG Nanopowders by Co-Precipitation under
Ultrasonic Radiation
Chapter 2: Micro/Nano Materials
The Characteristics of Natural Occurred Carbon Nanotubes - from Transmission
Electronic Microscopy and Raman Spectroscopy
Micro-Stress Transfer of CNT and CNT-Interface in CNT Reinforced Mg-Matrix
Composites
Experimental Research on the Relationship between Dielectric Constant and
Compressive Strength of Cement Concrete Materials
Microstructure and Magnetic Behavior of One-Dimensional Co0.5Zn0.5Fe2O4
Nanofibers
Microwave-Assisted Synthesis and Photocatalytic Activity of Quantum-Sized
ZnO
Simulation of Electron Transport in Silicon using Monte Carlo Method
Characterization and Electrochemical Properties of Nitrogen-Doped Ordered
Microporous Carbons Containing Well-Dispersed Platinum Nanoparticles
Preparation of Ultrafine ZnO Powder by Precipitation Method
The Microstructure and Mechanical Properties of ZrAlN/Cu Coating
Sol-Gel Synthesis and Characterization of Silica Materials Using
Surfactant-Like Organic Acid Compounds as Templates
Comparison of Reactively Sputtered HfO2 and HfSixOy Dielectrics for High
Density Metal-Insulator-Metal Capacitor Applications
Controlled Synthesis of Hollow TiO2 Nanospheres Templated by Polymeric
Micelle with Core-Shell-Corona Architecture
Effect of Nano-Graphite on Friction Performance of Cu-Based Friction
Material
Synthesis and Catalytic Properties of FeZSM-35 Zeolites Directed by
Alkyl-polyamine Triethylene-tetramine
Influence of Rolling Reduction Ratio on Continuous Confined Strip Shearing
Deformation Procedure Using Finite Element Analysis
Morphology and Properties of Carbon Nanotubes Modified Epoxy
Gas-Electrospun Degradable PEG/PBT-HA: Potential Scaffold for Tissue
Engineering
Research on Fault Diagnosis System for Mine Hoist
Bayesian Network Learn Method for Machine Tool Thermal Stability Modeling
Synthesis and Catalytic Property of V-MCM-41 Mesoporous Molecular Sieves by
Atrane Route
Characterization and Thermal Properties of the Microencapsulated PCM Slurry
Study on the Preparation of Ultramicro Molybdenum Nitride Powder and Wear
Properties of Its Coating
Characteration of Protein Loaded Chitosan Nanoparticles at Different pH
Values
Growth and Photoluminescence Properties of ZnO Microrods
Synthesis of Nanocrystalline Silver by Warm-Vacuum-Compaction Method
Multidisciplinary Design Optimization Method and Algorithm Based on iSIGHT
Preparation of Spheric and Hollow TiO2 Electrophoretic Nanoparticles
Preparation of TiO2 Films on Quartz Glass Plate and Its Study of
Photocatalytic Properties in Ultrasound
Preparation And Photoelectric Properties Of CuCr2O4 Nanopowders
Investigation of Ultrasonic Electroplating Ni-P Coatings on Nd-Fe-B Permanent
Magnet
Effects of Fly Ash Particle Sizes on the Compressive Strength and Fracture
Toughness of High Performance Concrete
Antioxidative Activity Evaluation of CoQ10-Nanostructured Lipid Carrier
Microstructure and Tensile Properties of Ultrafine Grained Pure Al Sheets
Produced by Accumulative Roll Bonding
Experimental Study on Strengthened Bridge Structures with Carbon Fiber Plate
Research on Tribological Properties of Serpentine Particles as Lubricating
Oil Additives
Synthesis of H-In2O3 and C-In2O3 by Different Methods and Gas Sensing
Properties
Synthesis of C60-Doped Polyaniline Nanoshuttles
Facile Solvothermal Route to Synthesize Indium Tin Oxide Nano-Plates,
Nanoparticles and Nanorods
Chapter 3: Iron and Steel
Effect of Magnesium on Characteristics of Thermal Analysis Curve of Compacted
Graphite Iron
The Influence of Critical Turning Point of Argon Flowrate Ascension on
Decarburization Rate of RH Treatment for Ultra-Low Carbon Steel
Research on Key Technologies of 38CrMoAl Steel Produced by BOF-LF-RH-CC
Process
Experimental Study of Softening and Melting Properties on Indonesia
Vanadium-Titanium Sinters
Resistance Matrix of Micro-Carbon Steel Rolled in Ferrite Region
Determination of IMC-80BH Corrosion Inhibitor Concentration and Practical
Application in Gas Field
Effect of Cooling Rates after Finish Rolling on Microstructure and Properties
of Microalloyed Steels Used for Fracture Splitting Con-Rods
Thermodynamic Analysis on Precipitation of Nonmetallic Inclusions in Gear
Steel
Fabrication of Electroconductive Si3N4TiN Ceramic from Iron Ore Tailing
Physical Modeling of Fluid Flow Characteristics in a Delta Shaped,
Four-Strand Continuous Casting Tundish with Different Flow Control Devices
Minimum Al Content for Forming Alumina Scale on Creep Resistant Ferritic
Steels at 650 °C
Effect of Austempering Temperature on Microstructure and Properties of
Carbidic Austempered Ductile Iron
The Research on Long Life for Top and Bottom Combined Blown Converter on
Semi-Steel Steelmaking
SEM In Situ Investigation on Fatigue Cracking Behavior of X80 Pipeline Steel
with Inclusions
The Effect of Large Reduction on the Microstructure and Properties for As-Hot
Rolled Dual-Phase Nb-Bearing Steel
Research On The Requirement Of Impact Toughness For Petroleum Drill Pipe
Steel Used In Critical Sour Environment
Influence of Titanium Compounds on Melting and Crystalline Temperature of
Mold Powder
Research of Transverse Corner Crack and Optimization of Concasting Process
for Bloom of Peritectic Steel Q235D
Study on Mechanical Properties of Ribbed Cast Steel Spherical Joint in
Complex Stress State
Effect of Ce on the Mechanical Properties of 1Cr18Mn8Ni5N Stainless Steel
Study of Scale Effect on the Iron Oxide Reduction
Study on Effect of Pulse Electric Field on Solidification Process of Fe-C-S
Alloy Melt
Effect of Slag-Metal Reaction on Transformation of Al2O3 inclusions in
Pipeline Steel
Fatigue Crack Propagation Analysis of X60 Pipeline Steel Pipelines with
Defects
BF Charge Reduction with Gases of Different H2 Ratio in High Temperature
Zone
Exploiting a Simple Spectrophotometric Method for the Determination of
Manganese in High Strength Line Pipe Steels
Numerical Simulation of Temperature in the Freeboard of COREX Melting
Gasifier
Fundamental Study on Extracting Vanadium from Vanadium-Bearing
Titanomagnetite
Effect of Nb on Microstructure Evolution of Coarse-Grained Heat-Affected Zone
with Large Heat Input Welding
Preparation of High Silicon Steel by Pulse Electrodeposition in Molten Salt
Study on the COREX Melter Gasifier Zones Using Temperature Gradient
Effect of 0.06%Nb on the Microstructure and Mechanical Properties of
Mn-Series Low Carbon Air-Cooling Bainitic Steels
An Iterative Algorithm to Determine Hot Strand Pressures during Continuous
Casting of Round Blooms
Study of Mold Fluid Flow on a New Type Nozzle Bottom in Continuous Casting of
Steel
Optimizing of Flow Control Devices in a Single Strand Continuous Casting
Tundish
Research on Steelmaking Dust Based on Difference of Mn,Fe and Mo Vapor
Pressure
Effects of Rare Earth on the Impact Toughness of High-Carbon Steel
Study on Thermal Deformation and Recrystallization Behavior of Cu-P
Weathering Steel
Effects of B-Mg Additive on Metallurgical Properties of Oxidized Pellets
Study of Reduction Characteristic on Microwave Magnetizing Roast of Hematite
Effect of Process Parameters on Microstructural Evolution and Grain
Refinement in a Low Carbon High Strength Microalloyed Dual Phase Steel
Study of Low Carbon Steel on Microstructe of Slag Film
Study on the Influence of Inclusion and Void on Fatigue Life of Bearing Steel
Using Statistics of Extreme Values
Three Dimensional Simulations on Stress Distribution and Fatigue Damage Life
of Wheel/Rail Contact Region
Adaptive Neural Network Modelling in Fatigue life Prediction under Load
History effects
Effect of M/A Constituents on Mechanical Properties of High Grade Pipeline
Steel
Precipitation Hardening of Titanium Carbides in Ti Micro-Alloyed Ultra-High
Strength Steel
Study on Sulfur Existing Form in Sinter
Experimental Study on Tundish Flux System for High Al-Containing TRIP Steels
Slab Casting
Study on Smelting High-Al Cold Heading Steel SWRCH6A Using Single-Slag
Process
Effects of Modification on Stress Field of the Inclusions in Large Rudder Arm
Steel Casting
Metallographic Analysis of Non-Orientation Silicon Steel W20 in Different
Shearing Deformation Area
Numerical Simulation of Nozzle Clogging of Ferritic Stainless Steel
Influence of Sijiaying Iron Ore on the Structure of Sinter
Chapter 4: Ceramic
Study on Preparation and Characterization of YAG Ceramic Synthesized by
Co-Precipitation
Preparation of Fine Ag2WO4 Antibacterial Powders and Its Application in the
Sanitary Ceramics
Preparation and Characterization of Zircon Ceramic Doped with Cerium
Potential Applications of Foam Ceramics in Gas Explosion Prevention
The Effect of Yb2O3 Addition on Sintering of MgO Ceramic
Fabrication of High-Porosity Silicon Nitride Ceramics with Excellent
Mechanical Properties
Effects of Second Phase and Defect on Electrical Properties in
Bi0.5Na0.5-xKxTiO3 Lead-Free Piezoelectric Ceramics
Effect of Compound Additives of Li2O-B2O3-SiO2 Glass and LiF on the
Properties of CaO-Li2O-Sm2O3-TiO2 Ceramics
Characterization and Mechanical Properties of TiN/O-Sialon Ceramics Prepared
from High Titania Slag
Preparation of Porous Catalyst Support with Gangue of Bauxite Tailing
The Effect of Bending Radius on Thickness Distribution in Hydroforming of
Conical-Cylindrical Cups
Influence of Nano-Y2O3 on Crystallization Behavior and Sintering Performance
of Fused Quartz Ceramic Materials
The Influence of Different Particle Size of Carbon Powders on the Preparation
of Porous Silicon Carbide Ceramic
Influence of Poling Conditions on the Characteristics of PZT Ceramics
Preparation of Porous Silica by Acid Dissociation of Thermally Activated
Kaolinite
Finite Element Simulation and Experimental Study of the Effect of Cone Angle
on Thickness Distribution in Hydroforming of Conical-Cylindrical Cups
The High-Performance of Cerium Doped Sodium Bismuth Titanate Aurivillirs
Phase Material
Influence of Heat Treatment on Glaze Melting Characteristics
The Research on High Pressure Sintering of Mixed Powder -Si3N4 and -Si3N4
Function Basis for Mechatronic System Design
Effect of La2O3 on the Microstructure and Electrical Properties of
0.82Bi0.5Na0.5TiO3-0.18Bi0.5K0.5TiO3 Ceramics
Formation Mechanism of Porous Silicon Carbide Ceramic Synthesized by Coat-Mix
Process
As(III) Removal from Low-Arsenic Concentration Drinking Water by Coagulation
with Quadrivalent Titanium Coagulants
Alumina Gelcasting by Using Glutin-Urea System
The Study of the Oxygen Permeability of Ba0.5Sr0.5Co0.8Fe0.2O3- Membranes
after Laser Ablation
Preparation of Glass-Ceramics Using Molybdenum Tailings
Structural Characteristics and Dielectric Properties of Nd-Doped SrTiO3
Ceramics by Introducing Ti Vacancies for Valence Compensation
Structure and Microwave Dielectric Properties of (Ca0.9375Sr0.0625)0.25
(Li0.5Sm0.5)0.75TiO3 Ceramics with B2O3-CuO Sintering Aids
Influence of Different Precursors upon Characterization of Bismuth Titanate
Powders Prepared by Chemical Methods
Molten Salt Synthesis of Anisotropic Bi4Ti3O12 Particles
Analysis of PZT Piezoelectric Ceramics Based on Finite Element Softeware
ADINA
Preparation and Dielectric Properties of Li2O Doped BaZr0.25Ti0.75O3
Ceramics
Phase Stability and Dielectric Properties of Low Temperature Fired BaTi4O9
Microwave Material with Copper Electrodes in Reducing Atmosphere
Synthesis of ZrTiO4 and MgAl2O4 Powders via Non-Hydrolytic Sol-Gel Route
Using Alcohol as Oxygen Donor
Chapter 5: Metal alloy Materials
Preparation of High-Purity Titanium by Molten-Salt Electrolysis Process
Research on Transient Behavior of Aluminium in Laser Micro-Molton Pool
The Wear and Drag Prediction of the 2D Micro-Asperities on Textured Wall
Effect of Conventional Cold Rolling on Wear-Resisting Performance of High
Manganese Steel
A Channelized Deadlock Prevention Policy for Flexible Manufacturing Systems
Using Petri Net Models
Microstructure Evolution of ZK60M Twin-Roll-Casted Magnesium Alloy during Hot
Compression and Annealing
Influence of Boron on the Micro-Organization Mechanism of Zirconium
Containing Aluminium Alloy
A Practical and Selective Method for the Analysis of Molybdenum in Grade T91
Tube and P91 Pipe Intended for Power Plants
Study on Over-Burnt Temperature and Heat Treatment of a New Al-Mg-Si-Cu
Alloy
Study on Thermal Simulation of a New Al-Mg-Si-Cu Alloy
Effect of Desorption Hydrogen Pressure on Anisotropy of HDDR-Treated Nd-Fe-B
Powders
Effect of Y on Microstructure and Corrosion Resistance of AZ61 Magnesium
Alloy
Effects of the Vibration and Low Pressure on Solidification Microstruction of
Zinc-Aluminum Alloy
Effects of Anisotropy on the Microstructural Characteristics and Mechanical
Behavior of Shock-Loaded of AZ31 Alloy
Correlation of Dynamic Response with Adiabatic Shearing Behavior in
Ti10V2Fe3Al Alloy
The Oxidation of Co-10Cr Alloys in 1 Atm of Pure O2 at 700 and 800C
Corrosion of Amorphous Fe73.5Si13.5B9Nb3Cu1 Alloys on the Synergistic Effect
of Chloride and Hydroxyl Ions
Effect of Er on Ignition-Proof Property of Mg-Zn Alloys
Preparation and Characterization of As-Cast and Hot-Rolled Mg-5Al-0.3Mn-1Ce
Alloy
Microstructure and Creep Property of As-Cast Mg-6Al-XSr(x=0, 2, 3) Alloys
Influence of Y Element on Microstructure and Mechanical Properties of ZK60
Alloy
Analysis of LIGA-Ni Microstructure
Dynamic Deformation Behavior of As-Extruded Mg-Gd-Y Magnesium Alloy and the
Microstructural Evolution
Microstructures of Low Angle Boundaries of the Second Generation Single
Crystal Superalloy DD6
Influence of Fe on the Formation of Nucleation in Carbon-Inoculated Mg-3%Al
Alloy
Study on the Intergranular Corrosion Behavior of Welding Joint of A7N01-T4
Al-Alloy for High-Speed Train
Investigation on the Microstructure and Mechanical Properties of Hot Forged
Mg8Gd2Y1Nd0.3Zn0.6Zr Alloy
On the Microstructure of Heat-Treated Austenitic Nickel-Base Alloy
Study on the Law of Phrase Transformation of High-Carbon Matrix Steel
4Cr-3Mo-3V-2W
Effect of Cerium on Microstructure and Wearing Resistance of 5CrMnMo Hot
Working Die Steel
Effect of Thermo-Mechanical Heat Treatment on Microstructure and Mechanical
Property of 2197 Al-Li Alloy
Study on the Initial Discontinuity State Distribution of LY12CZ Aluminum
Alloy
On the Oxidation Behaviors of MoSi2 at 673 873 K
Enhanced Tensile Ductility of AZ80 Magnesium Alloy
Experimental Study of Squeeze Casting of ZK60 Magnesium Alloy
Materials with Thermo-Diffusive Hardening
Influences of Complex Modification of RE and P on the Wear Resistance of
Hypereutectic Al-24Si Alloy
Effect of Melting Process on Zr Content and Grain Refinement in ZE41A Alloy
Spark Plasma Sintering of Al6061 and Al2124 Alloys
Effect of Quenching on the Corrosion Morphology of Al-Zn-Sn-Ga Anode Alloy
Study on Regeneration Ability of Oxidation Film on Ignition-Proof Magnesium
Alloy Added with RE
Influence of the Strain Rates on Tensile Properties and Fracture Interfaces
for Mg-Al Alloys Containing Y
The Effects of Cooling Holes on the Creep Life in a Modeling Specimen of
Single Crystal Air-Cooled Turbine Blade
EBSD Study on Boundaries and Texture of 1235 Aluminum Alloy Affected by
Strain Rates
Chapter 5: Metal alloy Materials
Effects of Bi on Mechanical Properties of Magnesium Alloy AZ81
Research of Hot Ductility for ML40Cr with Cold Forging Steel
Study on Corrosion Behavior of Al-Zn-In and Al-Zn-Ga Alloys in NaCl Solution
Chapter 6: Biomaterials
Miscibility Study of Polymer Blends Composed of Polyethylenimine,
Polyethyleneglycol, and Carboxymethyl Chitosan
Studies on Methyl Methacrylate Grafted onto Chitosan by Ceric Ion Initiation
Preparation and Characterization of PMMA-b-PDMAEMA/Polysulfone Composite
Membranes by RAFT Polymerization and their Permeation Performance of Carbon
Dioxide
Thermalstability of Polyclonal Antibody to Salmonella typhimurium on a
Magnetostrictive Sensor Platform
Synthesis and Characterization of Polyesteramides Containing 5-Fluorouracil
in the Main Chain
Effect of Blending Modification on Tensile Performance of CPE/PVC
Two Step Synthesis of Hydroxyl Group Polyimide Based on
2,2-Bis(Amino-4-Hydroxyphenyl)hexafluoropropane
Structural Characteristics of Pheomelanin-Like Pigment from Lachnum
singerianum
A Review on Synthesis and Property of Polyurethane-Imide
Preparation and Characterization of Polylactic Acid/Acetate Starch Blends
with Tetrabutyl Titanate
The Influences of Double Modification on Carbon Fiber Surface and
Microorganism Immobilization Behavior
Preparation of Chitosan - Hydroxyapatite Nanocomposites
Bioceramic Hydroxyapatite Granules for Purification of Biotechnological
Products
Release of Anticancer Drug Doxorubicin from Biodegradable Polymer Coated
Porous Hydroxyapatite Scaffolds
Mechanical Properties and Ordered Structure of Bacterial
Poly(3-Hydroxybutyrate-Co-3-Hydroxyhexanoate) Fibers Stretched after
Isothermal Crystallization near Tg
Effects of Microcrystalline Cellulose on the Thermal Properties of
Poly(3-hydroxybutyrate-co-3-hydroxyvalerate)
Synthesis and Characterization of the Water-Soluble Oleoyl Acetyl Chitosan
Thermal and Mechanical Properties of Bagasse Microcrystalline Cellulose
Reinforced PLA Composites
Preparation and Characterization of Nano-TiO2/PE Antibacterial Films
Assembly of Type I Collagen on PVA Film Induced by Glutaraldehyde Vapor
Study on the Preparation, Property and Drug Release Carrier of Chitosan-Based
Nanoparticles for Cancer Treatment
High Temperature Resistance of Epoxy Adhesives under the Room-Temperature
Curing
Preparation and Application of Hydrophobically Associating Cationic
Polyacrylamide
Directing Human Chondrocytes Cell Behavior by Fabrication of Protein
Micropattern on Polystyrene Surfaces
Synthesis of a Glycodendrimer with Five Repeating Mannoside Units
S-Scan of Ultrasonic Phased Array Testing for Electrofusion Joints of
Polyethylene Pipes
Effect of Cross-Linking Degree on Hydrogels using Surfactant Detergent as
Template
Flame Retardance and Thermal Decomposition of EVA Composites Containing
Melamine Phosphate and Dipentaerythritol
The Effect of Triton® X-100 on CNT/PP Composites Electrical Conductivity
Preparation and Properties of PS/PSEG Composite Materials
The Synthesis and Characterization of Thiophene Derivative Polymers
Imprinted -Cyclodextrin Polymer for Recognition of Naringin
Effect of Peroxide Content on Morphology and Properties of Thermoplastic
Vulcanizates Based on PP and NR
Chapter 7: High Performance Elastomers & Polymers
Synthesis of Carbazoled Poly(Arylene Imino)
Synthesis of Poly(Aryl Sulfone Benzimidazole) Sulfone
Analysis of Performance of PR.S Asphalt Mixture and Application
Poly(Ethylene Oxide)-B-Poly(-Caprolactone) Amphiphilic Block Copolymers:
Synthesis and Self-Assembly
Study on Preparation and Properties of
Polystyrene/Styrene-Ethylene/Butylene-Styrene Composites
Studies on the Solubility of Bonded-Rare Earth Complexes and Fluorescence
Properties of their Copolymers
Synthesis, Characterization and Isothermal Crystallization Kinetics of
Poly(Dodecamethylene Terephthalamide)
Synthesis and Properties Epoxy Resin/Mesoporous Silica-Organic Clay
Nanocomposites
Ultrafine Pd Nanoparticles Synthesis and Catalytic Performance in Methane
Partial Oxidation
Isothermal Crystallization Kinetics of Poly (Phenylene Sulfide)/TiO2
Composites
Synthesis and Characterization of Glucose and Acrylamide Copolymer
Thermal Degradation Kinetics of Poly(Arylene Ether Nitrile) and its
Crosslinked Polymer
Effect of Amphoteric Acrylic Retanning Agent on the Physical Properties of
the Resultant Leather
Research on Al2TiO5-Si3N4 Composites Fabricated by Reaction Method
Effect of Calcium Stearate Concentration on Cure Properties of Epoxidized
Natural Rubber
Static and Dynamic Mechanical Properties of Chlorobutyl Rubber Composites
with Variable Sulfur/Accelerator Ratio
Research on Properties of Liquid Crystalline Polymers as New Packaging
Materials
Research Development on Heating System of EVs Battery Pack
Experimental Study on the Anti-Permeability Properties of Polymer Grouting
Materials
Preparation and Magnetic Properties of the Core-Nanoshell Composite Materials
Doped with Nd
Preparation of a Certified Reference Material of Trifunctional Polypropylene
Oxide
Mechanism of the Modulus Increase of Carbon-Black-Filled Rubber at Small
Extension
Finite Element Analysis and Optimization of Spreading System of Rapid
Prototyping Machine for Ceramic Parts Based on ANSYS
Chapter 8: Materials Physics
Preparation and Performance of Polyethylene Glycol / Polyacrylamide Phase
Change Material
Elastic Properties and Electronic Structure of L12 (Al,Si)3Sc
Effect of Surface Treatment for Carbon Nanotubes on Morphological and
Rheological Properties of Polyarylene Ether Nitriles Nanocomposites
Modeling Radial Variation in Microfibril Angle of Scots Pine
Light Yield Non-Proportionality and Energy Resolution of Lu1.8Y0.2SiO5:Ce and
LaCl3:Ce Scintillation Crystals
Comparison of Lu0.7Y0.3AP:Ce and Bi4Ge3O12 Scintillators in Gamma Ray
Spectrometry
The Surface Characteristics and Friction Properties of PTFE Yarn
Study on the Influence of Rheological Properties on the Printing Quality of
Ink
The Effect of the Proportion of Prepolymer and Monomer on the Performance of
UV Offset Ink
Induced Amorphization in Pyrographite by Radiation Using High Voltage
Transmission Electron Microscope
Electronic Structure of CdSe/CdXZn1-XS Core/Shell Quantum Dots
Factors Influencing Dye Colors
The Spin-Dependent Electronical Conductivity of Polarons in the Spin
Polarized Organic Semiconductor
Numerical Study on Characteristics Shock Initiation of Double-Shell Charges
by Hypervelocity Impact
Traveling Wave Exact Solutions for Nonlinear Coupled Scalar Field Equations
A Method of Reducing Volatile Compounds in Polypropylene Packaging Materials
Lu1.8Y0.2SiO5:Ce and LaCl3:Ce Scintillators for Gamma-Ray Detection
Chapter 9: Materials Chemistry
A Study on the Photolysis Behavior of Photoacid Generators
High-Efficiency Modified Alkyd Resin Application Research
Investigation on Direct Electrolytic Reduction of the CaTiO3 Compounds in
Molten CaCl2-NaCl for the Production of Ti
Capacitive Performance of Ordered Mesoporous Carbons in Ionic Liquids
Study on Character of Ilmenite Modified by Thermal Treatment
Corrosion-Deformation Interactions (CDI)of AA2024-T3 in Chloride Media
CO2 Adsorption Performance of N-Doped Ordered Microporous Carbons Templated
from Zeolite HY
Preparation Research of CaB6 Powder by Self-Propagating High-Temperature
Synthesis
Study of Synthesis and Properties on Poly L-Glutamate Initiated by Aniline
Study on the Electrochemical Behaviors of CeO2 in Eutectic CaCl2 NaCl Melt
Study on the Chemical Constituents of Apocynum venetum Bark
Experimental Study on the Fire Characteristics of Indoor Combustible
Materials
Study on Recovery of Vanadium from Low-Vanadium Slag by Calcified Roasting
Methods
Electrochemical Behavior of Tubular Steel Corrosion in Brine Containing High
Contents of H2S and CO2
Characteristics of Calcium Carbonate Crystal Structure and Size Distribution
in Solution under the Electromagnetic Field
Sol-Gel Synthesized Fe-P-O Catalyst for the Benzylation of Benzene with
Benzyl Chloride
Direct Electrochemical Preparation of Chromium Powder in Molten Salts
Chapter 10: Optical/Electronic/Magnetic Materials
Synthesis and Photoluminescence Properties of Hierarchical
Bis(8-Hydroxyquinoline) Nickel Flower-Like Structure
Identification of White Light Emission with Two Complementary Colors in
Organic Light-Emitting Devices
Study on Phase Composition of Long Persistence Phosphors
SrAl2O4:Eu2+,Dy3+Synthesized by Combustion Synthesis Method
Analyses of Transmission Characteristics of a Magneto-Optic Material Used for
Faraday Optical Filters at 532nm
Analysis of Recovery Current Related to Core Material and Structure of DC
Power Supply in High Voltage Active Electronic Current Transformer
Preparation of Ta-Ti Co-Doped VO2 Polycrystal Thin Film with High Resistance
Temperature Coefficient and without Hysteresis
Comparative Study of the Properties between Transparent Conducting ZnO:Zr and
ZnO:Al Films Deposited by DC Magnetron Sputtering
Preparation and Corrosion Resistance of Electroless Plating of Ni-Cr-P/Ni-P
Composite Coating on Sintered Nd-Fe-B Permanent Magnet
X-Ray Photoelectron Spectroscopy of (La0.7Sr0.3)MnO3Thin Films Prepared by
Pulsed Laser Deposition
Novel Terbium-Cerium Coordination Polymer: Synthesis, Characterization and
Fluorescence Properties
Electrical Behaviors of LEDs Prepared by Wide-Band GaN Material
Microstructure, Magnetic and Optical Properties of Metal/ Semiconductor
Magnetic Granular Film
Synthesis and Properties of
1,4-Bis(2'-Aryl-1',3',4'-Oxadiazole)-1,3-Butadiene and its Analogues
Effect of Alkali Hydrogen Peroxide Pre-Extraction on APMP Pulping Process of
Pink Sheets Bamboo
Bifunctional Fe3O4@SiO2@Eu-Polyoxometalates Nanoparticles and Study on their
Magnetism and Luminescence
A Lead Free Graphite Conducting Paste for Screen Printing
Study on the Electro-Optcial Properties of GH LCD
A New Photochromic Diarylethene for Reversible Molecule Switching Properties
Based on Pyrrole and Thiophene
Saint Venant Solutions in Symmetric Deformation for Rectangular Transversely
Isotropic Magnetoelectroelastic Solids
Three-Dimensional Optical Bit Memory in Sm(DBM)3Phen-Doped and Un-Doped
Poly(methyl methacrylate)
Investigation of V Residence in Sr2(Fe1-XVX)MoO6 Compounds
Mn3+ Ion Co-Doped in Y3Al5O12Ce3+ Phosphor to Enhance the Red Spectral
Emission
Thermoelectric Properties of Cu-Substituted Bi2Ca2Co2Oy Misfit Oxides
Preparation of Manganese Ferrite Powders by Mechanochemical Process
Electrochemical Deposition Mechanism of Polyaniline at High Potential in
Organic Electrolyte
Research on Photoluminescence Characteristics of the Active Cl-Doped ZnS
Microstructure of In Situ Al3Ti0.4Zr0.6p/Al Fabricated with Electromagnetic
Field
Chiral Liquid Crystal Polymers Containing Electron Donor- Acceptor
Action-Synthesis and Characterization
Structures and Electronic Spectroscopy of Rhodium-Based Complexes: a
Theoretical Study on Promising Optical Materials
Preparation of Polymethyl Methacrylate-NaYF4:Yb:Er Composite Material Used
for Holographic Display
Dielectric Properties Investigation of Mg-Doped Barium Titanate Ceramics
Improvement of Giant Magneto-Impedance Effect in Fe-Based Nanocrystalline
Wires
Growth of KNbO3 Crystal by a Pulling down Method
Improvement of Magnetic Properties of La3+-Co2+ Substituted SrFe12O19
Reduced-Pressure Melts Growth of the Vacuum Ultraviolet Double Frequency
Crystal KBe2BO3F2 (KBBF)
A New Structure of the 2D Photonic Crystal Microcavities with Hexagonal
Lattice
Chapter 11: Other Related Topics
Composition and Properties of Phosphate Cement
MCM-41 Anchored Manganese Salen Complex as Catalysts for Cyclohexene
Oxidation
TiAl Alloy Spark Plasma Sintered from Mechanically Activated Powders
Research and Application of Lost Foam Technology of Goods Train Low-Carbon
Alloy Steel Casting
The Analysis of Toy Design Factor for Customer Loyalty in Taiwan
Effect of Deformation on the Austenite to Pearlite Transformation
Analysis of Microstructure of Phosphate Cement
The Effect of PTFE on the Mechanical and Friction and Wear Properties of
GF/PA6 Composites
Catalytic Application of H4SiW12O40/SiO2 in Synthesis of Acetals and Ketals
Friction and Wear Properties of Carbon Fiber Reinforced Polypropylene
Composites
Study on Mechanical Properties of Polyurethane Elastomers for Drum Scraper
Heat Treatment of Heavy Forgings with diameter 1700mm
Study on the Interaction of Fluorescent Probe 2-(2'-Chloro
Phenyl)-5-(2'-Hydroxyl Phenyl)1,3,4-Oxadiazole with DNA
Preparation and Properties of PVA/PAAm IPN Hydrogels-Copper Nanoparticles
Nanocomposites
Catalytic Activity of SWNTs/Pd Catalyst in Suzuki Reaction
Force Calculation of Cycloid Gear at Three Supporting Points Of Gear Pin for
Speed Reducer with Three Cycloid Gears
Preparation of Nano Ti3SiC2/MoSi2 Composite by SPS Process
Preparation and Application Performance Study of High Purity Montmorillonite
The Influence of Factors on W/Mo Bimetal Compound Pressing
Investigation on Denitrogenation Technology and Mechanism during VIM Refining
Ni-Base Superalloy
Research on Test about Stress Corrosion Cracking of SPV50Q Spherical Tank
Thermo-Sensitive Materials for the Time-Temperature Indicator
Design for a Type of Vertical Rotary and Adjustable Magnetorheological
Rheometer
Hydrothermal Synthesis and Characterization of Fe-Doped Na0.5Bi0.5TiO3
The Research on Aeroelasticity of the Vehicle Wing Surface
Fault Diagnosis to a Rolling Bearing in a Blowing Machine Based on the
Theories of EMD and Intrinsic Modal Energy Entropy
Prediction of Heat Distribution Shape and Nozzle Diameter of Plasma Arc
Cutter
Analysis of the Influence of the Heat Input and Bead Volume on HAZ Hardness
for Submerged Arc Welding Process of Mild Steel Plates
3rd Degree Mathematical Model Appropriate for Parametric Estimation of SAW
Process
Prediction of Temperature Distribution on Submerged Arc Welded Plates through
Gaussian Heat Distribution Technique
Prediction of HAZ Width of Submerged Arc Welded Plates
The Parametric Modeling for Die Base in SolidWorks
Research for CNC Machine Tool Servo System Fault Diagnosis Expert System
Fracturing Mechanism of Marine Gas Hydrate with Vibration and Model of
Experimental Device
The Enrichment Regularity of Rare Earth Elements and Resource Characteristics
in Polymetallic Nodules/Crusts
Study on Missile Thick Wall Temperature Calculation for Aerodynamic Heat
Friction/Wear Properties of Magnetron Sputtered TiB2-TiN Composite Films on
Biomedical Metallic Titanium Alloy
Reliability Optimization Design of Gear Box
A New Coagulant for Spilled Oil Removal with Bentonite and Calcium Chlorine
and Sawdust
The Study of Projectile Penetration into Aluminum Armor Plate
Investigation on Flexural Performance of RC Beams Flexurally Strengthened by
Soffit-Bonding and Side-Bonding CFRP Sheets
