Atjaunināt sīkdatņu piekrišanu

Nanostructured Biomaterials for Cranio-Maxillofacial and Oral Applications [Mīkstie vāki]

Edited by (Researcher, Biomaterials and Biomedical Materials Science, Federal University of Santa Catarina (UFSC), Brazil, University of Minho, Portugal), Edited by , Edited by (Professor, Material), Edited by (Full Professor, Federal University of Santa Catarina (UFSC), Brazil)
  • Formāts: Paperback / softback, 238 pages, height x width: 235x191 mm, weight: 450 g
  • Sērija : Micro & Nano Technologies
  • Izdošanas datums: 14-Apr-2018
  • Izdevniecība: Elsevier Science Publishing Co Inc
  • ISBN-10: 0128146214
  • ISBN-13: 9780128146217
Citas grāmatas par šo tēmu:
  • Mīkstie vāki
  • Cena: 188,66 €
  • Grāmatu piegādes laiks ir 3-4 nedēļas, ja grāmata ir uz vietas izdevniecības noliktavā. Ja izdevējam nepieciešams publicēt jaunu tirāžu, grāmatas piegāde var aizkavēties.
  • Daudzums:
  • Ielikt grozā
  • Piegādes laiks - 4-6 nedēļas
  • Pievienot vēlmju sarakstam
  • Formāts: Paperback / softback, 238 pages, height x width: 235x191 mm, weight: 450 g
  • Sērija : Micro & Nano Technologies
  • Izdošanas datums: 14-Apr-2018
  • Izdevniecība: Elsevier Science Publishing Co Inc
  • ISBN-10: 0128146214
  • ISBN-13: 9780128146217
Citas grāmatas par šo tēmu:

Nanostructured Biomaterials for Cranio-Facial and Oral Applications examines the combined impact of materials science, biomedical and chemical engineering, and biology to provide enhanced biomaterials for applications in maxillo-facial rehabilitation and implantology. With a strong focus on a variety of material classes, it examines material processing and characterization techniques to decrease mechanical and biological failure in the human body. After an introduction to the field, the most commonly used materials for cranio-facial applications, including ceramics, polymers and glass ceramics are presented. The book then looks at nanostructured surfaces, functionally graded nanobiomaterials and the manufacturing of nanostructured materials via 3-D printing.

This book is a valuable resource for scientists, researchers and clinicians wishing to broaden their knowledge in this important and developing field.

  • Explores the techniques used to apply nanotechnology to biomaterials for cranio-facial and oral applications
  • Bridges the gap between fundamental materials science and medicine
  • Shows how nanostructured biomaterials respond when implanted in the human body
Contributors ix
Editors Biography xiii
Preface xv
Chapter 1 Current state of nanostructured biomaterials for oral and cranio-maxillofacial rehabilitation
1(12)
1.1 Introduction
1(2)
1.2 Nanoscale Texturized Surfaces of Implants
3(1)
1.3 Nanostructured Bioactive Ceramics and Composites
4(3)
1.4 Functionally Graded Nanostructured Biomaterials
7(1)
1.5 Concluding Remarks
8(5)
References
9(4)
Chapter 2 Nanostructured surfaces of cranio-maxillofacial and dental implants
13(28)
2.1 Introduction
13(1)
2.2 Dental and Cranio-Maxillofacial Implants
14(1)
2.3 Titanium Surface
15(1)
2.4 Physical and Chemical Methods for Modification of Implant Surfaces
16(15)
2.4.1 Modification of Surfaces by Grit-Blasting and Etching
21(2)
2.4.2 Functionalization of Titanium Surfaces by Anodization
23(5)
2.4.3 Functionalization by Using Bioactive Ceramics
28(2)
2.4.4 Surfaces Coated by Synthetic and Natural Absorbable Polymers
30(1)
2.5 Concluding Remarks
31(10)
References
32(9)
Chapter 3 Degradation of titanium-based implants
41(22)
3.1 Introduction
41(2)
3.2 The Corrosive Oral Environment
43(2)
3.3 Corrosion of Titanium
45(2)
3.4 Simultaneous Degradation of Titanium by Corrosion and Wear Interactions
47(4)
3.5 Interaction Between Wear Debris and Surrounding Tissues
51(3)
3.6 Concluding Remarks
54(9)
References
55(8)
Chapter 4 Adverse local and systemic effect of nanoparticles released from oral and cranio-maxillofacial implants
63(18)
4.1 Introduction
63(1)
4.2 Degradation Products Released From Implant and Prosthetic Structures
64(2)
4.3 Local Toxicity Surrounding Prosthetic and Implant Structures
66(4)
4.4 Evidence of Systemic Toxicity Caused by Degradation Products
70(2)
4.5 Current Limitations on the Cytoxicity of Wear Particles
72(1)
4.6 Concluding Remarks
73(8)
References
73(8)
Chapter 5 Nanostructured polymer matrix composites for oral and cranio-maxillofacial rehabilitation
81(16)
5.1 Introduction
81(1)
5.2 History of Polymeric Materials in Dentistry
82(2)
5.3 Inorganic Fillers for Resin Composites
84(4)
5.4 Thermoset Polymer Matrix Composites
88(1)
5.5 Thermoplastic Matrix Composites
89(5)
5.6 Currents Status and Future Challenges
94(3)
References
95(1)
Further Reading
96(1)
Chapter 6 Nanostructured biocompatible ceramics and glass-ceramics
97(22)
6.1 Introduction
97(1)
6.2 Bioacompatible Ceramics and Glass-Ceramics
97(11)
6.2.1 First Generation: Bioinert Ceramics
98(1)
6.2.2 Second Generation: Bioactive Ceramics
99(8)
6.2.3 Third Generation: Tissue Self-Regeneration Inducers
107(1)
6.3 Nano-Pores and Hierarchical Porosity
108(4)
6.3.1 Macro, Meso, and Microporosity
110(2)
6.3.2 Ceramic/Polymer Composites for Bone Reconstruction
112(1)
6.4 Future Perspectives
112(7)
References
113(4)
Further Reading
117(2)
Chapter 7 Platelet-rich fibrin to incorporate bioactive graft materials
119(24)
7.1 Introduction
119(1)
7.2 Morphological and Biological Aspects of PRF
120(2)
7.3 Protocols for PRF Preparation
122(1)
7.4 PRF Embedding Nano-Porous Bioactive Ceramics
122(6)
7.5 Evidence of Tissue Healing
128(4)
7.6 Concluding Remarks
132(11)
References
133(9)
Further Reading
142(1)
Chapter 8 Nanostructured biomaterials embedding bioactive molecules
143(16)
8.1 Introduction
143(1)
8.2 Mesoporous Biomaterials as a Bioactive Delivery System
144(3)
8.2.1 Mesoporous Biomaterials Incorporation and Release of Bioactive Molecules
145(2)
8.3 Bioactive Molecules Enhancing Tissue Healing
147(2)
8.3.1 Bioactive Molecules for Osteogenesis
147(1)
8.3.2 Bioactive Molecules for Angiogenesis
148(1)
8.4 Bioactive Molecules to Inhibit Bacteria and Biofilms
149(3)
8.5 Bioactive Molecules for Analgesic and Antiinflammatory Effects
152(1)
8.6 Bioactive Molecules for Cancer Treatment
153(1)
8.7 Concluding Remarks
154(5)
References
154(4)
Further Reading
158(1)
Chapter 9 Functionally graded nanostructured biomaterials (FGNB)
159(22)
9.1 Introduction
159(2)
9.2 Bio-Inspired Functionally Graded Nanostructured Biomaterials (FGNB)
161(2)
9.3 FGNB Applied to Prosthodontics
163(3)
9.3.1 Metal-Ceramic Graded Restorations
163(1)
9.3.2 All Ceramic Graded Restorations
164(2)
9.4 FGNB Applied to Implants
166(9)
9.5 Concluding Remarks and Perspectives
175(6)
References
175(5)
Further Reading
180(1)
Chapter 10 Additive manufacturing of nanostructured bone scaffolds
181(30)
10.1 Introduction
181(1)
10.2 Bone Tissue Engineering and Regeneration
182(2)
10.3 Structure and Features of a Bone Scaffold
184(2)
10.4 Additive Manufacturing of Scaffolds
186(4)
10.5 Materials for Manufacturing Bone Scaffolds
190(6)
10.5.1 Bioceramic Materials
190(2)
10.5.2 Biocompatible Polymers
192(1)
10.5.3 Biocomposites for Bone Regeneration
192(1)
10.5.4 Biomaterials as Carriers of Growth Factors
193(3)
10.6 Nanostructured Bone Scaffolds Fabricated by AM
196(4)
10.7 Concluding Remarks and Perspectives
200(11)
References
201(9)
Further Reading
210(1)
Index 211
Jślio C. M. Souza is a researcher and lecturer on biomaterials and oral implantology at the Federal University of Santa Catarina (UFSC), Brazil, and the University of Minho, Portugal. Currently, Dr. Souza is a visiting research professor at the Department of Biomedical Sciences and Restorative Dentistry at the University of Illinois (UIC), USA. Dr. Souza has published several articles and chapters in the field of biomaterials for oral and cranio-maxillofacial rehabilitation as well as a book in oral implantology and therefore acts as a reviewer for a number of leading tier-1 journals in the biomaterial and dentistry field. He is well respected for his expertise on materials characterization, dental biomaterials, oral biofilms and degradation of biomaterials in simulated oral conditions. Dachamir Hotza is a Full Professor at the Federal University of Santa Catarina (UFSC), Brazil. He belongs to the Research Group on Ceramic Materials and Composites (CERMAT) and he is currently the coordinator of the Interdisciplinary Laboratory for the Development of Nanostructures (LINDEN). He has experience in Materials Engineering with an emphasis in ceramics, working mainly in processing, experimental design and nanotechnology. Bruno Henriques is a materials and engineering professor at Federal University of Santa Catarina (UFSC), Brazil, and is research fellow at MicroElectroMechanical Systems research center (CMEMS-UMinho), University of Minho, Portugal. He holds a Ph.D. in Mechanical Engineering and has done post-graduate work in Business Administration. Bruno has co-authored a patent, authored several papers published in international scientific journals, and has participated in several national and international conferences. His research interests are in the fields of powder metallurgy, stress analyses, laser materials processing and functionalization, functionally graded biomaterials and composites for biomedical applications, particularly to oral and cranio-maxillofacial rehabilitation. Aldo R. Boccaccini is Professor of Biomaterials and Head of the Institute of Biomaterials at the Department of Materials Science and Engineering, University of Erlangen-Nuremberg, Germany. Prior to this appointment, he was Professor of Materials Science and Engineering at Imperial College London, UK (2000-2009). He has remained Visiting Professor of Materials at Imperial College London. He is also visiting professor at Nagoya Institute of Technology (Japan), RWTH Aachen University (Germany) and Universidad Nacional de Cuyo (Argentina).

The research activities of Prof. Boccaccini are in the broad area of glasses, ceramics and polymer/glass composites for biomedical, functional and/or structural applications.

Prof. Boccaccini has also developed the electrophoretic deposition technique for production of nanostructured materials and composites with defined surface topography with potential use in the biomedical field. He is the author or co-author of more than 450 scientific papers and 15 book chapters. Boccaccini is Fellow of the Institute of Materials, Minerals and Mining (UK) and of the American Ceramic Society. He is the Editor-in-Chief of the journal Materials Letters” (Elsevier) and serves in the editorial board of several recognized international journals. He has also edited two books with Elsevier.