Atjaunināt sīkdatņu piekrišanu

Physical and Numerical Simulation of Materials Processing [Mīkstie vāki]

Edited by , Edited by , Edited by , Edited by
  • Formāts: Paperback / softback, 1570 pages, height x width x depth: 240x170x79 mm, weight: 3000 g, Illustrations, unspecified
  • Sērija : Materials Science Forum
  • Izdošanas datums: 14-Apr-2008
  • Izdevniecība: Trans Tech Publications Ltd
  • ISBN-10: 0878493921
  • ISBN-13: 9780878493920
Citas grāmatas par šo tēmu:
  • Mīkstie vāki
  • Cena: 678,94 €
  • Grāmatu piegādes laiks ir 3-4 nedēļas, ja grāmata ir uz vietas izdevniecības noliktavā. Ja izdevējam nepieciešams publicēt jaunu tirāžu, grāmatas piegāde var aizkavēties.
  • Daudzums:
  • Ielikt grozā
  • Piegādes laiks - 4-6 nedēļas
  • Pievienot vēlmju sarakstam
Physical and Numerical Simulation of Materials ProcessingPalielināt
  • Formāts: Paperback / softback, 1570 pages, height x width x depth: 240x170x79 mm, weight: 3000 g, Illustrations, unspecified
  • Sērija : Materials Science Forum
  • Izdošanas datums: 14-Apr-2008
  • Izdevniecība: Trans Tech Publications Ltd
  • ISBN-10: 0878493921
  • ISBN-13: 9780878493920
Citas grāmatas par šo tēmu:
Permanent link: https://www.kriso.lv/db/9780878493920.html
Keywords:
This two-volume set contains 249 peer-reviewed papers from an October 2007 conference, highlighting recent academic and experimental accomplishments in the application of physical and numerical simulations to the field of materials science. Some specific paper topics covered include numerical simulation of the induction heating process of continuous casting slab, application of the level set method to the simulation of liquid-gas two-phase flow during mold filling, and gate location optimization in injection molding based on an empirical search method. Other subjects studied include analysis of hammering deformation processes by the dynamic explicit finite element method, hot stamping processing experiments with quenchable boron steel, macrokinetics hierarchies of states at dynamic superplasticity, simulation of internal stress in injection molded parts, and numerical computation of a linear friction welding process. Annotation ©2009 Book News, Inc., Portland, OR (booknews.com)
Preface v
Sponsors vi
Committees vii
Referees of papers xi
Photographs xiii
PART 1
Three-Dimensional Thermo-Mechanical Finite Element Simulation for Casting Ladle Structure under Thermal Loadings
1(6)
S.J. Li
Y.X. Liu
H. Yu
Experimental Research of Elevated Temperature Creep and Stress Relaxation during Continuous Straightening
7(7)
Y. Man
X.K. Li
L.D. Yang
Derivation and Application for Time Step Model in Simulation of Solidification Process
14(8)
W.B. Gong
L.L. Chen
J. Hao
The Computer Solidification Simulation of Oceangoing Freighter Rudder Horn
22(5)
J.P. Xie
A.Q. Wang
W.Y. Wang
J.W. Li
H.M. Zhang
J.L. Hou
Microstructures of Rapidly Solidified Hypereutectic Al-Si Alloy with Low-Titanium Content
27(5)
A.Q. Wang
J.P. Xie
Z.X. Liu
J.W. Li
W.Y. Wang
S.Q. Yan
Numerical Simulation of Rheo-Diecasting Mould Filling Process of Semisolid Magnesium Alloys
32(5)
H. Yan
T. Wang
M.F. Fu
Numerical Simulation of Induction Heating Process of Continuous Casting Slab
37(6)
H. Liu
L.L. Chen
J.X. Zhou
Application of Level Set Method to the Simulation of Liquid-Gas Two-Phase Flow during Mold Filling
43(6)
J. Hao
L.L. Chen
J.X. Zhou
Simulation of Gas-Solid Two-Phase Flow to Process of Filling the Foam Mould
49(6)
J.X. Jiang
Z.C. Wu
L.L. Chen
Gate Location Optimization in Injection Molding Based on Empirical Search Method
55(8)
X.Y. Huang
D.Q. Li
Q. Xu
Mold Filling Process Control of Molten Aluminum in Permanent Molds with a Web Gating System
63(6)
Q.M. Chang
D. Schwam
C.J. Chen
J.L. Xiong
J.F. Wallace
Thermal Simulation on Mechanical Properties of Steel Q345 for Continuous Casting Slab
69(6)
D.F. Chen
L. Huang
M.J. Long
L.Y. Wen
L.Y. Dong
Simulation and Investigation on Physical Properties of Continuous Casting Slab AH36 at High Temperature
75(5)
M.J. Long
D.F. Chen
C.G. Bai
L. Huang
L.Y. Wen
Numerical Study of Liquid Core Solidification in Influence of Soft Reduction Deformation on Steel Slab Continuous Casting Process
80(7)
J. Luo
X. Lin
Y.H. Ye
K.W. Liu
Numerical Study on Mold Filling Process of Casting
87(6)
X.Q. Pan
H.Z. Sun
J.D. Chen
Y.L. Zhu
Thermal Analysis of Whirling Unit Attached to Thread Whirling Machine
93(5)
J.H. Son
Y.M. Lee
Casting Process Simulation of the Ball Milling Machine End Cover with a Hug Diameter
98(6)
W.Y. Wang
J.P. Xie
J.W. Li
A.Q. Wang
L.L. Li
H. Yan
H.M. Zhang
Numerical Simulation of Die-Casting Mold Filling Process by Using Fractional Step Method
104(5)
J. Yang
Y.X. Ren
S.M. Xiong
A Cellular Automata Model for Dendrite Structure Simulation
109(6)
L. Yu
L.S. Wu
L.S. Li
Y.C. Dong
Numerical Simulation on the Dendritic Spacing and Microporosity in A356 Alloy Ingot
115(6)
P. Zhang
F.S. Du
Z.Q. Xu
L.L. Zhao
Coupled Numerical Simulation on Heat, Flow and Solution Transport in Double-Stream-Pouring Continuous Casting
121(6)
W.W. Zhang
H.D. Zhao
J.X. Gao
Y.Y. Li
A New Prediction Way to Shrinkage Cavity Formation for Ductile Iron Castings
127(8)
H. Hou
G.W. Zhang
H.K. Mao
J. Cheng
Microstructure Simulation of Die Casting Magnesium Alloy
135(6)
Z.N. Fu
S.M. Xiong
The Simulation of Thermal Field in Induction Melting with Cold-Crucible and Dual Frequencies
141(6)
S.S. Lian
I.H. Wang
J.J. Ke
Control of Liquid Level in Tundish of Strip Caster with Automatic Pouring System
147(7)
Y. Noda
H. Watari
T. Yamazaki
Numerical Simulation of Solidified Structure Formation of Al-Si Alloy Casting Using Cellular Automaton Method
154(10)
K. Ohsasa
K. Matsuura
K. Kurokawa
S. Watanabe
Material Constants of Ferritic Spheroidal Cast Iron during Hot Deformation
164(5)
X. Zhao
Numerical Simulation and Experimental Method for Auto-Panel Forming Defects Analysis
169(5)
H.Y. Xiang
C.J. Leng
Y.X. Zhong
Semi-Enclosed Cold Forging Process Analysis and Progressive Die Design of CPU Fin
174(6)
J.H. Su
F.Z. Ren
L. Wang
Numerical Simulation and Structure Optimization of the Main-Control Reversing Valve of Electrical-Hydraulic Hammer
180(6)
S.W. Du
Y.T. Li
Intelligent Control Experiment Study for V-Shape Free Bending of Wide Sheet Metal
186(6)
J. Zhao
C.J. Su
Y.P. Guan
Forecast of Discharge Voltage for Electromagnetic Tube Forming Based on FEM Analysis
192(6)
H.P. Yu
C.F. Li
J.H. Deng
Investigation to the Damage Tolerance of Composite Cylinder for Vehicles by Numerical Simulation
198(6)
Y.H. Xu
Y.S. Li
H.B. Huang
Research on Closed Die Forging Process of Car Steering Knuckle
204(6)
D.Y. Zhao
L.D. Zhang
H.X. Sun
Study on Effect of Extrusion Velocity on Composites Liquid-Solid Extrusion Process Using 3D Thermo-Mechanical Simulation
210(6)
Z.J. Wang
L.H. Qi
J.M. Zhou
Torque Strength and Influencing Factors Analysis for Assembled Camshaft by Knurling Joining
216(6)
J. Qiao
S.Q. Kou
D.Y. He
S.H. Yang
Study on Mechanical Behavior for Warm Extrusion of AZ61 Magnesium Alloy
222(4)
X. Zhang
Z.M. Zhang
B.C. Li
A Research on Steel Synchronizer Gear Ring's Precision Forging
226(5)
X. Song
Z. Jie
Researches on Rules of the Longitudinal Residual Stress Distribution in Straightening Deformation Zone of Heavy Rail with Multi-Rollers
231(6)
L. Chen
Z.L. Tian
M.C. Gao
W. Zong
J.G. Wang
W.Q. Yang
P.Y. Wang
Z.Z. Wu
Y.Q. Duan
Y.M. Wang
The Application on Initial Design of Auto Panel Based on One-Step FEM
237(6)
Z.H. Deng
Y.P. Huang
Y.Q. Zhang
F. Ruan
Research on Behavior of Slab Surface Defects in Forward Slip Zone during V-H Rolling Process
243(6)
H.L. Yu
X.H. Liu
C.S. Li
L.Q. Chen
A Goal Oriented Numerical Simulation Approach for Computing Stress Intensity Factors in Bimaterials
249(6)
Z.C. Xuan
J.W. Peng
Finite Element Analysis of Stress and Strain in Two-Wedge Cross Wedge Rolling Step-Shaft Part
255(6)
X.D. Xing
X.D. Shu
Analysis of Hammering Deformation Processes by the Dynamic Explicit Finite Element Method
261(6)
L.D. Cheng
Z.J. Wang
Study on Flow Stress Model of a Microalloyed High Strength Steel in CSP Hot Rolling
267(6)
G. Xu
L. Wan
X.Q. Zhang
Z.L. Xue
Thermal-Mechanical Analysis of Metal Forming Based on Meshfree Method
273(9)
G.R. Hua
H.Y. Wen
L.Q. An
Finite Element Analysis of Slab Steel in the Process of Induction Heating
282(6)
R.B. Mei
C.S. Li
B. Han
X.H. Liu
Research on Fast Calculation of Rigid Plasticity Finite Element Method in Hot Strip Rolling
288(5)
C.S. Li
S.N. Song
R.B. Mei
G.L. Zhang
X.H. Liu
The Finite Element Analysis of Serrated Chip Formation in High-Speed Cutting Auto Panel Dies
293(6)
J.K. Ruan
Y.L. Ke
Y. Yang
Hot Stamping Processing Experiments of Quenchable Boron Steel
299(6)
J. Bao
Z.W. Xing
Y.Y. Yang
Research on Cold Taper-Rolling Law of the Spiral Blade Based on Finite Element Method
305(6)
X. Wang
X.B. Fan
H.X. Liu
Finite Element Analysis of Optimum Back Pressure during Equal Channel Angular Pressing
311(5)
F.J. Shi
L.G. Wang
The Contrast Research of the Finite Element Simulation for Ordinary and Fine Blanking with Negative Clearance
316(6)
H. Du
S.M. Ding
Die Design of a Back Panel for a PDP TV Using 3-D Elasto-Plastic Finite Element Analysis
322(6)
D.G. Ahn
H.S. Moon
Metal Flow Behavior on the Non-Uniform Wall Thickness Three-Way Valve Extrusion
328(6)
M. Cheng
Z.M. Zhang
Hot Forging Process Design Optimization Based on Approximate Model and FEM Simulation
334(6)
X.W. Chen
D.W. Jung
A.X. Sun
Macrokinetics Hierarchies of States at Dynamic Superplasticity
340(5)
D.A. Kitaeva
Y.I. Rudaev
Qualitative Physical Modeling and Experimental Study on Forging Method with Horizontal V-Shaped Anvil
345(5)
L.Y. Ni
Y.J. Zhang
S.Q. Yu
Z.B. Liu
A Method of Bulge Test for Determining the Work Hardening Characteristics of Sheet Metals
350(6)
G.F. Gao
X.W. Ding
Releasing Algorithm for Volumetric Locking in Metal Forming Process Simulation Based on Element-Free Galerkin Method
356(11)
Y.J. Guan
X. Wu
G.Q. Zhao
P. Lu
Key Technologies for 3D-FE Modeling of Radial-Axial Ring Rolling Process
367(6)
L.G. Guo
H. Yang
Numerical Simulation and Response Optimizer Design of Strengthening Effects Induced by Laser Shock Peening
373(6)
S. Huang
J.Z. Zhou
Y.Q. Sun
Y.B. Chen
S.Q. Jiang
Improvement of Consumer Properties and Stability of the Technological Process of Hot Rod Stock Production
379(6)
I.P. Mazur
Spatial Structure Injection Molding Analysis of Suspended Bio-Carriers
385(5)
F. Jiang
W.P. Chen
Y.Y. Li
Simulation of Hydroformed High Strength Steel Chassis Parts
390(6)
K.J. Kim
J.S. Kim
B.I. Choi
K.H. Kim
Y.S. Kang
C.W. Sung
S.T. Won
Computer Simulation of Metal Forming Processes
396(6)
K.N. Solomonov
V.P. Abashkin
A New Optimization Method of Constitutive Equation for Hot Working Based on Physical Simulation and Numerical Simulation
402(6)
F.G. Li
X.N. Wang
X.L. Yu
Process Optimization of Laser Micro-Bending Using iSIGHT
408(8)
J. Liu
Y.J. Guan
S. Sun
G.C. Wang
Mechanics Analysis and Numerical Simulation on the Precise Forming Process of Spline Cold Rolling
416(6)
Y.T. Li
J.L. Song
D.W. Zhang
Q.G. Zheng
Simulation of Molding Flow of Sheet Molding Compound in Complicated Dies
422(5)
Q.L. Mei
S.L. Yan
Z.X. Huang
J.J. Guo
Finite Element and Experimental Analysis of Three-Dimensional Flow State of Plastic Melt in Slit Die Section
427(5)
S.X. Qin
G.Q. Zhao
Y. Mu
X.M. Xu
Temperature Prediction of Seven-Pass Finishing Rolling of Hot Thin Strips by FEM
432(6)
Z.D. Qu
Q. Zhang
S.H. Zhang
C. Lei
Research on the Intramode Canning Hot Forging Process for Mn18Cr18N Retaining Ring
438(5)
J.H. Tian
J.S. Liu
H.G. Guo
H.Q. Chen
Research of Favorable Conversion of Friction during Powder Compaction
443(6)
D.G. Wang
Y.C. Wu
M.H. Jiao
T. Xie
J.W. Yu
Simulation of Three-Dimensional Stress Distribution in Compression Dies
449(6)
C.Y. Huang
S.Y. Wang
T. Yang
X.D. Yan
Simulation of the FGH96 Superalloy Microstructural Changes under Different Deformation Conditions
455(7)
X.N. Wang
F.G. Li
Y.H. Liu
Investigation into the Warm Extrusion for Micropart with Laser-Aided Heating Method
462(6)
Y. Wang
Z.Y. Xu
P.L. Dong
G.D. Yuan
L. Cai
Strength Analysis of Elastic Bar Based on ANSYS Simulation
468(4)
S.N. Wu
Z.H. Yang
G.Z. Dai
Z.J. Zhang
L. Zhang
L.X. Dong
L.L. Liu
F. He
Investigation on the Key Technologies of Mechanical Expanding of Large Diameter LSAW Pipe
472(6)
S.H. Xiao
C.L. Zha
Shrinkage Optimization of Flat Receptacle Using the Finite Element Method
478(5)
Z.Y. Xu
Y. Wang
P.L. Dong
K. Xiao
Numerical Simulation of Wire-Rod Hot Continuous Rolling Process with Multi-Field Coupling
483(6)
L.C. Yang
J.X. Hu
L.W. Ning
Y.C. Liu
Investigation of Relationship between Material Flow Direction, and Local Stress Field in Plastic Deformation
489(6)
J. Zhang
Z.B. He
S.J. Yuan
Heat-Stress Fields Numerical Simulation of Aluminum Profile Extrusion by Porthole Die
495(7)
J. Zhang
Y.T. Li
L. Chu
D.S. Bi
H.X. Cui
A Mathmatical Approach for Modeling Real Hot Forming Process Using Physical Simulation Results
502(6)
S.H. Zhang
H.W. Song
M. Cheng
Z.T. Wang
Elasto-Plastic Dynamic Explicit Analysis of Cold Ring Rolling Process
508(9)
X.B. Zhang
Z.G. Li
Y.Q. Liu
M.H. Wu
Numerical Simulation Analysis on Cold Closed-Die Forging of Differential Satellite Gear in Car
517(8)
Y.Z. Zhang
J.B. Huang
X. Lin
Q.S. Fang
Fast Prediction of Springback at Product Design Stage for Sheet Metal Forming
525(7)
Z.B. Zhang
Y.Q. Liu
T. Du
Z.G. Li
3D Thermal Mechanical Coupled Elasto-Plastic Finite Element Analysis in the Whole Rolling Process of H-Beam
532(7)
G.M. Zhu
Y.L. Kang
W. Chen
G.T. Ma
Modeling Stress Strain Curves for Nonlinear Analysis
539(6)
H.S. Gao
Rheological Models as the Basic Element of Metal Forming Processes Simulation
545(4)
O.M. Smirnov
M.A. Tsepin
Deforming Mechanisms of Two-Pass Drawing Process of an Aluminum Tube from Circular to Rectangle Section
549(6)
G.Z. Quan
M.H. Wang
J. Zhou
Y. Tong
Investigation of the Billet Deformation Process in the Dies with Elastic Elements Realizing a Cross and a Longitudinal Shear
555(5)
A.B. Naizabekov
S.N. Lezhnev
Numerical Simulation on Pharmaceutical Powder Compaction
560(6)
L.H. Han
J. Elliott
S. Best
R. Cameron
A.C. Bentham
A. Mills
G.E. Amidon
B.C. Hancock
The Establishment of Mathematics Model of Velocity Field in Strip Cast-Rolling Deforment Area
566(6)
B.Y. Sun
S.J. Yuan
Numerical Simulation on Laser Peen Forming of Sheet Metal
572(7)
J.Z. Zhou
Y.J. Fan
S. Huang
S.Q. Jiang
J.J. Du
A 3D Rigid-Plastic FEM Simulation on Radius of Incremental In-Plane Bending of Strip Metal
579(5)
W.T. Tang
L. Jin
J. Zhang
H. Yang
Prediction of Rolling Force during Temper Rolling
584(5)
J. Larkiola
J. Nylander
V. Kahkonen
M. Judin
The Innovative Production Developments in Sheet Hydroforming
589(6)
L.H. Lang
H.L. Li
X.B. Zhou
J. Danckert
Y.L. Ghen
Research on Simulating of Controlled Rolling, and Controlled Cooling Process for Mo Micro-Alloy Steel
595(5)
G.Y. Li
B.C. Zhao
Z.F. Pang
Y.H. Liu
H.X. Ma
Application Research on Expert System of Incremental In-Plane Bending
600(6)
W.T. Tang
C.L. Tang
L. Huang
H. Yang
Deformation Pattern of the Large Generator's Retaining Rings during Hydraulic Bulging Strengthening
606(6)
W.W. He
J.S. Liu
H.G. Guo
J.K. Chen
Density Functional Theory Applying in the Computation to the Properties of Copper Surface
612(4)
H.T. Cheng
J.G. Yang
H.Y. Fang
Finite Element Simulation for Evolutions of Profiles during Hot Compression
616(6)
B.H. Tian
S. Kleber
V. Wieser
Simulation of Internal Stress in Injection Molded Parts
622(5)
H.H. Wu
Z.F. Zhao
C.Y. Shen
A Study of the Microstructure and Grain Size at the Welding Heat Affected Zone of a Ferrite Stainless Steel
627(6)
S.X. Zhang
S.K. Guan
X.T. Liu
C.L. Mo
Study on Temperature Distribution of Plasma Surface Alloying Furnace
633(6)
Z.H. Li
S.S. Liu
Z.Y. Cheng
Reliability Calculation of Welded Pressure Pipe with Circumferential Crack Based on 3-D Elastic-Plastic SFEM
639(4)
B.L. He
Y.X. Yu
L.X. Huo
Y.F. Zhang
Numerical Simulation of Basal Parameters for Fatigue Evaluation of Electromotor Rotor Welded Structure
643(6)
Z.L. Zhao
J.G. Yang
X.S. Liu
H.Y. Fang
Numerical Simulation of Temperature Field and Stress Field of Electron Beam Brazing Stainless Steel Radiator
649(5)
J.M. Li
F.R. Chen
The Research of a Pulse Laser Powder Materials' Sintering Process
654(6)
A. Saprykin
N. Saprykina
O. Krovina
Numerical Simulation on Temperature Field of Electron Beam Welding of Magnesium Alloy and Study on Properties and Microstructure of Joint
660(6)
H. Ye
Y. Luo
Z.L. Yan
B. Shen
Numerical Simulation of Residual Stress in the Glass-to-Metal Diffusion Seals
666(6)
D. Xu
X. Ling
Investigation of the Influence of Shot Peening on Stress Corrosion Cracking of Stainless Steel Welded Joints
672(6)
X. Ling
H.F. Ni
G. Ma
Numerical Simulation of Laser Surface Micro-Texturing
678(6)
H.X. Liu
Y.X. Chen
X. Wang
X.X. Meng
Y.H. Fu
L. Cai
Analysis and Evaluation for Usability of the Low Hydrogen Type Structural Steel Covered Electrode
684(6)
Y. Wang
B. Wang
J.H. Gao
Investigation on M-A Constituent in Weld CGHAZ of High-Strength Microalloyed Steel
690(6)
C.X. Chen
W.S. Li
H.F. Peng
FE Simulation of Complex Contour Forming of Sheet Metals Based on Laser Bending
696(6)
Y.B. Chen
J.Z. Zhou
S. Huang
Y.Q. Sun
Numerical Analysis on Temperature Field of Axial Alternating Magnetic Field-Assisted Electric Field-Activated Sintering
702(7)
L. Guo
Y.Y. Li
X.Q. Li
J.Y. Yang
Investigation on the Simulation System of GTAW Operation Based on Virtual Reality Technology
709(7)
Z.X. Liang
J.X. Zhang
Y. Pei
Numerical Simulation and Analysis of Flow Field in TIG Arc Brazed Filler Metal Droplet
716(6)
R.F. Li
Z.S. Yu
K. Qi
Quality Measure and Control System for the Whole Process of Arc Welding
722(6)
Z.Y. Li
B. Wang
J.B. Ding
Research on One New Type of Rapid Prototyping Based on Laser-Induced Chemical Liquid Deposition
728(7)
D.L. Song
D.F. Zhao
K.R. Chen
X.P. Yao
W.C. Chen
Simplified Heat Model of the Weaving Welding Processes
735(6)
J.G. Yang
J.S. Gao
H.Y. Fang
G.T. Zhou
J.F. Hu
Grain Refinement Behavior of Pipeline Steel in Welding Heat Affected Zone
741(6)
S.F. Yu
Y. Lei
Z.Y. Li
Numerical Simulation of Welding Residual Stress and Post-Weld Heat Treatment for Dissimilar Steel Welded Joint
747(6)
G.D. Zhang
C.Y. Zhou
PART 2
The Electrical Contact Resistance in Resistance Welding Evaluated by Gleeble Testing Machine
753(4)
W.M. Zhou
Numerical Modeling of High Power MAG Welding on the Plate
757(6)
J. Huang
F.W. Bach
D. Windelberg
Analysis of Arc Welded Thin-Walled Cylinders to Investigate the Effects of Welding Process Parameters on Residual Stresses
763(6)
A.M. Malik
E.M. Qureshi
N.U. Dar
Optimization of Welding Process Parameters for Rotating Arc Welding Sensor Based on Genetic Algorithm
769(5)
J.P. Jia
H. Zhang
H. Huang
Numerical Simulation on Temperature Field in Laser Welding for Aluminum Alloy with Different Thickness
774(6)
Y.S. Rong
X.J. Hui
F. Ding
Evaluation of Corrosion Property for Repair Welding Zone of Exhaust Valve
780(6)
K.M. Moon
H.R. Cho
M.H. Lee
Y.H. Kim
Numerical Simulation of Pulsed Arc Welding by Melting Electrode
786(6)
O.I. Shpigunova
A.A. Glazunov
Numerical Simulation of Hydrostatic Extruding Cu/Al Bimetal Clad through Equal-Strain Contour Concave Die
792(7)
C.H. Zhang
Y. Liang
F.C. Wang
A Study on Numerical Analysis and Residual Stress Evaluation of Welded Joint
799(6)
S.C. Huh
Overview of Modeling Strength Evolution during Friction Stir Welding
805(6)
J.H. Cho
H.W. Kim
S.B. Kang
Numerical Computation of a Linear Friction Welding Process
811(5)
J. Tao
T.C. Zhang
P.T. Liu
J. Li
Y. Mang
The Simulation of Residual Stress for Stud Welding and Establishment of Strength Estimating Model
816(5)
G.T. Zhou
X.S. Liu
G.L. Liang
P.Z. Liu
D.J. Yan
H.Y. Fang
The Application of Welding Heat Cycle Computer Software
821(6)
Y.Y. Feng
Z.A. Luo
D.H. Zhang
J. Wei
L.J. Wang
NiCr Alloy Coating Deposited on the Surface of 35CrMo Steel by the Electrospark Process
827(6)
H. Yu
H.X. Shi
Y.L. Wang
K.K. Zhang
W.Y. Wang
L.J. Han
Q.H. Pang
Computer Simulation of Thermo-Mechanical Processes at Fusion Welding of Alloyed Steels
833(4)
D.A. Chinakhov
E.P. Agrenich
Gas Tungsten Arc Welding and Hybrid Laser-TIG Welding Temperature Field Analysis of AZ31B Magnesium Alloy
837(6)
G.L. Liang
S.Q. Yuan
G.T. Zhou
X.D. Sun
Y. Mang
Study on Computer Emulation of PTFE's Wearability Improvement by Al3+ Ion Implantation
843(5)
J.P. Shao
H. Tang
Y.Q. Zhang
Influence of Temperature on Field-Induced Reorientation Strain in Magnetic Shape Memory Alloy
848(6)
Y.P. Zhu
G.S. Dui
Application and Research of Numerical Simulation for Rubber Like Material with MSC.Marc
854(5)
J.B. Sang
B. Liu
Z.L. Wang
S.F. Xing
J. Chen
Optimization Design for the Interface Modulus of Csf/Al Composite
859(5)
G.X. Tang
G.A. Zhang
H.B. Wu
W.T. Tian
H. Guo
A Study of the Environment-Friendly Chrome-Free Chemical Conversion Coating on 2024 Aluminium Alloy
864(5)
D.C. Chen
W.H. Gong
Z.Z. Huang
W.F. Li
Numerical Simulation of Interfacial Bonding Degradation of Composites under Two-Stage Loading
869(6)
Y.H. Chen
Q.J. Zhu
Study on the Freeze-to-Crack Test of Asphalt Modified by Waste-PE in Packing
875(6)
C.Q. Fang
T.H. Li
D.Q. Jing
Y.B. Ji
Mullite Interlayer of C/Si-C-N Composites Fabricated by PIP
881(5)
G.F. Lu
S.R. Qiao
J.T. Hou
M.F. Gong
Numerical Simulation of Thermal Induced Crack Propagation in Laminated Composites
886(6)
T. Xu
J.Y. Yang
C.A. Tang
S.B. Tang
Modified Tartagli Method for Calculation of Jominy Hardenability Curve
892(6)
W. Sitek
J. Trzaska
L.A. Dobrzanski
Study on Deformation Induced Ferrite Transformation in Mild Steels with or without Niobium
898(6)
L.J. Wang
L.D. Yao
H.P. Ren
C.M. Liu
Determination of the Kinetics for Dynamic and Static Recrystallization by Using the Flow Curves
904(6)
J. Wang
H. Xiao
Microstructures and Toughness in Simulated Coarse Grain Heat-Affected Zones of Copper-Bearing Steel
910(5)
W.Y. Liu
L. Wang
J.B. Liu
P.H. Li
K. Miao
R.D. Han
Structure Optimization in the Stacked Package of IC Microstructures
915(4)
H.P. Li
Y.T. He
H.X. Zhang
R.H. Cui
Influence of Delamination of Epoxy/Dielectric Interfaces on Pattern Shift and Passivation Cracking under Aeronautical Conditions
919(5)
Y.T. He
H.P. Li
R.H. Cui
C.H. Fan
(225)A Martensite Transformation, and Kurdjumow-Sachs Mechanism
924(6)
C.Q. Xu
X.M. Cao
G.J. Li
Numerical Modeling of the Electrical Resistivity of Carbon Black Filled Rubber
930(5)
Z.M. Xie
Y.J. Yum
H.G. Min
J.H. Son
Numerical Simulation of Thermal Stress Fields during Gas Quenching
935(6)
Z.L. Li
H.M. Cheng
J.R. Chen
M.H. Liu
Effects of Thermal Treatment on the Morphology and Properties of CSM/Poly(Urethane-Isocyanurate) Composites Formed by SRIM Process
941(6)
H.Y. Tang
J.H. Wang
G.Q. Gao
W.X. Chen
High Temperature Mechanical Behavior of 16Mnq under Constant Constraint Conditions
947(6)
Y. Gao
P. Zeng
Phase Formation and Structure of Mullite-Alumina-Zirconia and Spinel-Enstatite Ceramics Developed from Synthetic and Mineral Raw Materials
953(6)
G.M. Sedmale
I. Sperberga
A. Hmelov
U. Sedmalis
A. Actins
Mechanical and Processing Characterisation of Effective Behaviour of Wood-Plastic Composites by Analytical and Numerical Simulation
959(13)
A. Hancic
K. Kuzman
F. Kosel
A. Glojek
A.M. Cunha
G. Gantar
The In Situ Study on the Micro-Structural Characters of IF Steel at Early Stage of Recrystallization Using High-Energy X-Ray
972(6)
T. He
Y.D. Liu
Q.W. Jiang
Y. Ren
G. Wang
Y.D. Wang
X. Zhao
L. Zuo
Topology Optimization of Orthotropic Material Structure
978(12)
H.P. Jia
C.D. Jiang
G.P. Li
R.Q. Mu
B. Liu
C.B. Jiang
Investigating the Mechanical Property and Rolling Contact Fatigue Life of Diamond-Like Carbon Films on Bearing Steel
990(6)
H.X. Liu
Y.H. Jiang
R. Zhou
Z.L. Li
B.Y. Tang
Finite-Element Analysis of Thermal Stresses in Diamond Film Deposition on Mo Substrate with Ti Interlayer
996(6)
Z. Liu
C.M. Li
D.C. Niu
H. Lan
W.Z. Tang
G.C. Chen
J.H. Song
Y.M. Long
F.X. Lu
Application of Physical Simulation for Developing New Steel Types
1002(6)
L.P. Karjalainen
M.C. Somani
A.S. Hamada
Dislocation Distribution Function of Two Fracture Dynamics Problems Concerning Aluminum Alloys
1008(5)
N.C. Lu
Y.H. Cheng
J. Cheng
Y.L. Chen
A New Optimization Algorithm for Inverse Analysis to Material Parameters
1013(7)
Y.H. Lu
S.L. Wang
H. Jiang
Nonlinear Bending of the FGM Circular Plates with Temperature-Dependent Properties
1020(5)
L.S. Ma
C.Z. Deng
Z.Y. Ou
Influence of Ceramic Aggregate on the Microstructure of Filtration Materials
1025(6)
X.E. Ma
H. Guo
Y.G. Li
The Effect of Nonequilibrium Structure State on the Creep and Superplastic Behaviour of Materials
1031(7)
M.M. Myshlyaev
Research on the Accurate Control of Initial and Finishing Cooling Temperatures for X70 Pipeline Steels
1038(6)
T. Niu
H. Yu
Y.L. Kang
M.J. Long
Residual Stresses of Fiber-Reinforced Functionally Graded Composites
1044(6)
Z.Y. Ou
D.X. Lei
L.S. Ma
Research on Creep Constitutive Model of TC11 Titanium Alloy Based on RBFNN
1050(6)
X.H. Peng
Y.S. Luo
J.Y. Zhou
M. Yu
T. Luo
Hot Ductility of Fe-18Cr-12Mn-0.55N High Nitrogen Austenific Stainless Steel
1056(6)
F. Shi
L.J. Wang
W.F. Cui
Z.B. Li
M.Z. Xu
C.M. Liu
Simulation of Intercritical Austenization of a C-Mn Cold Rolled Dual Phase Steel
1062(8)
S. Kuang
Y.L. Kang
H. Yu
R.D. Liu
Research on Heat Treatment Techniques and Structure Properties of CuNi2TiCrZr Alloy
1070(6)
Y.S. Xu
X.L. Wang
Effect of Molybdenum on Hot Deformation and Processing Maps of Austenitic Stainless Steels
1076(7)
M.J. Wang
S.S. Long
S.M. Mu
Y. Wang
L. Chen
Physical Simulation of Dynamic Recrystallization Behavior of 7050 Aluminum Alloy
1083(3)
Y.P. Yi
Y. Shi
Study on Preparation of Ti Powder by Self-Propagating High-Temperature Synthesis (SHS) with Magnesiothermit Reductive Process
1086(7)
P.L. Zhang
T.D. Xia
G.D. Zhang
L.J. Yan
Effect of Zinc Content on the Ageing Behavior of Al-Zn-Mg-Cu-Li Alloys
1093(4)
Z.K. Zhao
Q.Z. Sun
P.Q. Zhang
C.L. Li
X.J. Wang
C.Q. Chen
Effects of Gas Multicomponent Thermochemical Treatment Process on Structure and Properties of Steel 20
1097(4)
H. Zhou
F. Chen
Y.G. Yang
H.C. Wan
J.Q. Chen
B. Yao
M. Xi
Study on High Temperature Mechanical Properties of Bearing Steel GCr15
1101(5)
L.G. Zhu
W.G. Lu
Y.H. Han
Predicting Modulus of Elasticity for Wood-Based Composites
1106(5)
Y.C. Hu
Amorphous Compositions for Production of Thick Films
1111(6)
J. Setina
V. Akishins
Achieving the Dual Phase Structure in Low Alloyed Steel with Slow Cooling Rate
1117(6)
T. Jappinen
S. Kivivuori
Influence of High Shearing Stress-Induced Strengthen Effect on GF/HDPE Composites
1123(6)
G.Z. Dai
X.F. Zhou
L.X. Dong
S.N. Wu
L.L. Liu
Q.Q. Ni
Computer Simulation of Heat Treatment Process for 125MN Plunger
1129(5)
C.L. Mo
J. Ling
Y.K. Luan
C.P. Shen
Simulation of the Processes of Aluminum Alloys Preforms and Semifinished Products Manufacture under Influence of Technological Heredity and Phase Transitions
1134(5)
N.L. Lisunets
O.M. Smirnov
M.A. Tsepin
Finite Element Simulation for Forging Process Using Euler's Fixed Meshing Method
1139(6)
C.C. Wang
Research on the Mechanisms of Laser Forming for the Micro-Structural Element
1145(6)
Y. Jin
J.H. Wu
Y.J. Shi
H. Shen
Z.Q. Yao
Application of Time-Ageing Time and Time-Temperature-Stress Equivalence to Nonlinear Creep of Polymeric Materials
1151(6)
R.G. Zhao
W.B. Luo
Q.F. Li
C.Z. Chen
The Influence of Temperature on Cr-Ti Coating in Carbon Steel
1157(5)
B.Y. Lou
K.C. Luo
B. Xu
A Study on Fatigue Crack Propagation Properties Using the X-Ray Diffraction Method
1162(8)
M.A. Hossian
M.B. Lim
S.C. Huh
W.J. Park
A Study on Tribology Characteristics of SM53C by High Frequency Heat Treatment
1170(7)
T.H. Song
K.Y. Lee
S.C. Huh
W.J. Park
The Austenite Inverse Phase Transformation Quenching in Zero Time Holding of 20MnV Steel
1177(7)
A.M. Li
X.J. Wang
L.J. Huang
Comparison of Microstructural Aspects by Electron Microscopy Observed in Al-Mg Based Alloys Obtained by Conventional and P/M Processes After Thermomechanical Treatments
1184(6)
W.A. Monteiro
S.J. Buso
A. Almeida Filho
R.B. Ferrari
The Corrosion Behaviors of Heat-Treated SAE 8620 Steels
1190(9)
S. Hong
H.C. Lin
Y. Lee
T.S. Lian
L.Y. Tseng
K.M. Lin
Displacement Field Simulation and Deformation Prediction of Longitudinal Straight Seam Welding of Thin-Wall Aluminium Alloys Cylinder
1199(5)
G.T. Zhou
X.S. Liu
D.J. Yan
H.Y. Fang
Simulation of Mold Filling and Solidification on Gravity Casting of Al-Si Alloy (A357)
1204(6)
G.F. Mi
H.T. Zhao
K.F. Wang
Z.A. Xu
J.T. Niu
A Study on Constitutive Model and Parameters of Rock Slope Stability
1210(7)
Z.X. Yan
J. Duan
P. Jiang
H.Y. Wang
Analysis and Simulation of Sensor Structure Parameters and Filling Materials Characteristics for Electrical Capacitance Tomography System
1217(5)
D.Y. Chen
L.L. Wang
Y. Chen
Pad Effects on Slurry Flows in CMP System
1222(6)
C.H. Zhang
J.Q. Zhang
Dynamic Characteristic Analysis of the Micropump Considering the Diaphragm Stiffness
1228(6)
D. Jiang
S.J. Li
G. Bao
Numerical Simulation of Gas-Solid Flow in a Precalciner of Cement Industry
1234(6)
J.L. Xie
S.X. Mei
Thermodynamic Analysis of Friction Pairs inside a High Temperature Flow Rate Control Valve for Scramjet Engines
1240(6)
S.J. Li
Z.W. Zang
Y.H. Li
W. Bao
Application of RFPA2D in Sublevel Caving Mining Extra-Thick Coal Seams
1246(6)
H. Nan
T. Xu
Z.D. Wei
The Fabrication of 2-D Global Fiducial Grid with High Resolution for Spatial Phase Locked e-Beam Lithography
1252(6)
J.F. Dai
Q. Wang
W.X. Li
Y.F. Cui
F. Zhang
H.I. Smith
Analyses of the Influencing Factors of Rotating Impeller Degassing Process and Water Simulation Experiment
1258(8)
G.F. Mi
X.Y. Liu
K.F. Wang
S.P. Qi
H.W. Wang
J.T. Niu
Modelling Fabric's Optical Behaviors
1266(6)
H.Y. Yang
S.K. Zhu
K.J. Li
N. Pan
Study on Medicinal Properties of Red 1%NaOH Extractives of Castanopsis Fissa Wood by GC/MS
1272(4)
Z.F. Zhang
W.X. Peng
K.F. Li
Q.Z. Ma
The Effects of Substrate Temperature on the Residual Stress for EBPVD TBCs
1276(5)
Y.S. Zhong
L.P. Shi
J. Yu
X.D. He
Study on Temperature Distribution in Double Glow Discharge Zone
1281(6)
P.Z. Zhang
Z.Y. He
G.H. Zhang
X.F. Rong
H.Y. Wu
Z. Xu
Stability Analysis of Diversion Tunnels in Jinping II Hydropower Station Project
1287(6)
C.Q. Zhang
X.T. Feng
H. Zhou
S.L. Huang
Q. Jiang
Study on Method of the Multi Control Task and Synchronized Data Acquisition of the Themomechanical Simulator
1293(6)
H.L. Su
Z.A. Luo
J. Wei
D.H. Zhang
L.J. Wang
Analysis and Experiments of Eddy Current Brakes with Moving Magnets
1299(6)
J.K. Shiau
D.M. Ma
M. Jou
Flashover Condition Analysis on Passenger Carriage Fire by Using Swallowtail Catastrophe Theory
1305(9)
B. Lei
G.Z. Dai
Q.Y. Wang
Numerical Simulation of Temperature Distribution in Conductive Asphalt Solar Collector due to Pavement Material Parameters
1314(6)
S.P. Wu
B. Li
H. Wang
J. Qiu
Study on Healthful Function of Superheated Water Extractives of Phyllostachys Heterocycla by GC/MS
1320(5)
Q.Z. Ma
W.X. Peng
D.Q. Zhang
Q.M. Liu
Y.Q. Wu
Determination of Chemical Components of Red 1%NaOH Extractives of E. Urograndis Wood by GC-MS
1325(4)
W.X. Peng
K.F. Li
D.Q. Zhang
Y.Q. Wu
An Abrasive Wear Model of Interpenetrating Composites
1329(6)
S.R. Wang
P.Q. Guo
H.Y. Wang
M. Wang
The Effect of Temperature and Content of Conductive Filler on the Conductivity of Conductive Rubber
1335(3)
T.T. Wang
Y.G. Zhang
L.F. Yang
J.C. Zhang
S.M. Liu
Study of Electroplating Zn-Sn-Ni Alloy
1338(5)
Z. Wang
M.Z. An
J. Yu
X.R. Hu
The Influence of Surveying Method on Mechanical-Electrical Properties of Smart Mortar
1343(5)
R. Yao
Y.B. Zhang
Z.C. Wang
Calculation on Temperature Rise of CMP Process: Roughness Effects Considered
1348(6)
W. Ye
C.H. Zhang
Weight Calculation of Steel Pipe by Visual Basic Programme
1354(4)
Y.W. Zhang
J.H. Wang
Y.D. Ji
Research on the Proper Selection of Soil Constitutive Relation in Modeling Underground Excavation
1358(6)
Y.T. Zhang
L.J. Tao
S.H. Tang
B. Sun
Research on Hydrogen Induced Cracking of 08Cr2AlMo Steel Based on the Empirical Electron Theory
1364(6)
B.Q. Gu
Y.F. Zhang
Y. Ding
A FEM Study on Chip Formation in Orthogonal Turning Nickel-Based Superalloy GH80A
1370(6)
J.L. Li
G. Liu
D.J. Zhang
M. Chen
Numerical Analysis of Electromagnetic Field of Solid Rotor Asynchronous Permanent Magnetic Coupling by Finite Element Method
1376(6)
C.J. Yang
Q.W. Li
H.L. Ma
S.F. Jiang
Comparison between Plasma-MIG and MIG Procedures on 5A06 Aluminum Alloy
1382(7)
H.M. Gao
Y. Bai
L. Wu
Numerical Simulation for Low Pressure Die Casting of Al-Alloy Motor Enclosure, and Technology Improvement
1389(7)
G.F. Mi
X.Y. Liu
K.F. Wang
J.T. Niu
Investigation of Forming Conditions on Microstructure Development and Mechanical Stability of Trip Steel
1396(6)
J. Zrnik
O. Murnsky
P. Hornak
M. Fujda
Analysis of Worm Cutting Characteristics in Whirling Process
1402(5)
Y.M. Lee
W.S. Choi
J.H. Son
K.J. Oh
S.I. Kim
G.W. Park
H.C. Jung
Analysis on Section Effect of Heavy Plate by Finite Element Method during Controlled Cooling
1407(7)
N. Li
C.F. Yang
T. Pan
Effects of Vanadium and Rare-Earth on Carbides and Properties of High Chromium Cast Iron
1414(8)
W.M. Zhao
Z.X. Liu
Z.L. Ju
B. Liao
X.G. Chen
The Multi Physical Fields Modeling for 7B50 Aluminum Alloy Semi-Continuous Casting Process
1422(6)
S.C. Hu
W.C. Ma
X.Q. Li
J. Zhong
Development and Application of Experimental Facilities for Steel Forming
1428(5)
Z.A. Luo
G.D. Wang
X.H. Liu
J.P. Li
L.J. Wang
F.A. Hua
The Multi-Scale FEM Simulation of Wire Fracture during Drawing of Perlitic Steel
1433(6)
A. Milenin
Z. Muskalski
P. Kustra
Research and Simulation of Influence of Different Pressing Velocity on Powder Metallurgic Products Properties
1439(6)
M.H. Jiao
D.G. Wang
T. Xie
J.W. Yu
Y.G. Yin
Y.C. Wu
Impact of Rolling Conditions on Propagation of a Potential Crack
1445(6)
R. Fabik
J. Kliber
S. Aksenov
Applications of Dyes in Material Science Research
1451(4)
Z.Y. Cao
F. Zhao
X.Y. Li
Finite Element Analysis on Microstructure Evolution of Hot Ring Rolling Process
1455(6)
Z.C. Sun
H. Yang
X.Z. Ou
Finite Element Analysis of the Rolling Contact Fatigue Life of Railcar Wheels
1461(6)
B.C. Goo
J.W. Seo
Effect of Scanning Frequency on Temperature Distribution
1467(4)
Y.S. Wang
J.J. Wang
X.C. Yang
Study on One Kind of Antenna Radomes Materials Numerical Algorithm Simulation Based on DBEM
1471(6)
Y.W. Fang
Y. Wang
Diffusion Interaction between Two Metals, One of Which is in Liquid State
1477(6)
A.P. Savitskii
The Study of Thermal Boundary Condition for CFRP Pressure Vessel with Metallic Liner during Manufacture Process
1483(6)
Z.H. Hu
R.G. Wang
L. Ma
S.Y. Du
Numerical Simulation of Process of Cavity Filling and Solidifying in TiAI Alloy Investment Casting
1489(6)
Y.L. Guo
S.L. Xiao
L.J. Xu
Author Index 1495(8)
Keyword Index 1503