Proceedings of the International Congress on Ceramics V [Mīkstie vāki]

Preface, Conference Organization and Sponsors
A Transparent and Tough -Si3N4 Ceramic with a Whiskery Microstructure
Fabrication and Property of Porous Silicon Nitride Ceramics with Y2O3-Yb2O3
Additions
Effect of -Si3N4 Powder on Thermal Conductivity of Silicon Nitride Ceramics
Effect of Milling Parameters on Microstructure and Selected Mechanical
Properties of Si3N4 Graphene Composites
Effect of Y2O3 on Microstructure and Properties of cBN/SiAlON Composite
Friction and Wear Behavior of Pressureless Solid State Sintered SiC
The Influence of Sintering Temperature on Properties of Silicon Carbide
Porous Ceramic Filter Membrane
Preparation and Properties of Silicon Carbide Porous Ceramic Filter Membrane
Effect of Co Content on the Densification, Microstructure and Mechanical
Properties of cBN-WC/Co Composites
Microstructure and Properties of Hot-Pressing Sintered Tungsten Carbide
Composites by Adding Cubic Boron Nitride
Microstructures and Properties of B4C-Based Composites with Laminar
Structure
Influence of YAG-Based Composite Sintering Aids on Gas Pressure Sintered
BNw/Si3N4 Composites
Effect of Carbon Black Content and Molding Pressure on the Thermal
Conductivity of SiC/Si Ceramic Composites
Analysis of the Mechanisms of Cracking Selected Transition Metal Carbides
Sintering of Ti3SiC2 Ceramics by Hot Press from Commercial Powders
Wetting Behaviors of Pure Nickel and Nickel-Based Alloys on Sintered ZrB2-SiC
Ceramics
Preparation and Thermal Properties of Pressureless Sintered AIN/SiC
Composites
Interface of Graphene/ZrB2 Ceramics Structure by Molecular Dynamics
Simulation
Characterization of Metal-Like Carbides-Graphene Composite Prepared by SPS
Method
Study on Thermal Shock Resistance of Alumina Composite Ceramics by Indention
Quenching Method
Effects of Pore Former on Properties of Alumina Porous Ceramic for
Application in Micro-Filtration Membrane Supports
The Formation of Alumina Ceramic Microspheres by Internal Gelation Process
Preparation and Characterization of Al2O3-Based Composite Membranes by
Sol-Gel Method
Effects of Sintering Temperature and Porogen Addition on Properties of Low
Cost Porous Mullite Ceramics
Contrast Investigation on Relative Translucency of Four Ultra-Transparent
Dental Zirconia Materials after Veneered
Effect of Background Color to the Final Color of Four Highly Transparent
Ceramics after Veneered
PEO Ceramic Coating on Mg-10%wt. Zn for Potential Biological Application
Dielectric Breakdown in Electrowetting-Based Liquid Microactuators
Effects of Zr/Ti Ratio on the Electric-Induced Light Scattering Performances
of PLZT Transparent Ceramics
Effect of Sintering Temperature on Structure and Electric Properties of
(Ba0.96Ca0.04)(Zr0.05Ti0.95)O3 Ceramics
Characterizations of (Mn, Sb) Co-Tuned PZMNS-PZT Piezoelectric Ceramics in
the Morphotropic Phase Boundary and their Applications on Multi-Bulk
Step-Down Piezoelectric Transformers
Ceramic-Polymer Composites with Low Dielectric Loss for Microwave Antennas
and Wireless Sensors
Preparation and Ferroelectric Properties of BaTiO3 Nanotubes
Li2ZnTi3O8 Microwave Dielectric Ceramics Prepared by the Reaction-Sintering
Process
Leakage Current Characterization of BaTi2O5 Nanowires
Preparation and High-Frequency Dielectric Properties of Cu/SiO2 Composites
Magnetic Properties of Barium Ferrite Prepared by Hydrothermal Synthesis
Electromagnetic Property of La0.7Sr0.3MnO3/Ag Composite at High Frequency
Photoswitching Characteristics of LiNbO3/ZnO/n-Si Heterojunction
Luminescent Properties of Polycrystalline Cerium-Doped Lutetium Pyrosilicate
Powders
Effect of Annealing Treatments on Optical and Luminescence Properties of
Lu1.8Y0.2SiO5:Ce Single Crystal
Molten Salt Synthesis of SnS2 Nanoparticles with Visible-Light Driven
Photocatalytic Activity for the Degradation of Rhodamine B
Spray Pyrolysis Synthesis and Luminescence Properties of Spherical Eu3+ Doped
SrMoO4 Phosphors
Synthesis and Characterization of Yellow Pigments Fabricated by Sol-Gel and
Solid-State Reaction Routes
Effect of Technological Conditions on (Na0.4Li0.6)CrSi2O6 Emerald Green
Ceramic Pigments
Particle Size and Chroma Control of CoAl2O4 Pigment
Synthesis of Ytterbium Sulfides by the Sulfurization and Heat Treatment
Effects of Ni Sheath on the Microstructure and Properties of BSCCO-2223
Tapes
Synergistic Effect of K2O and Al2O3 onthe Crystallization and Structure of
Na2O-CaO-SiO2-MgO-Al2O3-ZnO of Glass-Ceramics
Synthesis of Nb2AlC Material by High Temperature Solid State Reaction Method
Processing of High-Quartz Porcelain Tile with Large Yellow Sand

In Situ Solidification Formation of the Architectural Ceramics
Body with Full Barren Materials
Effects of Processing Condition on the Properties of Porcelain Building
Ceramic Tiles
Effects of CaO-Li2O-K2O-Na2O Fluxing Agents on the Properties of Porcelain
Ceramic Tiles
The Use of Correlation and Frequency Analysis for Detection of Deformation in
7050 Aluminum Beams
The Influence of Synthesis Conditions on the Structure of Mg-Al Layered
Double Hydroxide