Atjaunināt sīkdatņu piekrišanu

Routing and Switching Essentials v6 Course Booklet [Mīkstie vāki]

2.00/5 (2 ratings by Goodreads)
  • Formāts: Paperback / softback, 272 pages, height x width x depth: 275x220x10 mm, weight: 642 g
  • Sērija : Course Booklets
  • Izdošanas datums: 16-Dec-2016
  • Izdevniecība: Cisco Press
  • ISBN-10: 1587134276
  • ISBN-13: 9781587134272
Citas grāmatas par šo tēmu:
  • Mīkstie vāki
  • Cena: 40,55 €
  • Grāmatu piegādes laiks ir 3-4 nedēļas, ja grāmata ir uz vietas izdevniecības noliktavā. Ja izdevējam nepieciešams publicēt jaunu tirāžu, grāmatas piegāde var aizkavēties.
  • Daudzums:
  • Ielikt grozā
  • Piegādes laiks - 4-6 nedēļas
  • Pievienot vēlmju sarakstam
Routing and Switching Essentials v6 Course BookletPalielināt
  • Formāts: Paperback / softback, 272 pages, height x width x depth: 275x220x10 mm, weight: 642 g
  • Sērija : Course Booklets
  • Izdošanas datums: 16-Dec-2016
  • Izdevniecība: Cisco Press
  • ISBN-10: 1587134276
  • ISBN-13: 9781587134272
Citas grāmatas par šo tēmu:
Permanent link: https://www.kriso.lv/db/9781587134272.html
Keywords:
Routing and Switching Essentials v6 Course Booklet



Your Cisco Networking Academy Course Booklet is designed as a study resource you can easily read, highlight, and review on the go, wherever the Internet is not available or practical:

· The text is extracted directly, word-for-word, from the online course so you can highlight important points and take notes in the Your Chapter Notes section.

· Headings with the exact page correlations provide a quick reference to the online course for your classroom discussions and exam preparation.

· An icon system directs you to the online curriculum to take full advantage of the images embedded within the Networking Academy online course interface and reminds you to do the labs, interactive activities, packet tracer activities, watch videos, and take the chapter quizzes.

The Course Booklet is a basic, economical paper-based resource to help you succeed with the Cisco Networking Academy online course.

Related titles:

Routing and Switching Essentials v6 Companion Guide

book: 978-1-58713-428-9

eBook: 978-0-13-466965-6

Routing & Switching Essentials v6 Labs & Study Guide

book: 978-1-58713-426-5

CCNA Routing and Switching Portable Command Guide, Fourth Edition

book: 978-1-58720-588-0

eBook: 978-0-13-446617-0
Chapter 0 Course Introduction 1(4)
0.0 Welcome to Routing and Switching Essentials
1(3)
0.0.1 Message to the Student
1(4)
0.0.1.1 Welcome
1(1)
0.0.1.2 A Global Community
1(1)
0.0.1.3 More Than Just Information I
0.0.1.4 How We Teach
2(1)
0.0.1.5 Practice Leads to Mastery
2(1)
0.0.1.6 Mind Wide Open
2(1)
0.0.1.7 Engineering Journals
2(1)
0.0.1.8 Explore the World of Networking
2(1)
0.0.1.9 Create Your Own Worlds
2(1)
0.0.1.10 How Packet Tracer Helps Master Concepts
3(1)
0.0.1.11 Course Overview
3(1)
Quiz
4(1)
Exam
4(1)
Your
Chapter Notes
4(1)
Chapter 1 Routing Concepts 5(30)
1.0 Introduction
5(1)
1.0.1.1 Routing Concepts
5(1)
1.0.1.2 Activity - Do We Really Need a Map?
5(1)
1.1 Router Initial Configuration
6(14)
1.1.1 Router Functions
6(4)
1.1.1.1 Characteristics of a Network
6(1)
1.1.1.2 Why Routing?
7(1)
1.1.1.3 Routers Are Computers
7(1)
1.1.1.4 Routers Interconnect Networks
8(1)
1.1.1.5 Routers Choose Best Paths
8(1)
1.1.1.6 Packet Forwarding Mechanisms
9(1)
1.1.1.7 Activity - Identify Router Components
10(1)
1.1.1.8 Packet Tracer - Using Traceroute to Discover the Network
10(1)
1.1.1.9 Lab - Mapping the Internet
10(1)
1.1.2 Connect Devices
10(4)
1.1.2.1 Connect to a Network
10(1)
1.1.2.2 Default Gateways
11(1)
1.1.2.3 Document Network Addressing
12(1)
1.1.2.4 Enable IP on a Host
12(1)
1.1.2.5 Device LEDs
13(1)
1.1.2.6 Console Access
13(1)
1.1.2.7 Enable IP on a Switch
14(1)
1.1.2.8 Activity - Document an Addressing Scheme
14(1)
1.1.2.9 Packet Tracer - Documenting the Network
14(1)
1.1.3 Router Basic Settings
14(3)
1.1.3.1 Configure Basic Router Settings
14(1)
1.1.3.2 Configure an IPv4 Router Interface
15(1)
1.1.3.3 Configure an IPv6 Router Interface
15(1)
1.1.3.4 Configure an IPv4 Loopback Interface
16(1)
1.1.3.5 Packet Tracer - Configuring IPv4 and IPv6 Interfaces
17(1)
1.1.4 Verify Connectivity of Directly Connected Networks
17(3)
1.1.4.1 Verify Interface Settings
17(1)
1.1.4.2 Verify IPv6 Interface Settings
18(1)
1.1.4.3 Filter Show Command Output
19(1)
1.1.4.4 Command History Feature
19(1)
1.1.4.5 Packet Tracer - Configuring and Verifying a Small Network
20(1)
1.1.4.6 Lab - Configuring Basic Router Settings with IOS CLI
20(1)
1.2 Routing Decisions
20(5)
1.2.1 Switching Packets Between Networks
20(3)
1.2.1.1 Router Switching Function
20(1)
1.2.1.2 Send a Packet
21(1)
1.2.1.3 Forward to the Next Hop
21(1)
1.2.1.4 Packet Routing
22(1)
1.2.1.5 Reach the Destination
23(1)
1.2.1.6 Activity - Match Layer 2 and Layer 3 Addressing
23(1)
1.2.2 Path Determination
23(2)
1.2.2.1 Routing Decisions
23(1)
1.2.2.2 Best Path
24(1)
1.2.2.3 Load Balancing
24(1)
1.2.2.4 Administrative Distance
25(1)
1.2.2.5 Activity - Order the Steps in the Packet Forwarding Process
25(1)
1.2.2.6 Activity - Match the Administrative Distance to the Route Source
25(1)
1.3 Router Operation
25(7)
1.3.1 Analyze the Routing Table
25(2)
1.3.1.1 The Routing Table
25(1)
1.3.1.2 Routing Table Sources
26(1)
1.3.1.3 Remote Network Routing Entries
27(1)
1.3.1.4 Activity - Interpret the Content of a Routing Table Entry
27(1)
1.3.2 Directly Connected Routes
27(2)
1.3.2.1 Directly Connected Interfaces
27(1)
1.3.2.2 Directly Connected Routing Table Entries
27(1)
1.3.2.3 Directly Connected Examples
28(1)
1.3.2.4 Directly Connected IPv6 Example
28(1)
1.3.2.5 Packet Tracer - Investigating Directly Connected Routes
29(1)
1.3.3 Statically Learned Routes
29(2)
1.3.3.1 Static Routes
29(1)
1.3.3.2 Static Route Examples
29(1)
1.3.3.3 Static IPv6 Route Examples
30(1)
1.3.4 Dynamic Routing Protocols
31(1)
1.3.4.1 Dynamic Routing
31(1)
1.3.4.2 IPv4 Routing Protocols
31(1)
1.3.4.3 IPv4 Dynamic Routing Examples
31(1)
1.3.4.4 IPv6 Routing Protocols
32(1)
1.3.4.5 IPv6 Dynamic Routing Examples
32(1)
1.4 Summary
32(2)
1.4.1.1 Activity - We Really Could Use a Map!
32(1)
1.4.1.2 Routing Concepts
33(1)
Quiz
34(1)
Exam
34(1)
Your
Chapter Notes
34(1)
Chapter 2 Static Routing 35(22)
2.0 Introduction
35(1)
2.0.1.1 Static Routing
35(1)
2.0.1.2 Activity - Which Way Should We Go
35(1)
2.1 Implement Static Routes
36(3)
2.1.1 Static Routing
36(1)
2.1.1.1 Reach Remote Networks
36(1)
2.1.1.2 Why Use Static Routing?
36(1)
2.1.1.3 When to Use Static Routes
37(1)
2.1.1.4 Activity - Identify the Advantages and Disadvantages of Static Routing
37(1)
2.1.2 Types of Static Routes
37(2)
2.1.2.1 Static Route Applications
37(1)
2.1.2.2 Standard Static Route
38(1)
2.1.2.3 Default Static Route
38(1)
2.1.2.4 Summary Static Route
38(1)
2.1.2.5 Floating Static Route
38(1)
2.1.2.6 Activity - Identify the Type of Static Route
39(1)
2.2 Configure Static and Default Routes
39(12)
2.2.1 Configure IPv4 Static Routes
39(4)
2.2.1.1 ip route Command
39(1)
2.2.1.2 Next-Hop Options
40(1)
2.2.1.3 Configure a Next-Hop Static Route
40(1)
2.2.1.4 Configure a Directly Connected Static Route
41(1)
2.2.1.5 Configure a Fully Specified Static Route
41(1)
2.2.1.6 Verify a Static Route
42(1)
2.2.2 Configure IPv4 Default Routes
43(1)
2.2.2.1 Default Static Route
43(1)
2.2.2.2 Configure a Default Static Route
43(1)
2.2.2.3 Verify a Default Static Route
43(1)
2.2.2.4 Packet Tracer - Configuring IPv4 Static and Default Routes
44(1)
2.2.2.5 Lab - Configuring IPv4 Static and Default Routes
44(1)
2.2.3 Configure IPv6 Static Routes
44(3)
2.2.3.1 The ipv6 route Command
44(1)
2.2.3.2 Next-Hop Options
44(1)
2.2.3.3 Configure a Next-Hop Static IPv6 Route
45(1)
2.2.3.4 Configure a Directly Connected Static IPv6 Route
46(1)
2.2.3.5 Configure a Fully Specified Static IPv6 Route
46(1)
2.2.3.6 Verify IPv6 Static Routes
47(1)
2.2.4 Configure IPv6 Default Routes
47(1)
2.2.4.1 Default Static IPv6 Route
47(1)
2.2.4.2 Configure a Default Static IPv6 Route
47(1)
2.2.4.3 Verify a Default Static Route
48(1)
2.2.4.4 Packet Tracer - Configuring IPv6 Static and Default Routes
48(1)
2.2.4.5 Lab - Configuring IPv6 Static and Default Routes
48(1)
2.2.5 Configure Floating Static Routes
48(2)
2.2.5.1 Floating Static Routes
48(1)
2.2.5.2 Configure an IPv4 Floating Static Route
49(1)
2.2.5.3 Test the IPv4 Floating Static Route
49(1)
2.2.5.4 Configure an IPv6 Floating Static Route
49(1)
2.2.5.5 Packet Tracer - Configuring Floating Static Routes
50(1)
2.2.6 Configure Static Host Routes
50(1)
2.2.6.1 Automatically Installed Host Routes
50(1)
2.2.6.2 Configure IPv4 and IPv6 Static Host Routes
50(1)
2.3 Troubleshoot Static and Default Route
51(2)
2.3.1 Packet Processing with Static Routes
51(1)
2.3.1.1 Static Routes and Packet Forwarding
51(1)
2.3.2 Troubleshoot IPv4 Static and Default Route Configuration
51(2)
2.3.2.1 Troubleshoot a Missing Route
51(1)
2.3.2.2 Solve a Connectivity Problem
52(1)
2.3.2.3 Packet Tracer - Troubleshooting Static Routes
53(1)
2.3.2.4 Lab - Troubleshooting Static Routes
53(1)
2.4 Summary
53(2)
2.4.1.1 Activity - Make It Static
53(1)
2.4.1.2 Static Routing
54(1)
Quiz
55(1)
Exam
55(1)
Your
Chapter Notes
55(2)
Chapter 3 Dynamic Routing 57(16)
3.0 Introduction
57(1)
3.0.1.1 Dynamic Routing
57(1)
3.0.1.2 How Much Does This Cost
57(1)
3.1 Dynamic Routing Protocols
58(3)
3.1.1 Dynamic Routing Protocol Overview
58(1)
3.1.1.1 Dynamic Routing Protocol Evolution
58(1)
3.1.1.2 Dynamic Routing Protocol Components
59(1)
3.1.2 Dynamic versus Static Routing
59(2)
3.1.2.1 Static Routing Uses
59(1)
3.1.2.2 Static Routing Advantages and Disadvantages
60(1)
3.1.2.3 Dynamic Routing Protocols Uses
60(1)
3.1.2.4 Dynamic Routing Advantages and Disadvantages
60(1)
3.1.2.5 Activity - Compare Static and Dynamic Routing
60(1)
3.2 RIPv2
61(3)
3.2.1 Configuring the RIP Protocol
61(3)
3.2.1.1 Router RIP Configuration Mode
61(1)
3.2.1.2 Advertise Networks
61(1)
3.2.1.3 Verify RIP Routing
62(1)
3.2.1.4 Enable and Verify RIPv2
62(1)
3.2.1.5 Disable Auto Summarization
63(1)
3.2.1.6 Configure Passive Interfaces
63(1)
3.2.1.7 Propagate a Default Route
64(1)
3.2.1.8 Packet Tracer - Configuring RIPv2
64(1)
3.2.1.9 Lab - Configuring Basic RIPv2
64(1)
3.3 The Routing Table
64(6)
3.3.1 Parts of an IPv4 Route Entry
64(2)
3.3.1.1 Routing Table Entries
64(1)
3.3.1.2 Directly Connected Entries
65(1)
3.3.1.3 Remote Network Entries
66(1)
3.3.1.4 Activity - Identify Parts of an IPv4 Routing Table Entry
66(1)
3.3.2 Dynamically Learned IPv4 Routes
66(1)
3.3.2.1 Routing Table Terms
66(1)
3.3.2.2 Ultimate Route
66(1)
3.3.2.3 Level 1 Route
67(1)
3.3.2.4 Level 1 Parent Route
67(1)
3.3.2.5 Level 2 Child Route
67(1)
3.3.2.6 Activity - Identify Parent and Child IPv4 Routes
67(1)
3.3.3 The IPv4 Route Lookup Process
67(2)
3.3.3.1 Route Lookup Process
67(1)
3.3.3.2 Best Route = Longest Match
68(1)
3.3.3.3 Activity - Determine the Longest Match Route
69(1)
3.3.4 Analyze an IPv6 Routing Table
69(1)
3.3.4.1 IPv6 Routing Table Entries
69(1)
3.3.4.2 Directly Connected Entries
69(1)
3.3.4.3 Remote IPv6 Network Entries
70(1)
3.3.4.4 Activity - Identify Parts of an IPv6 Routing Table Entry
70(1)
3.4 Summary
70(2)
3.4.1.1 IPv6 - Details, Details
70(1)
3.4.1.2 Dynamic Routing
71(1)
Quiz
72(1)
Exam
72(1)
Your
Chapter Notes
72(1)
Chapter 4 Switched Networks 73(14)
4.0 Introduction
73(1)
4.0.1.1 Switched Networks
73(1)
4.0.1.2 Sent or Received Instructions
73(1)
4.1 LAN Design
74(4)
4.1.1 Converged Networks
74(3)
4.1.1.1 Growing Complexity of Networks
74(1)
4.1.1.2 Elements of a Converged Network
74(1)
4.1.1.3 Cisco Borderless Networks
75(1)
4.1.1.4 Hierarchy in the Borderless Switched Network
75(1)
4.1.1.5 Access, Distribution, and Core Layers
76(1)
4.1.1.6 Activity - Identify Switched Network Terminology
77(1)
4.1.2 Switched Networks
77(1)
4.1.2.1 Role of Switched Networks
77(1)
4.1.2.2 Form Factors
77(1)
4.1.2.3 Activity - Identify Switch Hardware
78(1)
4.2 The Switched Environment
78(5)
4.2.1 Frame Forwarding
78(3)
4.2.1.1 Switching as a General Concept in Networking and Telecommunications
78(1)
4.2.1.2 Dynamically Populating a Switch MAC Address Table
79(1)
4.2.1.3 Switch Forwarding Methods
80(1)
4.2.1.4 Store-and-Forward Switching
80(1)
4.2.1.5 Cut-Through Switching
81(1)
4.2.1.6 Activity - Frame Forwarding Methods
81(1)
4.2.1.7 Activity - Switch It!
81(1)
4.2.2 Switching Domains
81(2)
4.2.2.1 Collision Domains
81(1)
4.2.2.2 Broadcast Domains
82(1)
4.2.2.3 Alleviating Network Congestion
82(1)
4.2.2.4 Activity - Circle the Domain
83(1)
4.3 Summary
83(2)
4.3.1.1 It's Network Access Time
83(1)
4.3.1.2 Basic Switch Configurations
83(1)
4.3.1.3 Switched Networks
83(2)
Quiz
85(1)
Exam
85(1)
Your
Chapter Notes
85(2)
Chapter 5 Switch Configuration 87(20)
5.0 Introduction
87(1)
5.0.1.1 Switch Configuration
87(1)
5.0.1.2 Activity - Stand By Me
87(1)
5.1 Basic Switch Configuration
88(8)
5.1.1 Configure a Switch with Initial Settings
88(4)
5.1.1.1 Switch Boot Sequence
88(1)
5.1.1.2 Recovering From a System Crash
89(1)
5.1.1.3 Switch LED Indicators
89(1)
5.1.1.4 Preparing for Basic Switch Management
90(1)
5.1.1.5 Configuring Basic Switch Management Access with IPv4
91(1)
5.1.1.6 Lab - Basic Switch Configuration
91(1)
5.1.2 Configure Switch Ports
92(4)
5.1.2.1 Duplex Communication
92(1)
5.1.2.2 Configure Switch Ports at the Physical Layer
92(1)
5.1.2.3 Auto-MDIX
93(1)
5.1.2.4 Verifying Switch Port Configuration
93(1)
5.1.2.5 Network Access Layer Issues
94(1)
5.1.2.6 Troubleshooting Network Access Layer Issues
95(1)
5.2 Switch Security
96(6)
5.2.1 Secure Remote Access
96(2)
5.2.1.1 SSH Operation
96(1)
5.2.1.2 Configuring SSH
96(1)
5.2.1.3 Verifying SSH
97(1)
5.2.1.4 Packet Tracer - Configuring SSH
98(1)
5.2.2 Switch Port Security
98(4)
5.2.2.1 Secure Unused Ports
98(1)
5.2.2.2 Port Security: Operation
98(2)
5.2.2.3 Port Security: Violation Modes
100(1)
5.2.2.4 Port Security: Configuring
100(1)
5.2.2.5 Port Security: Verifying
100(1)
5.2.2.6 Ports in Error Disabled State
101(1)
5.2.2.7 Packet Tracer - Configuring Switch Port Security
101(1)
5.2.2.8 Packet Tracer - Troubleshooting Switch Port Security
101(1)
5.2.2.9 Lab - Configuring Switch Security Features
102(1)
5.3 Summary
102(3)
5.3.1.1 Activity - Switch Trio
102(1)
5.3.1.2 Packet Tracer - Skills Integration Challenge
102(1)
5.3.1.3 Switch Configuration
102(3)
Quiz
105(1)
Exam
105(1)
Your
Chapter Notes
105(2)
Chapter 6 VLANs 107(28)
6.0 Introduction
107(1)
6.0.1.1 VLANs
107(1)
6.0.1.2 Class Activity - Vacation Station
107(1)
6.1 VLAN Segmentation
108(6)
6.1.1 Overview of VLANs
108(3)
6.1.1.1 VLAN Definitions
108(1)
6.1.1.2 Benefits of VLANs
108(1)
6.1.1.3 Types of VLANs
109(1)
6.1.1.4 Voice VLANs
110(1)
6.1.1.5 Packet Tracer - Who Hears the Broadcast?
111(1)
6.1.2 VLANs in a Multi-Switched Environment
111(3)
6.1.2.1 VLAN Trunks
111(1)
6.1.2.2 Controlling Broadcast Domains with VLANs
111(1)
6.1.2.3 Tagging Ethernet Frames for VLAN Identification
112(1)
6.1.2.4 Native VLANs and 802.1Q Tagging
113(1)
6.1.2.5 Voice VLAN Tagging
113(1)
6.1.2.6 Activity - Predict Switch Behavior
114(1)
6.1.2.7 Packet Tracer - Investigating a VLAN Implementation
114(1)
6.2 VLAN Implementations
114(9)
6.2.1 VLAN Assignment
114(4)
6.2.1.1 VLAN Ranges on Catalyst Switches
114(1)
6.2.1.2 Creating a VLAN
115(1)
6.2.1.3 Assigning Ports to VLANs
116(1)
6.2.1.4 Changing VLAN Port Membership
116(1)
6.2.1.5 Deleting VLANs
117(1)
6.2.1.6 Verifying VLAN Information
117(1)
6.2.1.7 Packet Tracer - Configuring VLANs
117(1)
6.2.2 VLAN Trunks
118(1)
6.2.2.1 Configuring IEEE 802.1Q Trunk Links
118(1)
6.2.2.2 Resetting the Trunk to Default State
118(1)
6.2.2.3 Verifying Trunk Configuration
119(1)
6.2.2.4 Packet Tracer - Configuring Trunks
119(1)
6.2.2.5 Lab - Configuring VLANs and Trunking
119(1)
6.2.3 Troubleshoot VLANs and Trunks
119(4)
6.2.3.1 IP Addressing Issues with VLAN
119(1)
6.2.3.2 Missing VLANs
120(1)
6.2.3.3 Introduction to Troubleshooting Trunks
120(1)
6.2.3.4 Common Problems with Trunks
121(1)
6.2.3.5 Incorrect Port Mode
121(1)
6.2.3.6 Incorrect VLAN List
122(1)
6.2.3.7 Packet Tracer - Troubleshooting a VLAN Implementation - Scenario 1
122(1)
6.2.3.8 Packet Tracer - Troubleshooting a VLAN Implementation - Scenario 2
122(1)
6.2.3.9 Lab - Troubleshooting VLAN Configurations
123(1)
6.3 Inter-VLAN Routing Using Routers
123(8)
6.3.1 Inter-VLAN Routing Operation
123(2)
6.3.1.1 What is Inter-VLAN Routing?
123(1)
6.3.1.2 Legacy Inter-VLAN Routing
123(1)
6.3.1.3 Router-on-a-Stick Inter-VLAN Routing
124(1)
6.3.1.4 Activity - Identify the Types of Inter-VLAN Routing
125(1)
6.3.2 Configure Legacy Inter-VLAN Routing
125(2)
6.3.2.1 Configure Legacy Inter-VLAN Routing: Preparation
125(1)
6.3.2.2 Configure Legacy Inter-VLAN Routing: Switch Configuration
126(1)
6.3.2.3 Configure Legacy Inter-VLAN Routing: Router Interface Configuration
127(1)
6.3.2.4 Lab - Configuring Per-Interface Inter-VLAN Routing
127(1)
6.3.3 Configure Router-on-a-Stick Inter-VLAN Routing
127(4)
6.3.3.1 Configure Router-on-a-Stick: Preparation
127(1)
6.3.3.2 Configure Router-on-a-Stick: Switch Configuration
128(1)
6.3.3.3 Configure Router-on-a-Stick: Router Subinterface Configuration
129(1)
6.3.3.4 Configure Router-on-a-Stick: Verifying Subinterfaces
129(1)
6.3.3.5 Configure Router-on-a-Stick: Verifying Routing
130(1)
6.3.3.6 Packet Tracer - Configuring Router-on-a-Stick Inter-VLAN Routing
131(1)
6.3.3.7 Lab - Configuring 801.2Q Trunk-Based Inter-VLAN Routing
131(1)
6.3.3.8 Packet Tracer - Inter-VLAN Routing Challenge
131(1)
6.4 Summary
131(2)
6.4.1.1 The Inside Track
131(1)
6.4.1.2 Packet Tracer - Skills Integration Challenge
131(1)
6.4.1.3 VLANs
132(1)
Quiz
133(1)
Exam
133(1)
Your
Chapter Notes
133(2)
Chapter 7 Access Control Lists 135(22)
7.0 Introduction
135(1)
7.0.1.1 Access Control Lists
135(1)
7.0.1.2 Permit Me to Assist You
135(1)
7.1 ACL Operation
136(7)
7.1.1 Purpose of ACLs
136(2)
7.1.1.1 What is an ACL?
136(1)
7.1.1.2 Packet Filtering
136(1)
7.1.1.3 ACL Operation
137(1)
7.1.1.4 Packet Tracer - ACL Demonstration
137(1)
7.1.2 Wildcard Masks in ACLs
138(2)
7.1.2.1 Introducing ACL Wildcard Masking
138(1)
7.1.2.2 Wildcard Mask Examples
138(1)
7.1.2.3 Calculating the Wildcard Mask
139(1)
7.1.2.4 Wildcard Mask Keywords
140(1)
7.1.2.5 Wildcard Mask Keyword Examples
140(1)
7.1.2.6 Activity - Determine the Correct Wildcard Mask
140(1)
7.1.2.7 Activity - Determine the Permit or Deny
140(1)
7.1.3 Guidelines for ACL Creation
140(1)
7.1.3.1 General Guidelines for Creating ACLs
140(1)
7.1.3.2 ACL Best Practices
141(1)
7.1.3.3 Activity - ACL Operation
141(1)
7.1.4 Guidelines for ACL Placement
141(2)
7.1.4.1 Where to Place ACLs
141(1)
7.1.4.2 Standard ACL Placement
142(1)
7.2 Standard IPv4 ACLs
143(6)
7.2.1 Configure Standard IPv4 ACLs
143(2)
7.2.1.1 Numbered Standard IPv4 ACL Syntax
143(1)
7.2.1.2 Applying Standard IPv4 ACLs to Interfaces
143(1)
7.2.1.3 Numbered Standard IPv4 ACL Examples
144(1)
7.2.1.4 Named Standard IPv4 ACL Syntax
144(1)
7.2.1.5 Activity - Configuring Standard IPv4 ACLs
145(1)
7.2.1.6 Packet Tracer - Configuring Numbered Standard IPv4 ACLs
145(1)
7.2.1.7 Packet Tracer - Configuring Named Standard IPv4 ACLs
145(1)
7.2.2 Modify IPv4 ACLs
145(3)
7.2.2.1 Method 1 - Use a Text Editor
145(1)
7.2.2.2 Method 2 - Use Sequence Numbers
146(1)
7.2.2.3 Editing Standard Named ACLs
147(1)
7.2.2.4 Verifying ACLs
147(1)
7.2.2.5 ACL Statistics
147(1)
7.2.2.6 Lab - Configuring and Modifying Standard IPv4 ACLs
148(1)
7.2.3 Securing VTY ports with a Standard IPv4 ACL
148(1)
7.2.3.1 The access-class Command
148(1)
7.2.3.2 Verifying the VTY Port is Secured
149(1)
7.2.3.3 Packet Tracer - Configuring an IPv4 ACL on VTY Lines
149(1)
7.2.3.4 Lab - Configuring and Verifying VTY Restrictions
149(1)
7.3 Troubleshoot ACLs
149(4)
7.3.1 Processing Packets with ACLs
149(2)
7.3.1.1 The Implicit Deny Any
149(1)
7.3.1.2 The Order of ACEs in an ACL
150(1)
7.3.1.3 Cisco IOS Reorders Standard ACLs
150(1)
7.3.1.4 Routing Processes and ACLs
151(1)
7.3.2 Common IPv4 Standard ACL Errors
151(2)
7.3.2.1 Troubleshooting Standard IPv4 ACLs - Example 1
151(1)
7.3.2.2 Troubleshooting Standard IPv4 ACLs - Example 2
152(1)
7.3.2.3 Troubleshooting Standard IPv4 ACLs - Example 3
152(1)
7.3.2.4 Packet Tracer - Troubleshooting Standard IPv4 ACLs
152(1)
7.3.2.5 Lab - Troubleshooting Standard IPv4 ACL Configuration and Placement
153(1)
7.4 Summary
153(2)
7.4.1.1 FTP Denied
153(1)
7.4.1.2 Packet Tracer - Skills Integration Challenge
153(1)
7.4.1.3 Access Control Lists
153(2)
Quiz
155(1)
Exam
155(1)
Your
Chapter Notes
155(2)
Chapter 8 DHCP 157(24)
8.0 Introduction
157(1)
8.0.1.1 DHCP
157(1)
8.1 DHCPv4
157(10)
8.1.1 DHCPv4 Operation
157(4)
8.1.1.1 Introducing DHCPv4
157(1)
8.1.1.2 DHCPv4 Operation
158(1)
8.1.1.3 DHCPv4 Message Format
159(1)
8.1.1.4 DHCPv4 Discover and Offer Messages
160(1)
8.1.1.5 Activity - Identify the Steps in DHCPv4 Operation
161(1)
8.1.2 Configuring a Basic DHCPv4 Server
161(3)
8.1.2.1 Configuring a Basic DHCPv4 Server
161(1)
8.1.2.2 Verifying DHCPv4
162(1)
8.1.2.3 DHCPv4 Relay
163(1)
8.1.2.4 Lab - Configuring Basic DHCPv4 on a Router
164(1)
8.1.2.5 Lab - Configuring Basic DHCPv4 on a Switch
164(1)
8.1.3 Configure DHCPv4 Client
164(1)
8.1.3.1 Configuring a Router as DHCPv4 Client
164(1)
8.1.3.2 Configuring a Wireless Router as a DHCPv4 Client
164(1)
8.1.3.3 Packet Tracer - Configuring DHCPv4 Using Cisco IOS
165(1)
8.1.4 Troubleshoot DHCPv4
165(2)
8.1.4.1 Troubleshooting Tasks
165(1)
8.1.4.2 Verify Router DHCPv4 Configuration
166(1)
8.1.4.3 Debugging DHCPv4
167(1)
8.1.4.4 Lab - Troubleshooting DHCPv4
167(1)
8.2 DHCPv6
167(11)
8.2.1 SLAAC and DHCPv6
167(5)
8.2.1.1 Stateless Address Autoconfiguration (SLAAC)
167(1)
8.2.1.2 SLAAC Operation
168(1)
8.2.1.3 SLAAC and DHCPv6
169(1)
8.2.1.4 SLAAC Option
169(1)
8.2.1.5 Stateless DHCPv6 Option
170(1)
8.2.1.6 Stateful DHCPv6 Option
170(1)
8.2.1.7 DHCPv6 Operations
171(1)
8.2.1.8 Activity - Identify the Steps in DHCPv6 Operation
171(1)
8.2.2 Stateless DHCPv6
172(1)
8.2.2.1 Configuring a Router as a Stateless DHCPv6 Server
172(1)
8.2.2.2 Configuring a Router as a Stateless DHCPv6 Client
172(1)
8.2.2.3 Verifying Stateless DHCPv6
173(1)
8.2.3 Stateful DHCPv6 Server
173(3)
8.2.3.1 Configuring a Router as a Stateful DHCPv6 Server
173(1)
8.2.3.2 Configuring a Router as a Stateful DHCPv6 Client
174(1)
8.2.3.3 Verifying Stateful DHCPv6
174(1)
8.2.3.4 Configuring a Router as a DHCPv6 Relay Agent
175(1)
8.2.3.5 Lab - Configuring Stateless and Stateful DHCPv6
175(1)
8.2.4 Troubleshoot DHCPv6
176(2)
8.2.4.1 Troubleshooting Tasks
176(1)
8.2.4.2 Verify Router DHCPv6 Configuration
177(1)
8.2.4.3 Debugging DHCPv6
177(1)
8.2.4.4 Lab - Troubleshooting DHCPv6
177(1)
8.3 Summary
178(2)
8.3.1.1 Class Activity - IoE and DHCP
178(1)
8.3.1.2 Packet Tracer - Skills Integration Challenge
178(1)
8.3.1.3 DHCP
178(2)
Quiz
180(1)
Exam
180(1)
Your
Chapter Notes
180(1)
Chapter 9 NAT for IPv4 181(26)
9.0 Introduction
181(1)
9.0.1.1 NAT for IPv4
181(1)
9.0.1.2 Conceptual NAT
181(1)
9.1 NAT Operation
182(7)
9.1.1 NAT Characteristics
182(3)
9.1.1.1 IPv4 Private Address Space
182(1)
9.1.1.2 What is NAT?
182(1)
9.1.1.3 NAT Terminology
183(1)
9.1.1.4 NAT Terminology (Cont.)
184(1)
9.1.1.5 How NAT Works
184(1)
9.1.1.6 Activity - Identify the NAT Terminology
185(1)
9.1.2 Types of NAT
185(3)
9.1.2.1 Static NAT
185(1)
9.1.2.2 Dynamic NAT
186(1)
9.1.2.3 Port Address Translation (PAT)
186(1)
9.1.2.4 Next Available Port
187(1)
9.1.2.5 Comparing NAT and PAT
187(1)
9.1.2.6 Packet Tracer - Investigating NAT Operation
188(1)
9.1.3 NAT Advantages
188(1)
9.1.3.1 Advantages of NAT
188(1)
9.1.3.2 Disadvantages of NAT
188(1)
9.2 Configure NAT
189(12)
9.2.1 Configuring Static NAT
189(2)
9.2.1.1 Configure Static NAT
189(1)
9.2.1.2 Analyzing Static NAT
190(1)
9.2.1.3 Verifying Static NAT
190(1)
9.2.1.4 Packet Tracer - Configuring Static NAT
191(1)
9.2.2 Configure Dynamic NAT
191(3)
9.2.2.1 Dynamic NAT Operation
191(1)
9.2.2.2 Configuring Dynamic NAT
191(1)
9.2.2.3 Analyzing Dynamic NAT
192(1)
9.2.2.4 Verifying Dynamic NAT
193(1)
9.2.2.5 Packet Tracer - Configuring Dynamic NAT
194(1)
9.2.2.6 Lab - Configuring Dynamic and Static NAT
194(1)
9.2.3 Configure PAT
194(3)
9.2.3.1 Configuring PAT Address Pool
194(1)
9.2.3.2 Configuring PAT: Single Address
195(1)
9.2.3.3 Analyzing PAT
195(1)
9.2.3.4 Verifying PAT
196(1)
9.2.3.5 Activity - Identify the Address Information at Each Hop
197(1)
9.2.3.6 Packet Tracer - Implementing Static and Dynamic NAT
197(1)
9.2.3.7 Lab - Configuring Port Address Translation (PAT)
197(1)
9.2.4 Configure Port Forwarding
197(2)
9.2.4.1 Port Forwarding
197(1)
9.2.4.2 Wireless Router Example
198(1)
9.2.4.3 Configuring Port Forwarding with IOS
198(1)
9.2.4.4 Packet Tracer - Configuring Port Forwarding on a Wireless Router
199(1)
9.2.5 NAT and IPv6
199(2)
9.2.5.1 NAT for IPv6?
199(1)
9.2.5.2 IPv6 Unique Local Addresses
200(1)
9.2.5.3 NAT for IPv6
201(1)
9.3 Troubleshoot NAT
201(2)
9.3.1 NAT Troubleshooting Commands
201(2)
9.3.1.1 The show ip nat Commands
201(1)
9.3.1.2 The debug ip nat Command
202(1)
9.3.1.3 NAT Troubleshooting Scenario
202(1)
9.3.1.4 Packet Tracer - Verifying and Troubleshooting NAT Configurations
203(1)
9.3.1.5 Lab - Troubleshooting NAT Configurations
203(1)
9.4 Summary
203(2)
9.4.1.1 NAT Check
203(1)
9.4.1.2 Packet Tracer - Skills Integration Challenge
204(1)
9.4.1.3 NAT for IPv4
204(1)
Quiz
205(1)
Exam
205(1)
Your
Chapter Notes
205(2)
Chapter 10 Device Discovery, Management, and Maintenance 207(26)
10.0 Introduction
207(1)
10.0.1.1 Device Discovery, Management, and Maintenance
207(1)
10.1 Device Discovery
207(3)
10.1.1 Device Discovery with CDP
207(2)
10.1.1.1 CDP Overview
207(1)
10.1.1.2 Configure and Verify CDP
208(1)
10.1.1.3 Discover Devices Using CDP
208(1)
10.1.1.4 Packet Tracer - Map a Network Using CDP
209(1)
10.1.2 Device Discovery with LLDP
209(1)
10.1.2.1 LLDP Overview
209(1)
10.1.2.2 Configure and Verify LLDP
209(1)
10.1.2.3 Discover Devices Using LLDP
209(1)
10.1.2.4 Activity - Compare CDP and LLDP
210(1)
10.1.2.5 Lab - Configure CDP and LLDP
210(1)
10.2 Device Management
210(6)
10.2.1 NTP
210(2)
10.2.1.1 Setting the System Clock
210(1)
10.2.1.2 NTP Operation
211(1)
10.2.1.3 Configure and Verify NTP
211(1)
10.2.1.4 Packet Tracer - Configure and Verify NTP
212(1)
10.2.2 Syslog Operation
212(2)
10.2.2.1 Introduction to Syslog
212(1)
10.2.2.2 Syslog Operation
212(1)
10.2.2.3 Syslog Message Format
213(1)
10.2.2.4 Service Timestamp
214(1)
10.2.2.5 Activity - Interpret Syslog Output
214(1)
10.2.3 Syslog Configuration
214(2)
10.2.3.1 Syslog Server
214(1)
10.2.3.2 Default Logging
215(1)
10.2.3.3 Router and Switch Commands for Syslog Clients
215(1)
10.2.3.4 Verifying Syslog
216(1)
10.2.3.5 Packet Tracer - Configuring Syslog and NTP
216(1)
10.2.3.6 Lab - Configuring Syslog and NTP
216(1)
10.3 Device Maintenance
216(14)
10.3.1 Router and Switch File Maintenance
216(5)
10.3.1.1 Router File Systems
216(1)
10.3.1.2 Switch File Systems
217(1)
10.3.1.3 Backing Up and Restoring Using Text Files
217(1)
10.3.1.4 Backing up and Restoring TFTP
218(1)
10.3.1.5 Using USB Ports on a Cisco Router
219(1)
10.3.1.6 Backing Up and Restoring Using a USB
219(1)
10.3.1.7 Password Recovery
219(1)
10.3.1.8 Packet Tracer - Backing Up Configuration Files
220(1)
10.3.1.9 Lab - Managing Router Configuration Files with Tera Term
221(1)
10.3.1.10 Lab - Managing Device Configuration Files Using TFTP, Flash, and USB
221(1)
10.3.1.11 Lab - Researching Password Recovery Procedures
221(1)
10.3.2 IOS System Files
221(2)
10.3.2.1 IOS 15 System Image Packaging
221(1)
10.3.2.2 IOS Image Filenames
222(1)
10.3.3 IOS Image Management
223(2)
10.3.3.1 TFTP Servers as a Backup Location
223(1)
10.3.3.2 Steps to Backup IOS Image to TFTP Server
223(1)
10.3.3.3 Steps to Copy an IOS Image to a Device
224(1)
10.3.3.4 The boot system Command
225(1)
10.3.3.5 Packet Tracer - Using a TFTP Server to Upgrade a Cisco IOS Image
225(1)
10.3.3.6 Video Demonstration - Managing Cisco IOS Images
225(1)
10.3.4 Software Licensing
225(3)
10.3.4.1 Licensing Overview
225(1)
10.3.4.2 Licensing Process
226(1)
10.3.4.3 Step
1. Purchase the Software Package or Feature to Install
226(1)
10.3.4.4 Step
2. Obtain a License
227(1)
10.3.4.5 Step
3. Install the License
227(1)
10.3.5 License Verification and Management
228(2)
10.3.5.1 License Verification
228(1)
10.3.5.2 Activate an Evaluation Right-To-Use License
228(1)
10.3.5.3 Back up the License
229(1)
10.3.5.4 Uninstall the License
230(1)
10.3.5.5 Video Demonstration - Working with IOS 15 Image Licenses
230(1)
10.4 Summary
230(2)
10.4.1.1 Packet Tracer - Skills Integration Challenge
230(1)
10.4.1.2 Device Discovery, Management, and Maintenance
230(2)
Chapter 10 Quiz
232(1)
Chapter 10 Exam
232(1)
Your
Chapter Notes
232(1)
Index 233
Cisco Networking Academy teaches hundreds of thousands of students annually the skills needed to build, design, and maintain networks, improving their career prospects while filling the global demand for networking professionals. With 10,000 academies in 165 countries, it helps individuals prepare for industry-recognized certifications and entry-level information and communication technology careers in virtually every industrydeveloping foundational technical skills while acquiring vital 21st-century career skills in problem solving, collaboration, and critical thinking. Cisco Networking Academy uses a public-private partnership model to create the "world's largest classroom."