Atjaunināt sīkdatņu piekrišanu

Advanced Designs and Researches for Manufacturing [Mīkstie vāki]

Edited by , Edited by , Edited by
  • Formāts: Paperback / softback, 2738 pages, height x width x depth: 240x170x137 mm, weight: 5100 g, Illustrations, unspecified, Contains 3 paperbacks
  • Sērija : Advanced Materials Research
  • Izdošanas datums: 09-Jan-2013
  • Izdevniecība: Trans Tech Publications Ltd
  • ISBN-10: 3037855444
  • ISBN-13: 9783037855447
Citas grāmatas par šo tēmu:
  • Mīkstie vāki
  • Cena: 569,70 €
  • Grāmatu piegādes laiks ir 3-4 nedēļas, ja grāmata ir uz vietas izdevniecības noliktavā. Ja izdevējam nepieciešams publicēt jaunu tirāžu, grāmatas piegāde var aizkavēties.
  • Daudzums:
  • Ielikt grozā
  • Piegādes laiks - 4-6 nedēļas
  • Pievienot vēlmju sarakstam
Advanced Designs and Researches for ManufacturingPalielināt
  • Formāts: Paperback / softback, 2738 pages, height x width x depth: 240x170x137 mm, weight: 5100 g, Illustrations, unspecified, Contains 3 paperbacks
  • Sērija : Advanced Materials Research
  • Izdošanas datums: 09-Jan-2013
  • Izdevniecība: Trans Tech Publications Ltd
  • ISBN-10: 3037855444
  • ISBN-13: 9783037855447
Citas grāmatas par šo tēmu:
Permanent link: https://www.kriso.lv/db/9783037855447.html
Keywords:
About 550 papers, selected from submissions, cover product design, manufacturing, and analysis; management and production scheduling; supply chain; computer-aided design, manufacture, and engineering; reliability, fault diagnostics, and quality monitoring; measurement techniques, technologies, and equipment; the dynamic analysis of mechanical systems and mechanical transmissions; fluid power transmission and control; mechatronics; industrial robots; control technologies and intelligent systems; electronic and microelectronic technology; embedded systems; signal and intelligent information processing; and software and computer research and engineering solutions. The three volumes are paged sequentially and indexed together in the final volume. Annotation ©2013 Book News, Inc., Portland, OR (booknews.com)
Preface v
Conference Organization vi
PART 1
Chapter 1 Product Design, Manufacturing and Analysis
The Optimization Design of Overhead Traveling Crane's Box Girder
3(6)
G.F. Tian
S.Z. Zhang
S.H. Sun
Requirement Forecasting of Equipment's Maintenance Spares-Parts Based on Exponential Smoothing Method
9(5)
X.C. Liu
Y.L. Zhang
A.J. Huang
L.Y. Xu
The Combined-Matching Design of the Tower Body of Tower Crane
14(5)
B. Li
Y.X. Ke
Z.L. Song
H.D. Liu
To Analyze the Influence Factors on Energy Saving of Hybrid Bus
19(5)
Y.L. Jiao
Y.P. Li
W.S. Yan
Optimization Design of Shading Shed Transmittance in Highway Tunnel Entrance
24(4)
G.C. Zhang
H. Bai
H.X. Liu
B.H. Zhang
Application Study of the Virtual Tactile Design in Product Design
28(6)
X.Y. Suo
R.B. Hu
R.P. Xu
Optimization Design of Stack Package Warpage Based on Moldflow Software
34(4)
M.X. Zang
T. Wang
C. Liu
Y.R. Zhao
A Parametric Study of the General Profile for Hydrodynamic Journal Bearings
38(6)
X.P. Pang
S.Y. Wei
K. Niu
The Exploration of Recycling Design of Furniture Products Based on Structure
44(5)
L. Liu
Application of Improved Genetic Algorithm to Traffic Equipment's Rush-Repair in the Wartime
49(4)
G.S. Wu
Q.Y. Zhang
Application of Fractal Graphics in Fashion Design
53(4)
Q.J. Ge
Y.T. Sun
Y. Liu
Design of the Process and Equipment of Melt PEK Filter
57(4)
X.J. Wu
Q. Qiao
Optimization Design Research on Manual Piston Pump
61(4)
N. Liu
J.L. Liu
B.H. Fang
H.W. Zhang
W.G. Shao
The Assembly Design of Non-Ball Mills
65(4)
K.S. Li
Y. Li
Static Analysis of Stator Housing of Screw Drilling Rig
69(4)
X.W. Sun
J. Wang
K. Wang
X. Feng
Design of Non-Ball Mill Based on the Green Conception
73(4)
K.S. Li
Y. Li
Thermal Design and Simulation for Lithium-Ion Power Battery Pack Assembly
77(4)
Z.J. He
X.J. Hu
S.Z. Di
B.B. Song
C.F. Yang
Preliminary Perform of PDM Technology in Automotive Design
81(4)
H. Zhou
Research on Storage Life of Electronic Equipment Based on Goodness of Fit Test Method
85(3)
J.S. Wang
J.H. Wu
Y.D. Wang
J.W. Lei
Optimizing Design of New Kind Acoustic Horns for Ultrasonic Machining Based on Finite-Element Method
88(4)
X.H. Zhang
J. Gao
K.X. Zhang
Research of a Variety of Fuel Injection Timing Control Experiment Station for Automotive Engine
92(4)
J.H. Zhang
M.F. Shou
L. Shi
Virtual Shaping Design of Electrically Driven Hunting Cart
96(4)
Q.L. Du
X.W. Jiang
Z.X. Cheng
Application of Advanced Materials in Sports Engineering
100(4)
Y.T. Cai
Z.Q. Song
A New Design Approach for PSS Conceptual Development
104(6)
L.J. Yang
K. Xing
S.H. Lee
The Analysis of the Fly Shear Head Motion Track
110(4)
J.L. Shi
C.Q. Zhu
M. Zhao
Innovative Design of Portable Public Transport System for University Students
114(5)
J.H. Xu
Appearance Design Research of Home Sealing Machine for Bagged Food
119(4)
L. Pan
X.C. Cheng
Q.L. Du
The Gate of General Top-Open Freight Train Security Investigation
123(4)
R. Gou
T. Huang
The Application of Gray Clustering and Information Axiom Integrated in the Scheme Evaluation of Mechanical Products
127(6)
J.W. Qiu
R.J. Zhang
X.X. Si
Application of Accuracy Engraving Technique in the Complex Curved Surface Mould Processing
133(4)
X. Liu
W. Fan
Collaborative Optimization on Structural Parameters of Scroll Compressor
137(6)
T. Liu
H.W. Sun
Z.X. Wu
M.H. Xu
Single Inlet Pressure Swirl Nozzle Stationary Wave Pattern and Quality Optimization
143(4)
J.L. Wu
D.Y. Zhang
X.G. Jiang
J.L. Lv
Application Boundary Element Method to Compute the Potential of the Eight-Needle Electrodes
147(5)
A.L. Wang
F.P. Liu
Thermal Layout Optimization of Stacked Chip Based on Ant Colony Algorithm
152(4)
J.G. Jiang
Q. Su
L.F. Shi
W.D. Xu
Developing Size Specifications of 3D Body Models for Males Aged between 7 and 18
156(10)
Y.L. Choi
Assembly Line Balancing the Comparison of COMSOAL and MSNSH Technique in Motorcycle Manufacturing Company
166(9)
A. Lerttira
P.K. Yarlagadda
A Novel Roller Chain Sleeve Crevice Identification and Orientation Device Design and Test
175(4)
S. Ding
X.L. Liu
Y.B. Zhang
J.J. Liu
G.Y. Zhu
P. Wang
Study of Wheat Straw Weaving Process and Decorative Effect
179(4)
B. Liu
F.H. Wang
F. Liu
J.P. Sun
The Analysis on Motion in Quiescence of Packaging Container Molding
183(6)
X.Z. He
D.Z. Liao
X.J. Xiong
Robust Design of an Ultra-Thin Centrifugal Fan on Fuzzy-Based Taguchi Method
189(4)
K.H. Hsien
S.C. Huang
Research on Key Technologies in the Field of Wood Saving and Substitution in Packaging of Electromechanical Products
193(7)
S.W. Su
A. Chen
H. Q. Yang
Inverter Based on Improved Z-Source Structure for Off-Grid Type Wind Power Generation
200(4)
X.G. Wang
Z.Y. Zhao
G.Q. Cao
Structure Design and Modeling for a Picking Bananas Manipulator
204(6)
H.J. Wang
G.G. Huang
J.X. Chen
X.J. Zou
Reinforced Techniques Analysis of Goaf-Side Entry at Isolated Island Coal Face-Based on FLAC Numerical Simulation
210(5)
W.H. Zha
Design of the Spring Fixture for Aging Treatment
215(7)
N.W. Wang
Z.C. Huang
A Framework for Life Cycle Cost Estimation of a Product Family at the Early Stage of Product Development
222(6)
J.S. The
P.K.D.V. Yarlagadda
M.A. Karim
C. Yan
Design of a Type of Semi-Automation Stretcher-Vehicle
228(6)
J.C. Dong
Y. Yang
Y.J. Li
C.T. Song
Marine Oil Spill Emergency Response Research
234(5)
F. Yu
X.F. Sun
X.Y. Zhang
Design and Kinematic Analysis of a New Grapple Mechanism
239(5)
F. Deng
J.B. Chen
M. Chen
F.J. Peng
Classification of Men's Shoulder Shapes Based on Pyramid Method
244(6)
M.H. Cui
Y.L. Choi
Y.J. Nam
Extraction of Design Factors of Product Family Based on Customer Needs
250(8)
M.N. Ni
Q.Z. Lv
P. Jin
Strength Finite Element Analysis and Test Research of Steel Package Rotation Table Beam and Tumbler
258(5)
J.Q. Liu
H.Y. Liu
Fuzzy Information Axiom in Conceptual Design Scheme Evaluation of Handling Equipments
263(4)
Q. He
R.J. Zhang
N. Guo
D.S. Cong
J.W. Qiu
Test Research on the New Electromechanical Axial-Flow Pump with Advantages of Small Vibration and Noise
267(4)
B. Fang
Q.D. Zhou
J.B. Xie
M.Z. Qiao
Innovation Design Method of Product Base on Materials Innovation Technologies
271(5)
Y. Guo
X. Shi
Study On the Design Methods of Fast Moving Consumer Goods
276(7)
M.N. Ni
L. Wang
Y. Li
Intelligent Design of Mechanical Products Based on Function-Knowledge-Structure
283(5)
F. Cao
Development of Parts Family Manage System Based on PDM in Large-Scale Air Separation Equipment
288(4)
R. Zhu
G. Meng
H.G. Li
An Efficient Torlerance Robust Design Method Based on Taguchi Theory
292(4)
H.M. Kan
H.B. Li
X.L. Xia
Y.T. Zhang
Research on Electric Power Equipment Preventive Maintenance Cycle on the Basis of Economic Life Cycle Costing
296(4)
Y. Li
Y.M. Hu
Y.F. Luo
C.C. Liu
T91 High Temperature Reheater Piping Leakage Analysis
300(4)
Y.J. Niu
L. Song
F.T. Hu
K.F. Wang
Accessories' Matching Design Study and Development
304(4)
X.Q. Yu
L.X. Fan
H.X. Zhang
Y.X. Chen
P.L. Yang
Z.F. Wang
Evaluation Model of Aircraft-Maintenance Mode Based on Improved AHP
308(6)
J.S. Chen
C. Liu
Design and Realization of Hand-Held Smart Electrothermal Umbrella Applied New Materials
314(5)
P. Gao
Y. Ping
G.J. Han
Research on Individualized Requirement Modeling Oriented to the Dynamic Synchronization
319(5)
Q. Yang
D.Z. Wei
W. Tang
Y.F. Zhu
The Research and Application of Seeding Machine's Dislocation Type Seeding Device
324(4)
R. Wu
Y.K. Xu
S. Xue
Design of a Kind of Drilling Machine for Semicircle Shaft
328(4)
W.M. Yang
S.X. Zhao
P.F. Zheng
Z.X. Lou
Stability Analysis of Pumper and Finite Element Analysis of Ladder Structure for a Scaling Ladder Pumper
332(4)
W.M. Yang
L.J. Pan
J. Lv
X.L. Deng
A Novel Approach to Evaluate the Stability of Production Manufacturing System Based on Petri-Net and Analytic Hierarchy Process
336(5)
H.X. You
Research and Design of a Novel Mobile Police Station
341(5)
X.Y. Zhao
X. Yuan
Y. Lou
Design and Simulation of Visual Miniature Loop Heat Pipe
346(6)
Y. Chen
Y. Qu
S.S. Zhang
Improvements in Manufacturing Processes in a Graphical Analysis as Result of Kaizen Events
352(6)
B.T. Rieger
M. Sebastian
A Comparison Study of Small Displacement Torsor and Analysis Line Methods for Functional Tolerance Analysis
358(7)
C.L. Li
J.X. Yang
J.Y. Wang
W.X. Ma
Ontology-Based Knowledge Representation for Mechanical Products
365(6)
J. Li
Y.B. Yang
L.F. Wei
The Conceptual Design of Table Jaw Based on Functional Principle Design
371(5)
J.Y. Zou
The Tolerance Optimization Design of Displacement Pump
376(4)
C.Y. Li
C.D. Ji
K. Ding
Customer Evaluation and Selection Method of Real-Time Innovative Design Based on the Network
380(4)
J.S. Luo
B.G. Wang
X.L. Wang
H. Cheng
Study of Regenerative Braking Model and Simulation of a Car
384(4)
F. Wang
Y.H. Wu
DFSS of a Diagonal Impeller
388(4)
X.X. Luo
X.X. Cai
G.S. Wang
D. Mi
A Fast Point-Sampled Model Denoising Algorithm for Product Design
392(5)
Y.S. Li
The Finite Element Analysis on the Crossbeam of Full Automatic Hydraulic Tile Press
397(4)
D.Q. Lv
Optimization of Micro Wind Turbine for Dental Fiber Handpiece Based on the Taguchi Method
401(4)
K.H. Hsien
S.C. Huang
Stress Analysis of the Adhesive Used in a Hard Disk Drive Bearing Assembly Using Finite Element Model
405(6)
P. Vengsungnle
K. Tangchaichit
Innovative Design of Hydraulic Driving Drum for Belt Transfer Machine
411(4)
X. Zhang
Y.B. Hou
J.H. Yuan
C.Q. Sun
Study on the Novel Spinning Technology of Broken Silk Fancy Yarn
415(5)
Y. Huang
J.Y. Zhong
J. Chen
L.L. Yang
X. Chen
H.L. Yi
An Investigation on Development of Seat Cooling Fan for Vehicle
420(4)
J.H. Kim
J.M. Seo
I.S. Jung
Design and Research on Wind-Solar-Diesel Hybrid Generating System at High Altitude
424(4)
L.B. Mao
W.J. Wang
B. Yi
Q. Dai
H.J. Mi
T. Yuan
A New Cast Stone Roller Kiln and its Combustion Control Approach
428(5)
J. Chen
A.J. Luo
Y.X. Yuan
C. Xiao
W.L. Wang
Z.X. Li
H.C. Li
B.P. Mao
Z. Chen
High-Efficiency Solar Power Supply Design
433(5)
H. Yang
W.Q. Huang
Z.F. Wang
L.G. Chen
Y. Yin
Simulation Research about Web Press Paper Tape the Second Time Tension Control Based on MATLAB
438(5)
Y.Q. Sun
Research on Ride Comfort of Nonlinear Vehicle Suspension
443(5)
Z.Y. Zhao
Z.H. Fan
J.J. Zhang
Z.Q. Xia
Collaborative Design Optimization of Main Movement System of Hydraulic Piston Engine
448(5)
D.L. Xue
H.X. Zhang
Y. Liu
Study on Torque Converter with Adjustable Guide Vanes of Hydrodynamic Speed-Adjusting Wind Turbines
453(5)
W. Cai
W.X. Ma
C.B. Liu
W.W. Du
Analyzing on the Principles of Intelligent Furniture Design
458(4)
G.Q. Zhang
J.J. Zhang
Analysis of Fabric Reconstruction Problem in the Apparel Production Design and Manufacture
462(4)
C.Y. Wu
Y.J. Zhang
C.F. Qu
L.B. Xu
Pilot Investigation on the Driving Posture Comfort among Malaysian Drivers
466(6)
M.S.A. Hussin
R.A.R. Ghazilla
M. Widia
Product Style Map --- An Effective Tool for Product Strategy Planning
472(7)
T. Han
S.Q. Sun
Chapter 2 Management and Production Scheduling
Research on Exhibition Logistics Information System Designing
479(4)
S.X. Zhang
The Intelligent Forecasting Method of Mine Equipment Maintenance Plan
483(4)
W.X. Huang
Flexible Job-Shop Scheduling Problem under Uncertainty Based on QPSO Algorithm
487(6)
F.S. Pan
C.M. Ye
J. Yang
Information on Risks and Prevention of the Supply Chain in E-Commerce Environment
493(4)
P.Y. Xu
The Architecture for Solving the Cross-Domain Keywords During New Product Development
497(4)
Y.C. Tsao
K.C. Hsu
Y.T. Tsai
Spare Parts Production Planning Model Based on Fuzzy Programming
501(6)
X.Y. Zhang
C. Liu
N.Z. Yang
Value Chain Theory and its Application in Steel Enterprises
507(4)
W. Dou
J. Shi
J.X. Wei
Business Process Management for Information System Implementation in Discrete Manufacturing Workshops Based on Multi-Agent Simulation
511(5)
S.Y. Zhang
Y.Q. Tan
T.H. Zhang
Research on Confidence Degree of Enterprise Alliance under the Environment of Network-Based Manufacturing
516(5)
X. Zhang
Scheduling to a Common Due Date on Unrelated Parallel-Machine with Deteriorating Jobs
521(7)
C.J. Hsu
The Research of Heuristic Algorithm for Flow Shop Scheduling Problem
528(4)
D. Tang
H.P. Shu
Research on the Application of Operation Characteristic Curve in the Sampling Inspection for Foods in Prepackages with Fixed Content
532(6)
L.X. Zhu
P. Lu
J.H. Wang
Z. Yin
J.X. He
Study on Coal Lean Mining Theory and Practice
538(4)
Z.X. Liu
A Multi-Issue Negotiation Based Task Allocation in Virtual Enterprise
542(7)
N.S. Hong
G.Y. Zhang
Chapter 3 Supply Chain
Introduction of-IOT Technology in a Logistic System for High-End Wine Sales
549(4)
H.D. Zhao
G.N. Liu
Q.Q. Guo
S.G. Ma
Y. Tie
C. Li
Study-on Supply Chain Performance Evaluation Method of Equipment Spare Parts
553(4)
H.Q. Gu
H. Song
C. Zhang
Optimization of Port Supply Chain Super Network under Electronic Commerce
557(5)
H.Y. Xie
X. Liu
D.P. Zhao
Study on Chinese Container Associates and its Construction Strategy
562(4)
S.L. Chen
Q.F. Wu
J.J. Sheng
Energy-Saving Technologies of WSN
566(4)
R.M. Zheng
Study of Container Transport Planning Model and Algorithm
570(4)
X. Zhang
J.S. Lin
Z. Zhao
Modeling and Optimization of Traceability System for Agriculture Products Supply Chain
574(6)
F. Li
Y.P. Zhu
H.R. Wu
Design of Manufacturing Logistics Service Platform in a Certain Area
580(7)
H.L. Zhao
Chapter 4 CAD/CAM/CAE
To Solve Mechanical Working Space by Applying Graphic Integration in ADAMS
587(5)
R.H. Zhang
Y.F. Zhu
S. Yang
A Rapid Design System for the Transmission System of Mounter Worktable Based on Second Development of Solid Works
592(4)
X.M. Li
W.H. Lu
X. Ning
G.C. Jin
T.C. Yu
Model and Finite Element Analysis of a Bus Body
596(4)
F. Wang
Q.M. Fan
Optimization Design of a Bus Body Frame
600(4)
F. Wang
Y.H. Wu
Modeling Method and Application in Digital Mockup System towards Mechanical Product
604(5)
H.Y. Zhang
J. Li
The Application of AutoCAD Software in Forestry
609(7)
L.J. Zhao
F.R. Li
W.W. Jia
A New Way of Virtual Prototype Design and Analysis for Tractor Steering System
616(6)
X.Y. Tang
D. Xiao
L. Liu
E.R. Mao
Z.H. Song
Y.K. Peng
Offshore Platform Deck Crane Fatigue Analysis Based on Abaqus
622(4)
S.Y. Wang
Q. Mei
L. Liu
Y.Q. Zheng
Simulation of Crank-Rocker Mechanism on Finite Element by ANSYS
626(4)
X.Y. Zhang
Characteristic Study on Temperature Field of Hydrostatic Bearing of Hydroforming Machine
630(6)
S.G. Wang
X.F. Du
D.S. Li
Q.M. Hu
Study on the Design Method of Testing Fixture for Bent Tube Based on UG
636(4)
X.J. Zhao
G.B. Pang
C.F. Yuan
M.J. Zhou
S. Li
Parameterized Modeling of Circumferential MEFP Warhead Based on Characteristics
640(6)
Z.G. Liang
J.W. Jiang
T.G. Zhang
Research on the Virtual Assembly-Disassembly and Repair of the Automobile Drive Axle
646(5)
H. Sun
W.G. Deng
3D Modeling and Motion Simulation of Single Surface Corrugated Machine Based on SolidWorks
651(5)
M.X. Yan
ANSYS Application in Modal Analysis of Bus Body Frame
656(4)
L. Xu
Calculation of Tilting Torque for Converter Based on Solidworks
660(4)
H. Guan
X.P. Ren
A Single-Phase Electric Harmonic Monitoring System Design Based on the Lab VIEW
664(5)
Z.J. Zhang
Optimization and Application of STL Model Slicing Algorithm in Rapid Prototyping
669(4)
C.X. Wang
Z.H. Li
Motorcycle Modeling with SimMechanics
673(6)
H.D. Wu
H.B. Xu
System Dynamic Characteristic Simulation of Spacecraft Propulsion System Based on AMESim
679(5)
Z. Yan
X.H. Peng
Y.Q. Cheng
J.J. Wu
Study on Parametric Assembly Modeling of Standard Parts with Assembly Level of Mold Based on UG Secondary Development
684(7)
M.J. Zhou
J.C. Zhang
X.J. Zhao
Q.Y. Ma
ANSYS-Based Finite Element of Rear Frame in Underground Transport Vehicle
691(6)
L. Sun
Chapter 5 Reliability, Fault Diagnostics and Quality Monitoring
The Common Mode Failure Analysis Based on Markov Model
697(6)
Y. Zhao
J. Jiao
Research on Intelligence Inspections of Gear Profile Deviation
703(5)
H. Zhang
Z. Xu
W. Fu
Research on Reliability Qualification Test of Mechanical and Electric Equipment Onboard
708(5)
Z.R. Xie
J.W. Lv
Z.H. Liu
Research on Fault Diagnosis for Bearing of CNC Machine Tools
713(5)
B.C. Zhang
X.J. Yin
Z.J. Zhou
Y.L. Zhang
Multiple Reference Impact Testing for Bridge Assessment with Drop Hammer
718(6)
Y.J. Liao
Y. Zhou
P. Qin
An Independent Component Analysis Based Defect Detection for the OLED Display
724(5)
Z.L. Wang
J. Gao
C.X. Jian
Y.C. Liang
Y. Cen
Fault Diagnosis of Valve Train of Internal Combustion Engine Based on the Artificial Neural Network and Support Vector Machine
729(5)
F.R. Bi
Z. Song
A Note on the Early Failure Period for CNC Machining Tools
734(5)
Z.C. Jia
Z.J. Yang
High Order Spectrum Characteristics of the Elevator Fault
739(5)
Y.K. Zheng
Y.J. Huang
Field Test of Wellbore Anti-Collision Monitoring System
744(6)
G. Liu
Q.Z. Yang
B.S. He
The PHM Research of Vessels Equipment Based on Condition
750(6)
C.J. Wang
Y.Z. Liu
H.J. Fan
Large Pendulum Shaft Failure Analysis and Countermeasure Research
756(4)
W.M. Lin
Y. Zhang
H.Y. Xiang
Z. Li
Electromagnetic Nondestructive Testing in Cracked Defects of Oil-Gas Casing Based on Ant Colony Neural Network
760(4)
W. Zhang
Y.B. Shi
Y.J. Li
The Research and Analysis on Valve Reliability of Reciprocating Compressor
764(5)
J.Q. Jin
G.L. Sui
H.T. Zhang
The Reliability Estimation of Double-Parameter Exponential Distribution on Zero-Failure Data
769(6)
J.M. Zhong
H.Y. Zheng
Application of Measurement System Analysis in Controlling the Gun Maintenance Quality
775(5)
M. Zhang
S. Wang
G.D. Wang
W. Jiang
Research on Parameter Distribution of Interval Deleted Data with Turnbull Estimation
780(4)
J.H. Wu
J.S. Wang
H.B. Liu
J.W. Lei
Stress Analysis of Ultra-Supercritical and Electrical Three-Way Valve Body Intensity in a High Pressure Heater Using FEM
784(4)
S.X. Li
J.H. Hu
L.C. Li
Credibility Measure and Assessment Method of Equipment Severity to Voltage Sag
788(5)
X.N. Liu
Y. Wang
X.Y. Xiao
Discussion about Circuit Board Fault Diagnosis Based on D Algorithm
793(4)
X.Q. Xing
Z.T. Yao
Research on Fault Diagnosis Based on TEAMS
797(5)
Y.H. Liang
Q.Y. Wu
D. Jin
Mechanism Movement Reliability Analysis of Galting Gun
802(4)
X. Han
Y.C. Bo
Q. Li
Y.J. Guo
Sensitive Equipment Failure Assessment Caused by Voltage Sags Using Interval Probability
806(5)
H. Li
X.Y. Xiao
Y. Wang
Tooth Surface Contact Fatigue Reliability Analysis of Cycloidal Gear Based on Monte-Carlo
811(4)
T.M. Guan
J.B. Li
L. Lei
Fault Location for Transmission Line with Shunt Reactors
815(4)
X.D. Liu
R. Guo
R.M. Zeng
Impacts of Protection Cooperation on Voltage Sag Frequency and Sensitive Equipment Trips
819(5)
L.P. Chen
X.Y. Xiao
Y. Wang
J. Jiao
Fracture Reason Analysis for Helical Gear Shaft of Converter Tilting Mechanism Senior Reducer
824(4)
L.K. Guan
N.N. Wang
Fault Diagnosis System of the Fire Control System Based on Fuzzy Neural Network
828(4)
P.J. Zhang
Y.C. Bo
H.Y. Wang
Q. Li
The Fatigue Life Research on the Crossbeam of Automatic Hydraulic Tile Press
832(5)
Y. Pan
The Fault Diagnosis Model of FMS Workflow Based on Adaptive Weighted Fuzzy Petri Net
837(7)
H.L. Pan
W.R. Jiang
H.H. He
Safety Analysis and Design of Wireless Monitoring System
844(7)
B. Qian
H.Y. Zhang
Chapter 6 Measurement Techniques, Technologies and Equipment
Recognition of Branch Insulation Parameters in Coal Mine Distribution Network using Least Squares Method
851(4)
J.W. Zhao
Application of Sliding Window-Genetic Programming Algorithm in Alert and Forecast for Mine Safety Monitoring
855(4)
R.H. Ma
X.H. Dong
J.L. Wang
Camera Calibration of Binocular Vision Based on Virtual ID Target
859(5)
Y.B. Guo
G. Chen
D. Ye
F. Yuan
The Electronic Measuring System Design of Identifying Freshwater Fish Meat with Different Freshness
864(9)
X.J. Yang
Z.H. Yan
PART 2
A Low Frequency and High-Precision Microbarograph Monitoring System
873(5)
L. Li
Z.H. Zhou
C.X. Lv
B. Liu
H.C. Zang
P.Y. Yao
J. Yuan
Z.L. Hua
Research on Key Technologies of the Needle Loom Condition Monitoring System
878(4)
H. Deng
B.T. Song
H. Liu
H. Zhang
S. Yang
Determination of Multi-Element in Egg of Poyang Lake Anas platyrhynchos by ICP-AES
882(5)
Y.G. Tu
Y. Zhao
Method of Disease Diagnosing Based on SVM and Rough Set
887(4)
B.L. Liu
L.X. Gao
The Design of Pressure Meter Based on Ultralow-Power Consumption Technique
891(4)
Z.Y. Xie
L.P. Zheng
H. Zhang
Road Load Spectrum Collection and Analysis of AMT Actuating Mechanism
895(4)
X.H. Zou
K. Qiao
X.H. Shi
Research on the Computational Algorithms for Layer Wound Linear Variable Differential Transformers
899(6)
L. Jiang
G. He
Classification of Floral Origins of Honey by NIR and Chemometrics
905(5)
X.Y. Liang
X.Y. Li
W.J. Wu
Modeling and Simulation of the Dissolved Oxygen Monitoring System in Aquaculture
910(5)
D.Z. Huang
Researches on the Size Measurement of Mechanical Parts Based on Image Processing
915(4)
H.J. Dong
H.J. Yang
G.H. Han
Feature Extraction of Leaf Images for Mite Disease in Cotton Fields
919(4)
Z.H. Diao
Y.M. Song
Y.P. Wang
H. Wang
Research of Ultrasonic Flow Detection Method Based on Hydrodynamics Analysis
923(6)
L.J. Sun
M.L. Liu
Y. Hou
Research on Non-Invasive Measurement of Optical Parameters of the Tissues by Support Vector Machine
929(4)
Y. Li
J.J. Xu
H.P. Liu
Determination of Trimethylamine in Air by Cataluminescence-Based Gas Sensor
933(4)
K.W. Zhou
C.X. Gu
X. Li
D. Su
H.Z. Yang
X. Shen
Monitoring and Research of Power Ultrasonic Honing Vibration Frequency
937(4)
X.Q. Xing
C.Q. Gao
X.J. Zhu
Granary Temperature and Humidity Detection System Based on MCU
941(4)
L. Jin
T. Zhao
Flow Rate Measurement Method and Apparatus of Thick Pastes
945(6)
S.Y. Zhang
Z.N. Wang
X.D. Hao
M. Wu
Principle Error Analysis of Three-Point Supporting Type Barycenter Measurement System
951(4)
Y.X. Hao
Y.H. Liu
S.W. Yang
H.T. Cheng
Design of Data Acquisition and Storage System for Digital and Analog Signal Based on FPGA
955(5)
H.L. Wang
H.R. Wang
H.F. Ding
Study on the Attenuation Behavior of Acoustic Wave in ER Fluid
960(4)
N.H. Yu
J.J. Fan
An Measuring and Evaluation Method of Coaxiality Error for Large-Scale Holes
964(4)
W.J. Xie
Vehicle Braking Efficiency On-Line Monitoring and Evaluation with MFDD
968(4)
W.L. Li
W. Zhou
L. Gao
FEM Study on the Dynamic Effects of CMM Geometric Errors
972(4)
Y.L. Chen
Y.N. Peng
Z.H. Wei
Design of Measurement System for Solid Propellant Kneading Machine's Pot Temperature
976(5)
X.L. Jin
S. Chen
B.J. Ma
Sizing System for Automatic Construction of Dress Shirt Patterns for Men
981(8)
Y.L. Choi
Structural Damage Detection of the Simple Beam Based on Responses Phase Space
989(7)
C. Cheng
Z.H. Nie
H.W. Ma
Wheat Sedimentation Value Determination Based on Near Infrared Spectroscopy
996(5)
L.J. Sun
M.L. Liu
L.L. Xu
X.F. Li
X.D. Mao
Automatic Identification of Crack in Ultrasonic Infrared Imaging
1001(6)
F.Z. Feng
C.S. Zhang
Q.X. Min
P.C. Jiang
The Curing Residual Strain Monitored by Fiber Bragg Grating Sensors
1007(5)
H. Tian
C.S. Ye
X.T. Bao
The Design and Implementation of the Terminal in a Vehicle Exhaust Real Time Detecting System
1012(4)
F. Lin
J. Yan
Z.Z. Ye
Y.J. Song
H.Y. Chen
A Test of Mtem' Application in the Iron Mine ahead to Explore the Water
1016(7)
X.H. Liu
P.S. Zhang
L.H. Sun
S. Chen
Research on the Utilization of Smart Meters' Information under the Background of Smart Grid
1023(4)
H.C. Guo
D.X. Niu
J.P. Liu
Z. Ma
A Sinusoidal Grating Design and Performance Analysis
1027(4)
B. Zhou
Z.Y. Liu
L. Rao
Method of Dynamic Detection for Clutch of Real Vehicle Based on RFID Technology
1031(7)
L.H. Yu
L.R. Wang
Research on Aerocraft Attitude Testing Technology Based on the BP ANN
1038(4)
Z.J. Liang
T.H. Ma
Research and Application of Portable Real Protection Potential Measurement System of Buried Steel Pipeline
1042(4)
X.F. Zhao
Application Research on Aqua-Sim for Underwater Acoustic Sensor Networks
1046(4)
T.Q. Liu
G.J. Han
C. Zhu
C.Y. Zhang
The Insights of Node Deployment for Localization Accuracy in Underwater Acoustic Sensor Networks
1050(4)
C.Y. Zhang
G.J. Han
C. Zhu
T.Q. Liu
Application of Self-Calibration in Flatness Assessment
1054(4)
T.T. Guo
X.X. Wang
H. Zou
B. Hong
J. Zhao
M. Kong
Determination of Residual Organic Solvents in Antitumor di-phenyl-di-(2,4-dichlorobenzohydroxamato)tin by Capillary Gas Chromatography
1058(5)
L.L. Miao
Y.E. Li
Y.L. Li
Q.S. Li
The Design of Real-Time Power Detection System in Communication Equipment
1063(5)
X.J. Yi
J.X. Jiang
D.W. Guo
D.F. Zhang
Research on Frequency Conversion & Selective Measurement and Error Correction Algorithms in Grounding Characteristics Measuring System
1068(6)
S.Q. Wang
X.W. Chen
Z.J. Guo
X. Wang
Identification Research on CMP Multi-Zones Pressure System
1074(6)
Y.W. Wen
X.C. Lu
H. Zhang
K. Zhou
P.Q. Ye
Measurement of Spacecraft Simulator Motion Parameters Based on Multi-Vision System
1080(5)
Y.B. Guo
H.P. Ma
Q. Xia
G. Chen
F. Yuan
The Radius of an Ultrashort Pulsed-Laser to Fresnel Diffraction of a Serrated Aperture
1085(4)
H.S. Wang
Study on the Online Dynamic Weighing System of Heavy Duty Apron Feeder Based on Labview
1089(5)
Q.G. Deng
H. He
B. Hu
A Least Square Solution for Energy-Based Source Localization in Sensor Networks
1094(5)
N. Jiang
W.B. Ai
Design of the Time Interval Generator Automatic Verification and Management System
1099(6)
Y.J. Fu
X.B. Hou
A Height Estimation Method Based on Joint Time Delay and Phase Estimation for Wideband InSAR or InSAS
1105(8)
S. Zhang
J.S. Tang
H.P. Zhong
Chapter 7 Dynamic Analysis of Mechanical Systems and Mechanical Transmissions
A Study on Drive Capstan Stiffness of Cable-Driven Picking Manipulator
1113(7)
H. Luo
Y.G. Tang
J. Shen
Structural Vibration Control of the Magnetic Flywheel Based on GA-PID Neural Network
1120(5)
H.Y. Fu
P.F. Liu
Q.C. Zhang
G.D. Li
D.B. Dong
Dynamic Analysis of Variable-Step Feeding
1125(5)
P.F. Chen
J.F. Cai
S.B. Xu
Vibration Characteristic Similarity Appraisal of Conticaster Vibration Table
1130(4)
W.Z. Yang
Z. Cui
X.P. Ren
E.Q. Su
The Abnormal Vibration Source Analysis of Automobile Drive Axle
1134(4)
C.H. Yang
N.C. Guo
H.S. Song
W.K. Shi
Study on the Non-Linear Dynamic Stability of a Cracked Rotor System
1138(4)
S.Q. Lv
L. Tian
G.W. Zhao
Enclosure Active Structure Acoustic Control Based on Multi-Agent System
1142(7)
Z.C. Li
L.N. Gu
N. Chen
Effect Factors Analysis of Flow Generation Noise from Muffler Element with Inserted Tube
1149(5)
H.J. Zhao
H.X. Wang
J.D. Chang
Q. Li
L.P. Tian
Study on Impact of Powertrain Mounting Stiffness on Vehicle Vibration Characteristics
1154(4)
Y.Z. Men
H.B. Yu
H. Wang
L. Xu
Research on Influence of Intertooth Space Confriction to Transmission Efficiency under EHL
1158(6)
W.H. Liang
K. Liu
X.L. Liu
Y.H. Cui
A Vibration Analysis and Evaluation System Construction Based on On-Line Inspection
1164(4)
Y.C. Xia
Vibration Transfer Analysis of High Speed Train Considering Car body Flexibility
1168(4)
T.L. Chen
J. Zeng
Y.H. Lu
L.M. Zhang
Dynamical Analysis for Mechanical Arm of the Coal Sampling Machine Based on Rigid-Flexible Coupling Model
1172(4)
L.L. He
R.L. Li
A Modal Analysis of Eccentric Shaft of Caster Vibration Device
1176(5)
J.L. Shi
X. Yang
D.D. Ma
The Development of Structure Random Vibration Parameter Analysis Tool Software under Hot Environment Condition
1181(9)
G.Q. Wu
X.L. Han
J.M. Du
L. Li
C.M. Hu
Virtual Prototype Modeling and Dynamic Simulation for a Large Pendulum
1190(4)
W.M. Lin
Y. Zhang
H.Y. Xiang
B.A. Han
Study on Dynamic Simulation of Hydraulic Die Forging Hammer Based on VPT
1194(4)
Y.J. Zhang
Research of Dynamic Performance of Reciprocating Compressor Valve
1198(5)
J.Q. Jin
G.L. Sui
D.Y. Shen
Vibration Modal Analysis of the Upper Frame of Hydraulic Excavator
1203(4)
C.P. Zuo
Y.Q. Zhou
R. Huo
L. Wang
H. Li
Analysis on Structure Stress Characteristics of Top and Low Slewing Frame of Tower Crane
1207(5)
B. Li
H.D. Liu
B. Cai
Z.L. Song
Analysis of Local Stress and Vertical Deflection of Down Chord of Inverted Triangle Cargo Boom of Tower Crane
1212(5)
B. Li
Z.L. Song
Y.X. Ke
H.D. Liu
The Design of Transmission Scheme of the 6-Speed Automatic Transmission Based on the 01N Automatic Transmission
1217(7)
M.F. You
Q. Wen
M.F. Zheng
Z.W. Li
Analysis on Dynamic Characteristics of Paper Feeding Device
1224(6)
Y. Huang
J.F. Cai
R. Xie
Dynamic Simulation and Analysis of a Dual-Link Suspension
1230(6)
J.Z. Feng
L. Liu
S.L. Zheng
D.W. Gao
T. Sun
Dynamic Performance Analysis for Milling Head Box of Spiral Drill Collar Machine
1236(4)
K. Wang
Y.X. Song
X.W. Sun
Analysis and Modeling of Error Sources for Spiral Bevel Gear Honing Machine Based on Multi-Body System Theory
1240(4)
G.Z. Zhang
J. Han
Y.Y. Liu
Optimization Method of the Rubber Elastic Element Structure Based on the Vibrational Power Flow
1244(5)
W.W. Liu
J.J. Lou
H.P. Wu
Transmission Study on Dynamic Characteristics of Front Suspension LCA Bushing
1249(4)
L.E. Peng
R. Guo
The Study on Experimental Modal Analysis of High-Speed Rotational Shaft
1253(4)
J. Zhao
J.C. Yuan
Modal Experiment and Analysis of Needle-Punching Machine
1257(4)
Z.L. Tang
J.C. Yuan
The Performance Study of Three-Ring Gear Reducer
1261(4)
Y.K. Liu
Y.L. Wei
Influence of Top-Structure Form of Tower Crane on the Factor for Hoisting a Grounded Load
1265(5)
Y.J. Xia
W.M. Mei
Q. Miao
Research on the Dynamic Characteristic of the Bogie in Dynamic Track Stabilizer on Working Conditions
1270(4)
L.H. Wang
G.W. Liu
Y.Y. Huang
Dynamic Analysis of a Free-Free Beam
1274(6)
G.C. Han
Y.H. Wu
F.G. Bian
C. Liu
Research on Involute Master Measuring Apparatus
1280(4)
Q. Liu
Y. Ma
S.Y. Ling
Q.M. Wang
Dynamic Analysis for New Low-Speed Motor with Interior Pushrod Harmonic Transmission Device
1284(4)
X.L. Yang
J.F. Liu
J.C. Zou
W. Ding
Methods for Determining the Dynamic Load of the Shipbuilding Gantry Crane
1288(7)
X.Y. Qian
C.B. Yin
F. Ma
Distribution on Transmission Ratio of Cylindrical Gear Reducer
1295(6)
L.L. Zhu
G.X. Wang
Chapter 8 Fluid Power Transmission and Control
The Electro-Hydraulic Proportional Technology-Based Experimental Research into Gradually Pressurization System on Cotton Lap of Roll Machine
1301(6)
J.Q. Yu
J.C. Yuan
Finite Element Stress Analysis of Intersection Region of Nozzle and Blind Flange
1307(4)
J.H. Dong
B.J. Gao
Research on Optimization of Flow Field in 60t Tow-Strand Tundish by Hydraulic Model
1311(6)
J.J. Zhang
W.F. Gao
Z.G. Pen
Design and Analysis of Hydro-Viscous Winch Hydraulic System
1317(5)
Q.R. Meng
S.F. Lin
J. Wang
Hybrid Excavator Test Bed Hydraulic Load System Design
1322(4)
Z.H. Huang
H.W. Gao
Y. Xie
Research on Pneumatic Performance of Aero-Engine Blades through Function Method
1326(4)
W.S. Liu
Y. Sun
G.D. Shi
X.L. Liu
Study on De-Icing Fluid Pump Station's Flow Pulsation Suspension Methods
1330(5)
L.W. Wang
Y.S. Long
Z.W. Xing
Simulation of the HCCI Combustion Based on Single-Zone Combustion Model
1335(5)
Y.S. Jin
J.S. Lin
Z.S. Yan
Design and Implementation of the Integrated Test Platform for the Hydraulic Components
1340(5)
Z.H. Liu
Q.L. Zeng
C.L. Wang
H.X. Kang
Prediction Model of Control Valve Characteristics
1345(5)
Y.D. Xie
Y.J. Liu
Y. Wang
Numerical Simulation of Convection Heat Transfer in a Plate Channel with Sintered Copper Porous Ribs
1350(6)
X.W. Lu
D.Z. Yang
W.J. Cao
Z.Y. Zhou
Theoretical Study of Transmissivity of Electromagnetic Wave in Magnetorheological Fluids
1356(4)
Y.Q. Wan
J.J. Fan
N.H. Yu
Research on Maximum Wind Energy Capturing of DFIG
1360(4)
H.H. Song
D. Tian
The Research of Internal Fluid State Influence in the Divergency of the Straight Cone-Shape Draft Tube
1364(5)
Y. Lin
S.R. Han
D.C. Zhang
Fluid Field Analysis for Cyclone Separator Used on Grain Cleaning
1369(3)
L.X. Geng
L.J. Zhang
Q.X. Shi
Impeller Finite Element Analysis of Extractable Explosion-Proof Contra-Rotating Axial Fan for Mine Local Ventilation FBDC
1372(7)
Q.D. He
W.Q. Yu
S.F. Xiao
Chapter 9 Mechatronics
A Linear Macro/Micro Platform Design Based on FEM Simulation
1379(8)
L.F. Zhang
Z.L. Long
J.W. Fan
Z.C. Wang
J.Z. Yang
The Effect of Electrode's Material on Immobilization of Sulfite Oxidase Enzyme in Construction of Sulfite Biosensors
1387(4)
A. Ghoseyri
A. Farahbakhsh
S. Khakpur
N. Hosseinfakhrabadi
A Human Half-Top Kinematic Motion Tracking System Based on Disparity Information of Streo Camera
1391(4)
Y. Kim
S. Jun
Map Matching-Aided In-Motion SINS Initial Alignment
1395(7)
G.W. Zhang
J.B. Chen
C.L. Song
T.T. Wang
Modeling and Design of 3D Visualization on Giant Magnetostrictive Actuator
1402(6)
F. Zeng
J.J. Lou
S.J. Zhu
A DSP-Based Control System for Precision Variable Rate Fertilization
1408(7)
X.Y. Tang
Y.Z. Chen
Y.K. Peng
X. Wang
Y. Xu
W.L. Yang
W. Wang
Design of a Type of Cleaning Robot System
1415(4)
H. Peng
Z.C. Huang
Analysis of the Biomechanics of the Fingers in Different Writing Stances
1419(4)
M.C. Tsai
S.C. Huang
Modeling of Five-Axis Linkage WEDM for Complex Curved Surface and its Simulation
1423(4)
X.R. Wang
P. Wang
Y.C. Cui
T. Han
The Study of 3-D Magnetic Field Finite Element Analysis for Giant Magnetostrictive Actuator
1427(4)
F. Zhang
Z.X. Ma
S. Gao
Development of a Precision Micro-Assembly Machine for ICF Targets
1431(5)
W.R. Wu
D.H. Yu
L. Zhang
Z.R. Qiu
X.H. Huang
Development of Integrated Testing Instrument for Mechatronic System
1436(4)
B.L. Liu
L. Lei
High-Temperature Capacitive Mode Pressure Sensor Based on SiC
1440(4)
H.Y. Yu
H.J. Lv
W.Z. Song
Z.B. Yang
M.H. Pang
Characteristics Ansys of Hydraulic Cushion for High-Speed & High-Precision CNC Lathe
1444(4)
L.P. Liu
Q.Q. Gao
G.H. Deng
Optimization Problem Research for Machining Accuracy and Cost of CNC Lathe Based on Adaptive Particle Swarm Optimization
1448(5)
W.W. Liu
Y. Zheng
The Navigation and Positioning Method of Active plus Passive Ultrasound-Guided Robot for Liver Cancer Coagulation Therapy
1453(7)
Y.Y. Cao
B.J. Qi
S.X. Wang
W.T. Cui
Sensitivity Analysis and Numerical Simulation of the Planar Mechanism Kinematic Accuracy
1460(5)
R.J. Zhang
Q.X. Jia
L. Meng
J.W. Qiu
The Kinematic Modeling of a 2-DOF Rotational Parallel Fixture
1465(4)
S.L. Cai
W.T. Huang
L.B. Peng
Design and Realization of Helical Rotor NC Automatic Programming System
1469(5)
F. Chen
L.Y. Gu
Y. Yang
C.Y. Jia
Design of AMT Hydaulic Shift System Based on the Logical-Shift Formula
1474(4)
T. Mei
J.J. Li
Fuzzy Adaptive Terminal Sliding Mode Control for Attitude of Flapping Wing Micro Aerial Vehicle
1478(5)
W.H. Lu
S.B. Hu
J. Wei
D.M. Cao
Novel Compensator for Aircraft Electromechanical Actuator
1483(5)
N. Wang
Y.J. Zhou
Research on Magneto-Rheological Torque Servo Devices
1488(4)
G.F. Li
M.Z. Han
C.Y. Shan
J. Liu
J.X. Yang
Study on Tilt Properties of Orifice-Compensated Aerostatic Thrust Bearings
1492(4)
L. Wei
M.M. Deng
Research on the Internal Model Decoupling Control of High Speed Spindle
1496(6)
Y.S. Li
J. Meng
Y. He
Path Recognition Method for Vision Navigation of Tobacco Harvester
1502(4)
Y. Li
Z.X. Guo
W.S. Wei
Research of CNC Automatic Programming Method Based on Process Database
1506(5)
J.H. Tao
X.J. Fei
M.Y. Zhu
X.C. Liu
H. Liu
Error Analysis of a 2-PRS/2-UPS 4-DOF Parallel Platform
1511(4)
S.L. Cai
L.B. Peng
W.T. Huang
Dynamic Analysis of Key Parts of CNC Milling Machine Based on FEM
1515(4)
W. Cong
Z.Y. Zhang
J. Li
E.X. Han
Finite Element Analysis of Milling Head Box of CNC Machine Tool
1519(4)
L. Sun
X. Wang
Statics Analysis for the Crossbeam of Large Gantry CNC Machine under Six Working Conditions
1523(4)
X.L. Deng
W.M. Yang
J.C. Wang
Automobile Frame Side Rail Detection System Based on Machine Vision
1527(4)
Y.Z. Men
H.B. Yu
H. Wang
J.G. Gao
X. Pan
A Practical Algorithm for Ball-End Mill Using a Five-Axis CNC Grinding Machine
1531(6)
X.J. Sun
F. Tang
X.H. Wang
The Application of PLC in the Stepper Motor Closed-Loop Control System Design
1537(4)
X.Y. Wang
Dynamic Analysis and Structure Improvements on Machine Tool Bed
1541(6)
L. Sun
M.H. Wang
B.F. Shan
J.L. Bai
H. Zhou
Chapter 10 Industrial Robotics
Structural Design of the Robot Arm for Massage Based on the Chain Drive
1547(5)
Z.L. Wang
Q. Liang
B.C. Zhang
Temperature Uniformity Control in the Low Pressure Process Champer of the IC Equipment
1552(5)
H. Huang
T.N. Yang
C.M. Li
Q.L. Zhang
Z.D. Huang
Study on Two-Step Method for Robot Dynamics Parameters Calibration
1557(6)
Q.X. Jia
T. Li
G. Chen
The Path Optimization of Spray Painting Robot for Two Path Pattern
1563(5)
K. Teng
Y. Zeng
Analyzing Moving Character of a Novel Parallel Mechanism
1568(5)
H.J. San
Y.M. Wang
J.X. Liu
Forward and Inverse Position Solution Analysis of 2UPR/1SPR 3-DOF Parallel Mechanism
1573(4)
H.J. San
Y.M. Wang
J.X. Liu
A Hardware & Software System for Unmanned Ground Vehicle Control with Robotic Arm & Color Detection
1577(6)
M.S. Rahman
M.S.U. Chowdhury
M.A. Wazed
M.M. Roshid
Robust Adaptive Sliding Mode Synchronous Control for a Planar Redundantly Actuated Parallel Manipulator
1583(6)
Y. Long
X.J. Yang
Research on Pneumatic Control System of Box Unfolding and Closing Mechanism of Horizontal Type Boxing Line
1589(6)
C.W. Chai
J.F. Cai
Path Planning with Motion Optimization for Car Body-in-White Industrial Robot Applications
1595(5)
P. Bozek
K. Trnka
Industrial Robot Control Using Inertial Navigation System
1600(5)
T. Pinter
P. Bozek
Application of Optimized BPNN Based on QGA in PID Control of Coal Mine Detection Robots
1605(4)
Y.Y. He
Z.G. Niu
An Introduction to Parallel Robot Mechanism
1609(4)
Z.Y. Xue
Ant Colony Optimization Based on Local Optima Breaking Mechanism for Unmanned Vehicle Path Planning in Cross-Country Environment
1613(6)
M.Y. Feng
H. Li
Y. Yuan
J. Cao
Study on Genetic Fuzzy Wavelet Neural Network Controller of Robotic Manipulator
1619(6)
Y.L. Wang
D.Y. Wang
A New Design of Programmable Multi-Axis Controller
1625(5)
Y.Z. Hu
Q.Z. Zhu
A Robot Vision System in ABU Robocon Contest: Visual Servoing Navigation and Object Tracking
1630(9)
X.H. Li
P. Zhang
S.N. Lin
Chapter 11 Control Technologies and Intelligent Systems
Duffing Chaotic System Stability Control Based on Sliding Mode Control
1639(4)
D. Ma
An Intelligent Water-Saving System
1643(4)
Y.P. Yang
H.H. Weng
Study on Data Detector of Synchro-Self-Shifting Clutch on Combined Diesel or Gas Turbine Power Plant
1647(4)
Y. Tian
K.L. Wang
Y.F. Zhang
S.Y. Li
The PLC Control System of Box Processing Combined Machine Tool
1651(5)
L.Y. Li
Parameterization of Emotion Expression through Robot's Body Language
1656(5)
T. Sapsaman
T. Benjawilaikul
The Effect of Hexa-Orientation Press Control System Development on Diamond Material Grade
1661(4)
H.Y. Hua
Z. Zhang
Multi-Echelon Integrated Inventory Control Strategy of Equipment Spare Parts
1665(5)
H.Q. Gu
C. Zhang
Q. Shi
Research on Vacuum Consumable Are Remelting Furnace Control System with Drop Short Pulses Testing
1670(5)
G.Y. Lv
S.X. Hu
A System of Multistep Self-Learning Forecast and its Application on Oil Refining Industry
1675(4)
J. Chen
Application of Critical-Siphon Theory to Fastest Deadlock Controller for a Class of Flexible Manufacturing Systems
1679(4)
J.K. Chiang
D.Y. Chao
Remote Monitoring System on Mining Visualization
1683(4)
Y. Yang
Y.L. Li
J. Li
The Analysis of Soft Starting System of Brushless Excitation Synchronous Motor
1687(5)
X.Z. Yang
G.G. Cheng
Based on Adaptive Control in the Process of the Liquid Level Instrumentation Control System Design
1692(4)
M.M. Cai
The Design of AGV Control System and its Application in Printing Center
1696(4)
P. Zhang
An Exception Handling Approach for Service-Based Business Processes
1700(5)
Z.M. Shang
The Research on the Intelligent Control of Geographic Information System Design to Agricultural Production
1705(5)
S.R. Wang
J.S. Zhao
S.Z. Lei
The Vehicles ESP Safe Test System Based on Aid Wheels Breaking Control Vehicle System
1710(7)
L. Zhang
G.Y. Wang
F.Z. Yu
Z.F. Zhang
Design and Implementation of Remote Monitoring System for UPS in Unattended Observation Station
1717(5)
X.F. Tian
X. Zhang
L.L. Zhao
Quantum Artificial Bee Colony Algorithm for Knapsack Problem
1722(7)
Z. Liu
Y.A. Hu
Research on Control Technology of Hydro-Viscous Winch
1729(5)
Q.R. Meng
J. Wang
S.F. Lin
A Chaotic Cellular Neural Network System Research and Implementation Based on FPGA
1734(7)
Z.P. Chen
P.F. Cai
E.Z. Dong
PART 3
Research on Cogent Automatic Fingerprint Identification System
1741(7)
R. Zhang
F. Wang
An Improved Fast Intelligent Tracking Algorithm with the Gain Adjustable
1748(5)
D.S. Si
X.X. Wang
C. Chen
The Research and Design of Smart Home Based on Virtual Reality Technology
1753(4)
K. Yang
Development of Full-Automatic Flap Disc Production Machine Based on PLC Control System
1757(4)
D.H. Tang
W.J. Feng
D.Y. Lu
Research on Influencing Spreading Model of Road Congestion Based on Traffic Flow and Cellular Automata Approaches
1761(4)
Y.Z. Men
H.B. Yu
X.S. Li
H. Wang
L. Xu
Pole-Placement for Multi-Input Linear Systems by State Feedback or State-Derivative Feedback
1765(4)
Z.H. Gao
X.C. Ye
The Design of the Monitoring System Based on Marine Environment Buoy
1769(3)
X.H. Kuang
Z.Y. Wang
C. Yang
H.B. Huo
Y.X. Wu
Automatic Liquid Level Detection System Based on Lab VIEW
1772(4)
L. Yu
W.N. Liu
H.H. Wu
A New Intelligent Device Used for Monitoring Environment Safety
1776(5)
C.J. Wang
Y.Z. Liu
L. Ma
Quasi-Likelihood Deconvolution of Non-Gaussian Non-Invertible Moving Average Model
1781(7)
M.S. Zhang
J. Huang
The Flow Ratio Process Control System Design Based on Improved PID Algorithm
1788(4)
D.Y. Luo
Y.F. Chen
P. Wang
F. You
Research of Coke Rate Prediction of Blast Furnace Based on Operative Characteristics of Auxiliary Resources
1792(6)
Y.H. Wang
H. Zhang
Z.G. Jiang
G. Zhao
Design of Chemical Water Treatment Control System Based on Quantum PLC
1798(4)
Z.Y. Ye
Research on Intelligent Elevator Control System
1802(4)
X.M. Jiang
Z.X. Hua
Y.N. Rui
Application of the PID Control in Mine Calorific Value Regulating System Based on PLC
1806(4)
X.M. Liu
S.Q. Wang
Identification and Control Design of Fuzzy Takagi-Sugeno Model for Pressure Process Rig
1810(9)
A. Subiantoro
F. Yusivar
B. Budiardjo
M.I. Al-Hamid
A Merging Method for Siphon-Based FMS Maximally Permissive Control with Simple Structures
1819(4)
D.Y. Chao
Y.L. Pan
The Application of Fuzzy Smith-PID Controller on Geothermal Air Conditioning System
1823(4)
L. Li
L. Ai-Lian
Research on Automatic Testing System of Vehicles Steering Angle
1827(4)
H.D. Fu
Z.Z. Wang
Improvement of Set-Covering Weighted Control Model of S3PR
1831(5)
D.Y. Chao
Y.N. Lien
J.T. Chen
Y.Y. Shih
Research and Application of Automation Controlling System for Plate Ultra Fast Cooling Process
1836(5)
X.L. Chen
B.X. Wang
Y. Tian
G. Yuan
Z.D. Wang
G.D. Wang
Structures for Weakly Dependent Siphons of S3PR
1841(4)
D.Y. Chao
J.T. Chen
Stability Analysis of Quantized Feedback Control System
1845(6)
D.S. Luo
X.K. Hu
Y.W. Feng
Intelligent Algorithm in Automatic Fire Alarm Application
1851(4)
Y.Q. Wang
Y.W. Wang
C.M. Pei
X.Q. Yang
H.R. Ye
The Design of Dynamic Response System Based on Digital Emergency Plan
1855(6)
W.D. Huang
B.L. Ding
L. Yan
Parallel PSO-Based Optimal Strategy Study of Energy Efficient Operation Control for Train
1861(5)
H. Hu
The Improvement of Control System of Wind Turbine Gearbox Test Device
1866(9)
X.L. Li
D. Liu
C.X. Wang
Chapter 12 Electronic and Microelectronic Technology
Design of a SoC With High-Speed DDC for Software Radio Receiver
1875(5)
J. Deng
L.T. Liu
Y.J. Li
X.Z. Huang
X. Huang
L.C. Liu
The Application Study of Multifunctional Injuries-Simulating Platform
1880(6)
W.W. Sun
K. Chen
X.H. Xu
M.T. Mi
Multi-Band Antenna of Mobile Handset with Metal Frame for Wireless Communication
1886(4)
L.B. Kong
S.S. Zhong
Spacial Filter of Weighting Method Based on Spectrum Analyse
1890(7)
X.M. Li
G.M. Huang
D. Xia
One Kind of Study of the Even Charge-up Method of Intelligence for Common Storage Battery Group of UPS
1897(5)
H.N. Yu
Experimental Analysis on Initial Are Column Voltage Gradient in Fuse Filled with Silica Sand
1902(6)
Y.Y. Xiao
J.W. Zhuang
B. Chen
J. Wu
A Effective Equalization Based on Multi-Mode for Series Grouped Battery Strings
1908(5)
S.M. Zhang
L. Yanig
Design and Implementation of Robot Soccer Communication Protocol Based on Ant Colony Algorithm
1913(6)
Y.L. Liu
Z.Z. Chen
Design of the Equalizing Charge Circuit Based on Bidirectional Energy Transfer
1919(5)
H.J. Liang
Y. Zeng
K.P. Xu
Z.W. He
M.Y. Gao
A Novel Three-Port Combiner Based on Coaxial Cavity
1924(5)
S.N. Zhang
Q. Ye
C.W. Luo
Development of Uphole Monitor for MWD in Underground Directional Drilling in Coalmine
1929(5)
L.P. Wang
J. Gao
J.M. Zhang
Z.J. Shi
An Opto-Electronic Image Sensor Using for Low-Light-Level in Neutron Digital Radiography(n-DR)
1934(5)
A.M. Zhang
B. Wei
P. Feng
D.L. Mi
Y. Ren
Application of Kalman Filter in SOC Estimation of Power Lithium-Ion Battery
1939(5)
C. Zhao
X.K. Chen
Poly-NiO/Nb:SrTiO3 Based Resistive Switching Device for Nonvolatile Random Access Memory
1944(4)
C. Hu
Y.D. Zhu
Design of Counting Device for Contact IC Module
1948(4)
L.L. Wang
The Improved Design of Engine Ignition System
1952(7)
J. Zhao
T. Zhang
J.X. Su
G.M. Luo
A Parallel Space-Time Block Code Based Transmission Scheme
1959(6)
F. Hu
L.B. Jin
J.Z. Li
Research for Biofouling Detection Based on Optical Fiber Self-Referencing Technique and ANN
1965(7)
H.P. Ma
Y.B. Guo
Y.Q. Jin
F. Yuan
Synchronization and Anti-Synchronization of the Chaotic Modified Chua's Circuits via a Same Controller
1972(4)
J.C. Leng
R.W. Guo
Research on UCAV Communication Data Link Capability Increasing Scheme
1976(4)
L. Deng
X.C. Zhou
D.W. Ma
H.J. Zhai
On Application of LDPC Coded Modulation in Optical Fiber Communication
1980(4)
Z.X. Wang
P.X. Wang
Design and Implementation of Radio Spreading-Sequences Beacon Based on Quadrature Frequency-Conversion
1984(5)
J. Xue
J.H. Zou
Y.L. Zhang
X.B. Fang
Design of High-Speed Remote Image Data Storage Memory Based on LVDS
1989(5)
H.X. Zhang
Z. Guo
Y. Ye
Polarization Changes of Elliptically Polarized Laser Beams Propagating in Slant Path through Turbulent Atmosphere
1994(5)
M. Gao
W.N. Nan
H. Lv
The Research and Analysis about Attenuation Characteristics of Wireless Signal in Limited Space
1999(6)
J. Ma
X. Ying
The Intelligent Design of Solar LED Street Lamps Based on MCU
2005(4)
L.M. Li
L. Zhang
Y.F. Zhang
Design of Automobile Exhaust Wireless Monitor System Based on GPRS/GSM/GPS
2009(5)
Z.Z. Ye
J. Yan
F. Lin
Y.L. Zhang
H.Y. Chen
Design of Azimuth-Sign Wireless Autonomous Positioning System
2014(5)
G.F. Pan
J. Wang
J. Xue
Y.L. Zhang
S. Liang
A Highly Directional Light Emitting Diode Light Guide Bar Based on Concave V-Grooves
2019(4)
C.F. Chen
B.H. Lin
S.H. Kuo
A Low-Distortion Single Fingerprint Acquisition Optical System
2023(4)
Z.M. Wu
X.P. Yang
H.B. Xie
Z.H. Chen
F. Li
B. Li
L.L. Cao
The Anomalous Threshold Voltage Prediction by Grey Model GM(1,1) for Submicron MOSFETs
2027(4)
S.L. Chen
D.Y. Shu
The Light Extraction Efficiency Enhancement in Organic Light-Emitting Diodes with Substrate Modifications
2031(4)
C. Wang
J. Wang
K. Yuan
L. Yu
High Efficiency Performance of Stack-Gate 0.35um P-Channel Flash EPROMs
2035(4)
S.L. Chen
D.J. Tseng
Three Dimension Thermal and Mechanical Simulation of Microbolometer to Detect Terahertz Wave
2039(6)
L. Yu
J. Wang
K. Yuan
C. Wang
Simultaneous Synchronization and Anti-Synchronization of the Two Identical BVP Oscillators
2045(4)
J.C. Leng
R.W. Guo
A Mobile Computing SoC Design
2049(4)
X.W. Liu
L.M. Liu
Design and Simulation of High Gain X-Band Horn Antenna for Calibration
2053(4)
Y.L. Zhang
G.F. Pan
J. Xue
Y. Xie
S. Liang
The Special Research on a Low Noise Amplifier
2057(5)
X. Yin
Y. Yao
J.L. Jia
Use of the Fuzzy-Based Taguchi Method for Improving the Yield of BGA Packaging
2062(7)
K.H. Hsien
S.C. Huang
Chapter 13 Embedded System
The Contactless Card Reader Based on Microcontrollers
2069(4)
X.W. Liu
L.M. Liu
The STM32 and Programmable Power Supply Communication in the ELID Grinding Dynamic Control System
2073(6)
Y.Q. Zhu
Z.F. Hu
B.J. Ma
Embedded Measurement Platform Design for Mine's Dynamic Weighing Bridge
2079(4)
C.X. Zheng
J. Chen
The Development and Application of the Basic Functions of the EMS of Four-Cylinder Gasoline Engine
2083(4)
Y.J. He
Y. Wang
F.Y. Song
B. Hong
X.L. Li
The IP Design for a Customized Mobile SoC
2087(4)
X.W. Liu
L.M. Liu
Embedded Systems to Build Modern Automation and Manufacture
2091(4)
X.W. Liu
L.M. Liu
An FPGA Based Frame Rate Enhancer for LCD Display in Embedded Systems
2095(5)
K.P. Xu
J.Y. Huang
H.J. Liang
Z.W. He
M.Y. Gao
Study of Embedded Power Environment Remote Video Monitoring System
2100(7)
Y.Q. Wang
Y. Hu
X.Q. Yang
H.R. Ye
C.M. Pei
Chapter 14 Signal and Intelligent Information Processing
Signal Separation Based on Focused Neural Network Filter
2107(4)
X.M. Li
J.M. Lv
Adaptive Reconstruction Based on Romp Algorithm
2111(6)
X.H. Xu
D.F. Chen
Moving Target Detection Based on Principle of Connectivity and Texture Gradient
2117(4)
M. Huang
Y. Zhang
G. Chen
G.F. Yang
Shadow Detecting and Shadow Interpolation Algorithm for InSAS
2121(5)
S. Zhang
M. Chen
J.S. Tang
A Robust and Rapid Image Preprocessing Method for Finger Vein
2126(5)
J.B. Xie
T. Liu
Z.Z. Huang
P.Q. Li
W. Yan
Weight to Vision Neural Network Information Processing Influence Research
2131(6)
C.H. Yin
J.W. Chen
L. Chen
Particle Swarm Optimization Least Square Support Machine Based Missing Data Imputation Algorithm in Wireless Sensor Network for Nuclear Power Plant's Environmental Radiation Monitor
2137(8)
S. Gao
Y.G. Tang
X. Qu
Research on the Edge Detection Method of the Rice Leaves Image Based on Phase Consistency under the Complex Environment
2145(4)
L.B. Liu
C.J. Zhao
H.R. Wu
R.H. Gao
A Hybrid Method to Search the Optimal Hamiltonian Circuit
2149(6)
Y. Wang
W. He
D. Tian
Morphological Reconstruction Based Segmentation of Lung Fields on Digital Radiographs
2155(5)
B.Y. Zhu
H. Chen
Coordination Method on Cloud Computing Clusters
2160(4)
Z. Xu
The Method of Feature Extraction of Weak Multi-Frequency Signals Based on the Array of Modulated Stochastic Resonance
2164(7)
S.L. Tu
Z.Y. Wu
Z.Y. Wu
The Fusion Process of RS(Remote Sensing) Data Based on Wavelet Neural Network
2171(4)
L.M. Zhang
X.Q. Zhao
Research on the Optimized Algorithms on Neural Network
2175(4)
X.Q. Wu
Classification of Single Cereal Grain Kernel Using Shape Parameters Based on Machine Vision
2179(4)
L.L. Wu
J. Wu
Y.X. Wen
L.R. Xiong
Y. Zheng
Detection for Corn/Weed Images Using Moment Invariants by BPNN Classifier
2183(4)
L.L. Wu
J. Wu
Y.X. Wen
H. Peng
Z.H. Zhu
On Implementation of Software Acoustic Cancellation
2187(6)
Y.F. Wang
Y.H. Lv
H.Z. Cai
A New Variable Step Size LMS Adaptive Filtering Algorithm and its Analysis
2193(4)
W.J. Cai
Low SNR Singal Recovery System Based on Stochastic Resonance
2197(4)
H. Deng
H. Liu
B.T. Song
H. Zhang
S. Yang
Research on Improved Image Enhancement Algorithm Based on Fuzzy Set
2201(5)
X.W. Liu
C.Y. Liu
A Novel Method to Estimate the Unknown Mixing Matrix for Blind Source Separation
2206(5)
N. Chen
H.Y. Zhang
An Information Fusion Algorithm Based on Dopplerlet-Hough Transformation
2211(6)
M.H. Deng
Q.S. Zeng
L.Y. Zhang
Study of Adaptive Chaos Embedded Particle Swarm Optimization Algorithm
2217(5)
R. Hua
D.J. Chen
Y.Z. Ye
Radio Channel Research in Coal Mine Laneways
2222(5)
Y. Yang
Y.L. Li
J. Li
Yawning Detection Based on Mouth Feature Points Curve Fitting
2227(5)
W.Y. Ding
L. Zhang
Y.H. Chen
Cartoon Avatar Processing Based on Image Edge Detection
2232(4)
Y.S. Zhang
L.M. Sun
X.H. Shen
Y. Zhou
Y. Li
W. Wang
Analysis of Airplane Timing Equipment's Automatic Test Based on ATS Platform
2236(4)
X.X. Zhan
S.Y. Hao
J.F. Si
Y.F. Zhang
C.F. Yu
Image Texture Feature Extraction & Recognition of Chinese Herbal Medicine Based on Gray Level Co-Occurrence Matrix
2240(5)
Q. Liu
X.P. Liu
L.J. Zhang
L.M. Zhao
Classification of Biological Spectrum Based on Principal Component Cluster Analysis
2245(4)
L.S. Zhang
A.J. Shi
Image Restoration Based on Improved PSO Algorithm
2249(4)
Z.Y. Ye
Convergence of a Class of Nonorthogonal Wavelet
2253(4)
S.G. Zhao
Research on a Kind of Distribution Selection Method for Right Censored Data Based on Data Expansion Algorithm
2257(3)
J.H. Wu
H.B. Liu
Y.D. Wang
J.W. Lei
Improved Vision Based Driving Space Analysis by Condensation of Image Data
2260(5)
Y.F. Mao
H. Wiedmann
M. Chen
Application of the Compound Model of BP Neural Networks and Wavelet Transform in Image Definition Identification
2265(5)
R.K. Gong
Y.N. Zhang
C.H. Wang
L.J. Zhao
An EEG Analysis Research For Epileptics Using Probabilistic Neural Network
2270(4)
X. Xu
J. Song
Y.T. Hu
W.X. Shi
X. Zhu
Object-Oriented Zhangjiangkou Mangrove Communities Classification Using QuickBird Imagery
2274(5)
D.S. Zhang
L.X. Cong
Z.Q. Wang
H. Chen
F. Wang
Applying Data Mining Methods to Structural Identification
2279(5)
M. Horalova Kalinova
G. Michalconok
D. Gabriska
Inter-Harmonic Detection Based on AR Model Spectral Estimation and Nonlinear Optimization
2284(7)
H.Q. Zhang
R. Liu
Z.H. Fu
K. Zheng
Chapter 15 Software and Computer in Research and Engineering Solutions
Ranking Algorithms for Keyword Search over Relational Databases
2291(6)
C. Wang
J. Ding
B. Hu
The Application of Bezier Curves about the Visualization of the Threaded Binary Tree
2297(4)
X.B. Yang
B.Z. Chen
Research and Design of the Automobile OBD Data State Monitoring System Based on the Android Phones
2301(5)
W.D. Huang
Y. Zhang
J.H. Liu
Fidelity Evaluation of Bridge-Type Grab Ship-Unloader Visual Simulation
2306(5)
H.J. Lu
D.F. Chang
X. Liu
Risk Assessment of Smart Grid Cyber Security Based on Multi-Level Fuzzy Comprehensive Evaluation Method
2311(7)
K.W. Zhang
Scene Simulation of UUV's Glide Motion Based on Creator and Vega Prime
2318(5)
P. Zhang
B.W. Song
X.X. Du
Research on the Die Steel Cutting Simulation System Based on Intelligent Layout Algorithm
2323(6)
M.J. Zhou
T.J. Ma
X.J. Zhao
S. Li
Analysis on A 1-out-n Security Protocol Based on Threshold Idea
2329(4)
L. Yu
J.Y. Ye
The Study of Military Conceptual Model Based on Tactical Decision-Making Simulation
2333(4)
J.G. Liu
Z.F. Wu
Managing Emergency Material Distribution Knowledge Using Ontology-Based Modeling for Emergency Distribution Decision
2337(4)
L. Zhang
D.L. Jiang
Y.R. Ju
Q.Z. Wang
P.P. Li
Security Design of Web-Based Information Integrated System
2341(4)
T. Chen
H.P. Pan
The Application of Improved Color Petri Net in Hardware Design
2345(6)
P. Liu
Y.Z. Liu
C.J. Wang
An Approach of Web Service Discovery and Composition Based on Logic Petri Nets
2351(7)
S.Y. Deng
Y.Y. Du
ZigBee Technology Application in Disaster Rescue
2358(4)
F. Jiang
W. Zhao
Parallel Computing Application in Rectangle Packing Problem
2362(4)
X.C. Wang
Z.X. Jin
The Research of Railway Passenger Flow Prediction Model Based on BP Neural Network
2366(4)
Y. Wang
D. Zheng
S.M. Luo
D.M. Zhan
P. Nie
On Visualization of Journals Reference Network Based on Force-Directed Layout Algorithms
2370(5)
X.Y. Du
The Design of the Sensor Node of IOT Based on SIM20
2375(4)
X.H. Kuang
Z.Y. Yao
H.B. Huo
J.J. Li
Y.X. Wu
The Research and Implementation of Geospatial Data Management Based on ArcGIS Service
2379(4)
F. Zheng
H.R. Lu
Y. An
L.J. Guo
Building Bridges among Local Area Networks
2383(4)
J. Chen
Analysis on Internet Attack and Security
2387(4)
J. Chen
Objects Collision Detection in Virtual Scene
2391(4)
R.G. Zhang
Z.F. Wang
X.J. Liu
K. Liu
Research of Digital Watermarking Algorithm Based on DCT Transform
2395(10)
Y.J. Zhang
Weapon-Target Assignment Problem in the Warship Fleet Based on Fast and Elitist Non-Dominated Sorting Genetic Algorithm
X.L. Chen
S. Shen
2399
Early-Warning Model for Tourism Environment Carrying Capacity in Scenic Spots Based on Fuzzy Inference
2405(4)
X.P. Yang
E.C. Li
Simulation and Analysis of AUV's Hydrodynamics when Moving in the Near-Seabed
2409(4)
F.Z. Zhao
B.W. Song
X.X. Du
Research of Digital Simulating Model of Assembling Shunt Capacitor
2413(6)
J.J. Xiong
M. Sun
R.X. Fan
T. Ding
L.J. Qian
A B/S-Based Multi-Server Framework for Knowledge Component Implementation
2419(6)
Z.J. Ming
J. Hao
Y. Yan
G.X. Wang
Numerical Simulation on the Stress and Strain of Lining Structure with Double Shield Tunneling Construction
2425(5)
F. Wang
T.J. Cui
A Collaborative Filtering Recommendation Method Based on Item Category
2430(4)
W.B. Deng
J. Liu
The Vestibular System Modeling in the Head and Eye Movement Research
2434(4)
C.Y. Wang
B. Yao
H.Z. Bi
H.B. Jia
Design and Implementation of Module Hot-Plugging in Equipment Management Platform
2438(4)
S.R. Wang
D.E. Meng
J.S. Zhao
A Quantum-Behaved Particle Swarm Algorithm Combined with Chaotic Mutation
2442(5)
X.R. Li
Y.X. Jin
The Design and Development of Learning Log Management System for C Language Web Classroom
2447(4)
J.J. Chen
Z.S. Ren
Z.H. Fu
Study on Custom Service Combination Based on BPEL
2451(6)
Y.J. Cai
Z. Le
Applying RBF Neural Networks and Genetic Algorithms to Nonlinear System Optimization
2457(4)
H.F. Wang
X.A. Xu
Flow and Density Difference Lattice Model and its Numerical Simulations Analysis
2461(5)
H. Dai
Z.Z. Yuan
J.F. Tian
Study on Network Emergency Evaluation with Web-Based Information
2466(4)
C.M. Wang
An Intelligent Method Optimizing BP Neural Network Model
2470(5)
H.H. Xing
H.Y. Lin
Error Resilience Scheme for Real-Time Video
2475(4)
X.W. Ding
Y.G. Dagnew
A.P. Yang
A Framework for Filtrating Software Measures in Software Measurement Process
2479(4)
J.Z. Wang
J.J. Ding
Research and Implementation on XML-Based Data Exchange Platform
2483(5)
L. Zhao
F. Deng
S.F. Du
The Research and Application of Sorting Algorithm in Aircraft Scheduling Problem
2488(5)
H.R. Xu
L.H. Yang
Q. Huang
J. Wang
Random Choice of Logistics Distribution Route Based on Dynamic Programming
2493(4)
H.J. Zhao
D.M. Huang
Research on Particle Swarm Optimization for Protein Structure Prediction
2497(5)
S.G. Wang
F.J. Wang
S.F. Jiang
H.J. Zhang
On the Construction of Safety Running and Management Systems for Chinese E-Government System
2502(4)
D.P. Zhao
R.X. Zhang
Numerical Simulation of Overpressure about Muzzle Blast Flowfield
2506(4)
Z.X. Guo
Y.T. Pan
K.W. Li
H.Y. Zhang
Application of Visualization and GIS Techniques in Water Conservancy Works
2510(4)
N. Xie
Z. Yang
Efficient Front-End Cache for XEN Virtual Block Device
2514(4)
X. Mi
W. Ye
A. Liang
Development of Information Management System Used in Laboratory
2518(4)
Y. Hu
Intelligent Voice Terminal with Image Retrieval Function
2522(4)
Z.X. Wei
J.M. Liang
Information Service: Podcast Course Video-Sharing System, for Example
2526(4)
W.L. Huang
M.S. Chen
Application of Red Spider Software in Multimedia Network Classroom
2530(4)
S.M. Jia
X.L. Dai
A.Y. Chen
X. Zhou
E-Commerce Model Research Based on Cloud Service
2534(4)
D.J. Ma
Slicing Objects Using UML State Diagram
2538(5)
X. Wang
F. Wei
C. Cheng
Traffic Status Prediction and Analysis Based on Mining Frequent Subgraph Patterns
2543(6)
G. Xu
H.H. Jin
J. Liu
Architecture Design of Urban Intelligent Transportation Using Cloud Computing
2549(4)
J.Z. Wang
Z.J. Wang
The Application Research of Private Cloud in the Data Centers Colleges of Universities
2553(8)
X.P. Wang
L.X. Feng
J.D. Zhao
The Research and Application in Intelligent Document Retrieval Based on Text Quantification and Subject Mapping
2561(8)
Q. Wang
S.N. Qu
T. Du
M.J. Zhang
Research on Evaluation Index System of Multimedia Teaching Software
2569(5)
Y.X. Liu
Z.H. Yuan
W. Shi
Trust Federation of Identity Management in Distributed Environment
2574(5)
D.M. Li
Y.H. Wang
J.Y. Chen
Study on Teaching Method of Project in the Operating System
2579(4)
L.N. He
G.M. Gu
B. Chen
Study on the Software Trustworthiness Measurement Algorithm Based on the Grey Relational Analysis
2583(4)
J.F. Yang
Information Hiding of MS-Office Compound Document
2587(6)
G.M. Zhu
X.G. Zhan
X.L. Zhou
Keyword Index 2593(16)
Author Index 2609