Atjaunināt sīkdatņu piekrišanu

Biohydrometallurgical Recycling of Metals from Industrial Wastes [Hardback]

, (Nanyang Technological University, Singapore), (National Tsing Hua University, Taiwan, R.O.C.)
  • Formāts: Hardback, 212 pages, height x width: 234x156 mm, weight: 521 g
  • Izdošanas datums: 11-Sep-2017
  • Izdevniecība: CRC Press
  • ISBN-10: 1138712612
  • ISBN-13: 9781138712614
Citas grāmatas par šo tēmu:
Biohydrometallurgical Recycling of Metals from Industrial WastesPalielināt
  • Formāts: Hardback, 212 pages, height x width: 234x156 mm, weight: 521 g
  • Izdošanas datums: 11-Sep-2017
  • Izdevniecība: CRC Press
  • ISBN-10: 1138712612
  • ISBN-13: 9781138712614
Citas grāmatas par šo tēmu:
Permanent link: https://www.kriso.lv/db/9781138712614.html
Keywords:
Although many available metal recycling methods are simple and fast, they are also expensive and cause environmental pollution. Biohydrometallurgical processing of metals offers an alternative to overcome these issues, as the use of biological means not only helps to conserve dwindling ore resources but also fulfills the need for the unambiguous need to extract metals in nonpolluting, low-energy, and low-cost way. This book covers biohydrometallurgy and its application in the recovery of metals from secondary sources like wastes. It aims to provide readers with a comprehensive overview of different wastes for metal recovery and biological treatment methods that are both environmentally friendly and economically viable.
Preface xi
Authors xiii
Chapter 1 Introduction
1(18)
1.1 Brief History of Industrial Progress and Generation of Industrial Wastes
1(2)
1.2 Threats of Metal-Containing Wastes to the Environment
3(7)
1.2.1 Lead
6(1)
1.2.2 Chromium
7(1)
1.2.3 Arsenic
7(1)
1.2.4 Zinc
8(1)
1.2.5 Cadmium
8(1)
1.2.6 Copper
9(1)
1.2.7 Mercury
9(1)
1.2.8 Nickel
10(1)
1.3 Advantages of Recycling
10(2)
1.4 Conclusions
12(7)
References
13(6)
Chapter 2 Generation and Composition of Various Metal-Containing Industrial Wastes
19(44)
2.1 Introduction
19(1)
2.2 Electronic Wastes
19(3)
2.2.1 Printed Circuit Boards
20(1)
2.2.2 Solders
21(1)
2.3 Energy Storage Wastes
22(4)
2.3.1 Batteries
22(1)
2.3.1.1 Zinc--Manganese Dioxide Batteries
23(1)
2.3.1.2 Nickel--Cadmium Batteries
24(1)
2.3.1.3 Nickel--Metal Hydride Batteries
24(1)
2.3.1.4 Lithium--Ion Batteries
25(1)
2.3.2 Button Cell Batteries
26(1)
2.4 Metal Production Wastes
26(5)
2.4.1 Slag
26(3)
2.4.2 Dust
29(1)
2.4.3 Foundry Sand
29(2)
2.4.4 Electric Arc Furnace Dust
31(1)
2.5 Solar Photoelectricity Wastes
31(1)
2.5.1 Solar Panels
31(1)
2.6 Power Plant and Incineration Plant Wastes
32(4)
2.6.1 Thermal Power Plant Bottom and Fly Ash
32(2)
2.6.2 Municipal Solid Waste
34(1)
2.6.3 Coal Cleaning or Beneficiation Waste
35(1)
2.7 Petrochemical Wastes
36(1)
2.7.1 Spent Petroleum Catalysts
36(1)
2.8 Sludge
37(1)
2.8.1 Municipal Sewage Sludge
37(1)
2.8.2 Industrial Sludge
38(1)
2.9 Lighting Wastes
38(2)
2.9.1 Light-Emitting Diodes
38(1)
2.9.2 Mercury Light Bulb Wastes
39(1)
2.10 Automobile Wastes
40(1)
2.11 Metal Speciation
41(22)
References
44(19)
Chapter 3 Conventional Metal Recycling Techniques
63(34)
3.1 Introduction
63(1)
3.2 Methods for Metal Recovery
64(19)
3.2.1 Physical/Mechanical Methods
64(1)
3.2.1.1 Screening
64(1)
3.2.1.2 Shape Separation
64(1)
3.2.1.3 Magnetic Separation
64(1)
3.2.1.4 Electric Conductivity--Based Separation
64(1)
3.2.1.5 Density-Based Separation
65(1)
3.2.2 Pyrometallurgical Method
65(1)
3.2.3 Hydrometallurgical Method
66(3)
3.2.4 Microbiological and Biochemical Recycling
69(1)
3.2.4.1 Microbial/Bioleaching Process
70(2)
3.2.4.2 Mechanisms Underlying the Bioleaching Process
72(11)
3.3 Conclusion and Future Perspective
83(14)
References
84(13)
Chapter 4 Recycling of Electronic Waste
97(40)
4.1 Introduction
97(1)
4.2 Bioleaching of Metals from E-Waste
98(32)
4.2.1 Solder
98(2)
4.2.2 Printed Circuit Boards (PCBs)
100(1)
4.2.2.1 Microorganisms for Metal Recovery from PCBs
100(17)
4.2.2.2 Recovery of Gold
117(7)
4.2.3 Kinetics of Metal Recovery
124(1)
4.2.4 Process Optimization for Metal Recovery
124(3)
4.2.5 Use of Biosurfactants in Metal Recovery
127(1)
4.2.6 Leaching Process Using Enzymes
128(2)
4.3 Conclusion
130(7)
References
130(7)
Chapter 5 Recycling of Energy Storage Wastes
137(22)
5.1 Introduction
137(1)
5.2 Bioleaching of Metals from Energy Storage Wastes
137(18)
5.2.1 Battery
137(1)
5.2.1.1 Lithium-Ion Batteries
137(8)
5.2.1.2 Ni--Cd and Ni--MH Batteries
145(6)
5.2.1.3 Zn--Mn Batteries
151(3)
5.2.2 Button Cells
154(1)
5.3 Conclusion
155(4)
References
156(3)
Chapter 6 Recycling of Metal Production Wastes
159(20)
6.1 Introduction
159(1)
6.2 Bioleaching of Slags
159(9)
6.2.1 Cu Smelter Slags
159(7)
6.2.2 Pb/Zn Slags
166(2)
6.3 Bioleaching of Foundry Sand
168(1)
6.4 Bioleaching of Industrial Waste Dust
169(5)
6.4.1 Smelter Dust
169(3)
6.4.2 EAF Dust
172(1)
6.4.3 ESP Dust
173(1)
6.4.4 Industrial Filter Dust
173(1)
6.5 Bioleaching of Industrial Waste Sludge
174(1)
6.6 Conclusion
174(5)
References
174(5)
Chapter 7 Recycling of Solar Electricity Waste
179(4)
7.1 Introduction
179(1)
7.2 Bioleaching of Metals from Solar Electricity Waste
180(1)
7.3 Conclusion
180(3)
References
181(2)
Chapter 8 Recycling of Thermal Power Generation Wastes
183(22)
8.1 Introduction
183(1)
8.2 Bioleaching of Thermal Power Generation Waste
183(17)
8.2.1 Microorganisms for Metal Recovery from Fly Ash
183(15)
8.2.2 Process Optimization for Metal Recovery
198(2)
8.2.3 Kinetics of Metal Recovery
200(1)
8.3 Conclusion
200(5)
References
201(4)
Index 205
Prof. Hong Hocheng is currently the Chair Professor of National Tsing Hua University, Taiwan, R.O.C. He received his Ph.D. from the University of California, Berkeley (1998). He completed his B. Sc. Mechanical Engineering from National Taiwan University, Taiwan, R.O.C. and Diplom-Ingenieur, Manufacturing Engineering from Rheinland-Westfalen Technische Hochschule (Aachen), Germany. He is ASME and AMME Fellow. His fields of interest are innovative manufacturing processes, nontraditional machining, micro/nano manufacturing, fatigue of MEMS, machining of composites. He has around 160 research papers published and 30 international invited paper/review article/keynotes lecture/plenary speech/awardees lecture/book chapter. He is a member of editorial boards of 15 international scientific journals.

Dr. Mital Chakankar received her Ph.D. in Microbiology from Department of Microbiology, Shivaji University, Kolhapur, India. She carried out research in the field of microbial production of biosurfactants, microbial degradation of pollutants, biosensors for detection of microorganisms and biomolecules. She is currently a Postdoctoral Research Fellow at Department of Power Mechanical Engineering, National Tsing Hua University, Taiwan. Her current research interests include bioleaching of metals from industrial wastes. She has published 12 research papers in international journals.

Dr. Umesh Jadhav received his Ph.D. in Environmental Biotechnology from Department of Biochemistry, Shivaji University, Kolhapur, India in 2009. He carried out research in the field of microbial degradation of pollutants, bioleaching of metals. Presently he is Assistant Professor at Department of Microbiology, Savitribai Phule Pune University, Pune, India. He is involved in the application of microorganisms for geotechnical applications He is having 31 research papers published. Also, he has 4 book chapters in his credit.